Tracking Sulfonated Polystyrene Diffusion in a Chitosan/Carboxymethyl Cellulose Layer-by-Layer Film: Exploring the Internal Architecture of Nanocoatings.

Since chitosan presents the ability to interact with a wide range of molecules, it has been one of the most popular natural polymers for the construction of layer-by-layer thin films. In this study, depth-profiling X-ray photoelectron spectroscopy (XPS) was employed to track the diffusion of sulfonated polystyrene (SPS) in carboxymethyl cellulose/chitosan (CMC/Chi) multilayers. Our findings suggest that the CMC/Chi film does not constitute an electrostatic barrier sufficient to block diffusion of SPS, and that diffusion can be controlled by adjusting the diffusion time and the molecular weight of the polymers that compose the CMC/Chi system.

Reversible Self-Healing for Preserving Optical Transparency and Repairing Mechanical Damage in Composites.

This research concentrates on the healing of optical properties, roughness, contact angle hysteresis, and shallow scratches in polymer/nanoparticle composites. A series of ternary composite blends [epoxy/halloysite nanotubes (HNTs)/cellulose acetate butyrate (CAB)] with various CAB concentrations were fabricated and subjected to a series of mechanical damages. The optimized concentration of a nanoparticle is 1.

Investigation of the Internal Chemical Composition of Chitosan-Based LbL Films by Depth-Profiling X-ray Photoelectron Spectroscopy (XPS) Analysis.

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation.

Superoleophilic Titania Nanoparticle Coatings with Fast Fingerprint Decomposition and High Transparency.

Low surface tension sebaceous liquids such as human fingerprint oils are readily deposited on high energy surfaces such as clean glass, leaving smudges that significantly lower transparency. There have been several attempts to prevent formation of these dactylograms on glass by employing oil-repellent textured surfaces. However, nanotextured superoleophobic coatings typically scatter visible light, and the intrinsic thermodynamic metastability of the composite superoleophobic state can result in failure of the oil repellency under moderate contact pressure.

Enhanced Wear Resistance of Transparent Epoxy Composite Coatings with Vertically Aligned Halloysite Nanotubes.

The influence of nanoparticle orientation on wear resistance of transparent composite coatings has been studied. Using a nozzle spray coating method, halloysite nanotubes (HNTs) were aligned in the in-plane and out-of-plane directions and in various randomly oriented states. Nanoscratching, falling sand, and Taber Abrasion tests were used to characterize the wear resistance at different length scales.

Spray-Coated Halloysite-Epoxy Composites: A Means To Create Mechanically Robust, Vertically Aligned Nanotube Composites.

Halloysite nanotube-filled epoxy composites were fabricated using spray-coating methods. The halloysite nanotubes (HNTs) were aligned by the hydrodynamic flow conditions at the spray nozzle, and the polymer viscosity helped to preserve this preferential orientation in the final coatings on the target substrates. Electron microscopy demonstrated a consistent trend of higher orientation degree in the nanocomposite coatings as viscosity increased.

Liposome-Loaded Cell Backpacks.

Cell backpacks, or micron-scale patches of a few hundred nanometers in thickness fabricated by layer-by-layer (LbL) assembly, are potentially useful vehicles for targeted drug delivery on the cellular level. In this work, echogenic liposomes (ELIPs) containing the anticancer drug doxorubicin (DOX) are embedded into backpacks through electrostatic interactions and LbL assembly. Poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA)n , and poly(diallyldimethylammonium chloride)/poly(styrene sulfonate) (PDAC/SPS)n film systems show the greatest ELIP incorporation of the films studied while maintaining the structural integrity of the vesicles.

Optimization of amine-rich multilayer thin films for the capture and quantification of prostate-specific antigen.

It is demonstrated that poly(allylamine hydrochloride)/poly(styrenesulfonate) (PAH/SPS) multilayer films can be successfully tailored for the capture and detection of small biomolecules in dilute concentrations. Based on in vitro results, these films could be potentially applied for rapid and high-throughput diagnosis of dilute biomarkers in serum or tissue. PAH presents functional amino groups that can be further reacted with desired chemistries in order to create customizable and specific surfaces for biomolecule capture.

Determination of lithium-ion distributions in nanostructured block polymer electrolyte thin films by X-ray photoelectron spectroscopy depth profiling.

X-ray photoelectron spectroscopy (XPS) depth profiling with C60(+) sputtering was used to resolve the lithium-ion distribution in the nanometer-scale domain structures of block polymer electrolyte thin films. The electrolytes of interest are mixtures of lithium trifluoromethanesulfonate and lamellar-forming polystyrene-poly(oligo(oxyethylene)methacrylate) (PS-POEM) copolymer. XPS depth profiling results showed that the lithium-ion concentration was directly correlated with the POEM concentration.

Design and fabrication of zwitter-wettable nanostructured films.

Manipulating surface properties using chemistry and roughness has led to the development of advanced multifunctional surfaces. Here, in a nanostructured polymer film consisting of a hydrophilic reservoir of chitosan/carboxymethyl cellulose capped with various hydrophobic layers, we demonstrate the role of a third design factor, water permeation rate. We use this additional design criterion to produce antifogging coatings that readily absorb water vapor while simultaneously exhibiting hydrophobic character to liquid water.

Monocyte-mediated delivery of polymeric backpacks to inflamed tissues: a generalized strategy to deliver drugs to treat inflammation.

Targeted delivery of drugs and imaging agents to inflamed tissues, as in the cases of cancer, Alzheimer's disease, Parkinson's disease, and arthritis, represents one of the major challenges in drug delivery. Monocytes possess a unique ability to target and penetrate into sites of inflammation. Here, we describe a broad approach to take advantage of the natural ability of monocytes to target and deliver flat polymeric particles ("Cellular Backpacks") to inflamed tissues.

Tuning the properties of mucin via layer-by-layer assembly.

Multilayer films consisting of bovine submaxillary mucin (BSM) and poly(allylamine hydrochloride) (PAH) were prepared on various substrates using layer-by-layer assembly. The effects of both the assembly pH and ionic strength on multilayer characteristics were investigated by assessing film thicknesses (10-80 nm), surface wetting characteristics, and cell repulsion. Also, the dynamic assembly behavior was monitored using quartz crystal microbalance with dissipation monitoring (QCM-D) to further understand the effect of assembly pH on film characteristics.

Sugar-mediated disassembly of mucin/lectin multilayers and their use as pH-Tolerant, on-demand sacrificial layers.

The layer-by-layer (LbL) assembly of thin films on surfaces has proven to be an extremely useful technology for uses ranging from optics to biomedical applications. Releasing these films from the substrate to generate so-called free-standing multilayer films opens a new set of applications. Current approaches to generating such materials are limited because they can be cytotoxic, difficult to scale up, or have undesirable side reactions on the material.

Quantification of feather structure, wettability and resistance to liquid penetration.

Birds in the cormorant (Phalacrocoracidae) family dive tens of metres into water to prey on fish while entraining a thin layer of air (a plastron film) within the microstructures of their feathers. In addition, many species within the family spread their wings for long periods of time upon emerging from water. To investigate whether wetting and wing-spreading are related to feather structure, microscopy and photographic studies have previously been used to extract structural parameters for barbs and barbules.

Industrial-scale spray layer-by-layer assembly for production of biomimetic photonic systems.

Layer-by-layer assembly is a powerful and flexible thin film process that has successfully reproduced biomimetic photonic systems such as structural colour. While most of the seminal work has been carried out using slow and ultimately unscalable immersion assembly, recent developments using spray layer-by-layer assembly provide a platform for addressing challenges to scale-up and manufacturability. A series of manufacturing systems has been developed to increase production throughput by orders of magnitude, making commercialized structural colour possible.

pH-Programmable Sequential Dissolution of Multilayer Stacks of Hydrogen-Bonded Polymers.

We report that the interlayer diffusion of polymer chains within heterostructured hydrogen-bonded multilayer films depends on the stacking order: polymers diffuse more when high pH stability polymer pairs are assembled on top of low pH stability polymer pairs. By varying the stacking sequence, the fraction of the film that is released from the substrate can be tuned to achieve sequential pH-programmed release of the multilayer film. Also, we show that a multifunctional freestanding film with tunable film thickness can be generated by appropriate stacking and subsequent thermal cross-linking.

Orientation-specific attachment of polymeric microtubes on cell surfaces.

Tubular particles presenting heterogeneous regions of chemistry on the tube-ends versus the side are fabricated and are shown to control the particle orientation on the surface of live lymphocytes. Controlling the orientation of anisotropic microparticles on cell surfaces is of interest for biomedical applications and drug delivery in particular, since it can be used to promote or resist particle internalization.

Depth-profiling X-ray photoelectron spectroscopy (XPS) analysis of interlayer diffusion in polyelectrolyte multilayers.

Functional organic thin films often demand precise control over the nanometer-level structure. Interlayer diffusion of materials may destroy this precise structure; therefore, a better understanding of when interlayer diffusion occurs and how to control it is needed. X-ray photoelectron spectroscopy paired with C60(+) cluster ion sputtering enables high-resolution analysis of the atomic composition and chemical state of organic thin films with depth.

Zwitter-wettability and antifogging coatings with frost-resisting capabilities.

Antifogging coatings with hydrophilic or even superhydrophilic wetting behavior have received significant attention due to their ability to reduce light scattering by film-like condensation. However, under aggressive fogging conditions, these surfaces may exhibit frost formation or excess and nonuniform water condensation, which results in poor optical performance of the coating. In this paper, we show that a zwitter-wettable surface, a surface that has the ability to rapidly absorb molecular water from the environment while simultaneously appearing hydrophobic when probed with water droplets, can be prepared by using hydrogen-bonding-assisted layer-by-layer (LbL) assembly of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA).

Templated nanopores for robust functional surface porosity in poly(methyl methacrylate).

A novel "sink and etch" technique is used to generate stable surface nanoporosity in poly(methyl methacrylate). Layer-by-layer assembly is first used to conformally coat PMMA substrates with a uniform layer of silica nanoparticles. Thermal annealing is then applied to cause sinking and engulfment of the silica nanoparticles into the thermoplastic PMMA surface.

Layer-by-layer deposition of all-nanoparticle multilayers in confined geometries.

Nanofluidic arrays containing high-aspect-ratio nanochannels were used as a platform for the deposition of all nanoparticle multilayers. LbL assembly of 6 nm titania and 15 nm silica nanoparticles resulted in conformal multilayers of uniform thickness throughout the nanochannels. These multilayers are inherently nanoporous with void volume fractions of about 0.

Spray-layer-by-layer assembly can more rapidly produce optical-quality multistack heterostructures.

Automated spray-layer-by-layer (LbL) assembly was used to create highly reflective structurally colored thin films with high reflectance at near-UV light wavelengths. Reflectance peaks were tuned by fabricating alternating stacks of high (TiO(2) nanoparticles) and low (SiO(2) nanoparticles) refractive index materials using a non-quarter-wave design. Spray-assembled multilayer heterostructures fabricated with up to 840 individual polymer or nanoparticle deposition steps presented similar roughness and refractive index values compared to Bragg stacks obtained via immersion LbL assembly.