Electrocoagulation of landfill leachate: Transforming a hazardous residue into a source of irrigation water.

Electrocoagulation of landfill leachate has been widely investigated, however, only few reports include the reuse of the treated water. In this work, treated leachate is evaluated as irrigation water. The main obstacle is the high Sodium Absorption Ratio (SAR=Na/(Ca+Mg)/2.

Application of electrocoagulation for the efficient pollutants removal to reuse the treated wastewater in the dyeing process of the textile industry.

The possibility of using electrocoagulation for efficient removal of pollutants in the industrial liquid waste of a textile industry was studied. The performance of the process was evaluated through the analysis of color, turbidity, and chemical oxygen demand (COD). The analysis was first done with the wastewater coming from the process of dyeing linen, which is the most polluting of all effluents that reach the residual effluent pool (REP).

Genotoxicity and toxicity evaluations of ECF cellulose bleaching effluents using the Allium cepa L. test.

Toxicity and genotoxicity tests were performed on root cells of Allium cepa in order to evaluate wastewater quality following an ECF cellulose bleaching process. The results revealed a toxic effect of the effluent, with inhibition of meristem growth and generally lower values of metaphase, anaphase and telophase indices at pH 10.5 than pH 7 for all effluent concentrations.

Decolorization of kraft bleaching effluent by advanced oxidation processes using copper (II) as electron acceptor.

Two advanced oxidation processes (AOPs), TiO2/UV/O2 and TiO2/UV/Cu (II), were used to remove color from a Kraft bleaching effluent. The optimal decoloration rate was determined by multivariate analysis, obtaining a mathematical model to evaluate the effect among variables. TiO2 and Cu (II) concentrations and the reaction times were optimized.

Reactive dyes decolouration by TiO2 photo-assisted catalysis.

The photocatalytic degradation of three reactive azo dyes (yellow-2, orange-16 and red-2) and one anthraquinone reactive dye (blue-19) was studied. The reactions were carried out in a reactor with recirculation using TiO2 immobilised on glass Raschig rings (system A) and compared with a batch system using the catalyst in aqueous suspension (system B). Both reaction systems were irradiated with a 125 W, lambda > 254 nm lamp.