Laser-Assisted Field Evaporation of Chromia with Deep Ultraviolet Laser Light.

In this work, samples of chromia (Cr2O3) scale have been prepared for atom probe tomography and field evaporated with deep ultraviolet laser light (258 nm wavelength). The investigated range of laser energies spans more than three orders of magnitude between 0.03 and 90 pJ.

Oxidation of a zirconium nitride multilayer-covered knee implant after two years in clinical use.

The surface composition and microstructure of an up to 5 µm thick multilayer on a knee implant were investigated. When the implant was explanted after approximately two years of clinical use due to failure from aseptic loosening, the topmost ZrN layer was found to be oxidized. Interestingly, only the non-articulating area was visibly oxidized (color change).

Revisiting Compositional Accuracy of Carbides Using a Decreased Detector Efficiency in a LEAP 6000 XR Atom Probe Instrument.

The accuracy of carbon composition measurement of carbide precipitates in steel or other alloys is limited by the evaporation characteristics of carbon and the performance of current detector systems. Carbon evaporates in a higher fraction as clustered ions leading to detector pile-up during so-called multiple hits. To achieve higher accuracy, a grid was positioned behind the local electrode, reducing the detection efficiency from 52 to 7% and thereby reducing the fraction of multi-hit events.

Silica-embedded Gold Nanoparticles Analyzed by Atom Probe Tomography.

Nanoparticles are utilized in a multitude of applications due to their unique properties. Consequently, characterization of nanoparticles is crucial, and various methods have been employed in these pursuits. One such method is Atom Probe Tomography (APT).

Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy.

Atom probe tomography (APT) was utilized to supplement scanning electron microscopy (SEM) characterization of a precipitation strengthening nickel-based superalloy, Alloy 247LC, processed by laser powder bed fusion (L-PBF). It was observed that the material in the as-built condition had a relatively high strength. Using both SEM and APT, it was concluded that the high strength was not attributed to the typical precipitation strengthening effect of γ'.