Effect of oral caroverine in the treatment of tinnitus: A quasi-experimental study.

Objective: Caroverine is an antagonist of non-NMDA and NMDA glutamate receptors. Cochlear synaptic tinnitus arises from a synaptic disturbance of NMDA or non-NMDA receptors on the afferent dendrites of spiral ganglion neurons. This forms a basis for the use of caroverine in the treatment of tinnitus.

Material properties and finite element analysis of adhesive cements used for zirconia crowns on dental implants.

This study aimed to evaluate the material properties of four dental cements, analyze the stress distribution on the cement layer under various loading conditions, and perform failure analysis on the fractured specimens retrieved from mechanical tests. Microhardness indentation testing is used to measure material hardness microscopically with a diamond indenter. The hardness and elastic moduli of three self-adhesive resin cements (SARC), namely, DEN CEM (DENTEX, Changchun, China), Denali (Glidewell Laboratories, CA, USA), and Glidewell Experimental SARC (GES-Glidewell Laboratories, CA, USA), and a resin-modified glass ionomer (RMGI-Glidewell Laboratories, CA, USA) cement, were measured using microhardness indentation.

Determination of elastic moduli of polymeric materials using microhardness indentation.

Young's modulus of elasticity (or stiffness, E) is an important material property for many applications of polymers and polymer-matrix composites. The common methods of measuring E are by measuring the velocity of ultrasonic pulses through the material or by resistance to flexure, but it is difficult for ultrasound to penetrate polymers that contain filler particles, and flexural measurements require large specimens that may not mimic the clinical case. Thus, it may be difficult to determine E using conventional techniques.

Influence of Different Surface Finishing Protocols on the Wear Behavior of Lithium Disilicate Glass-Ceramics.

Purpose: To evaluate the effect of different finishing protocols on the wear behavior of lithium disilicate glass-ceramics (LD).

Materials And Methods: Specimens were produced from LD prefabricated CAD/CAM blocks and divided into three groups according to the surface treatment (n = 8): control, polishing, and glaze. Ceramic specimens were subjected to wear testing using a dual-axis chewing simulator.

Improving Fracture Resistance of 5Y-PSZ-Based Three-Unit Bridge Prostheses.

Purpose: To investigate the effect of BruxZir Steel treatment on the fracture resistance of zirconia threeunit bridges prepared using 5Y-PSZ-based zirconia blanks.

Materials And Methods: Three-unit zirconia bridges were milled using CAD/CAM from homogeneous bisque zirconia blanks (5Y-PSZ-based) supplied by various manufacturers and sintered. Fracture resistance was analyzed with dynamic loading.