Electrochemical sensing platform with gold nanoparticles capped by PDDA for benzyl alcohol determination.

An electrochemical sensor has been developed, by modifying screen-printed carbon devices (SPCE) with photochemically synthesized gold nanoparticles (AuNP), to determine benzyl alcohol, a preservative widely used in the cosmetic industry. To obtain the AuNP with the best properties for electrochemical sensing applications, the photochemical synthesis was optimized using chemometric tools. A response surface methodology based on central composite design was used to optimize the synthesis conditions, as irradiation time, and the concentrations of metal precursor and the capping/reducing agent (poly(diallyldimethylammonium) chloride, PDDA).

An environmentally friendly approach for the characterization of construction materials: determination of trace, minor, and major elements by slurry sampling high-resolution continuum source graphite furnace atomic absorption spectrometry.

A slurry sampling method was developed for the fast determination of Pb, Ni, Fe, and Mn in construction materials by high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GFAAS). For sample introduction into the GF, stable slurries were prepared by sonicating 10 mg of ground solid sample in 10.0 mL of 1% (v/v) Triton X-100 and 1% (v/v) HNO solution for 1.

A MWCNTs-COOH/PSS nanocomposite-modified screen-printed electrode for the determination of synthetic phenolic antioxidants by HPLC with amperometric detection.

New sensing platforms based on screen-printed carbon electrodes modified with composites based on polystyrene sulfonate and oxidized multi-walled carbon nanotubes (PSS/MWCNTs-COOH/SPCE) have been used to develop a novel HPLC method with electrochemical detection (ECD) for the determination of the most used synthetic phenolic antioxidants in cosmetics: butylhydroxytoluene (BHT), butylhydroxyanisole (BHA), tert-butylhydroquinone (TBHQ) and propyl gallate (PG). Optimal separation conditions were achieved using methanol: 0.10 mol L acetate solution at pH 6 as mobile phase with a gradient elution program from 60 to 90% of methanol percentage in 15 min.

Disposable screen-printed carbon-based electrodes in amperometric detection for simultaneous determination of parabens in complex-matrix personal care products by HPLC.

Parabens are chemicals widely used as preservatives in different types of industrial products. In recent years, the concern about the safety of these compounds has increased due to their endocrine disrupting activity. For this reason, their use is highly regulated and even some of them have already been banned.

Direct solid sampling of biological species for the rapid determination of selenium by high-resolution continuum source graphite furnace atomic absorption spectrometry.

A direct solid sampling method based on high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GFAAS) for the determination of selenium (Se) in biological tissues was optimized. The main analytical line of Se at 196.0267 nm was used to carry out all HR-CS AAS measurements.

Methylisothiazolinone response on disposable electrochemical platforms modified with carbon, nickel or gold-based nanomaterials.

Screen-printed carbon electrodes (SPCE) were modified with nanocomposite membranes based on polystyrene sulfonate (PSS) or poly(diallyldimethylammonium) (PDDA) matrices and different nanomaterials. Carbon nano-powders (CnP), carbon nano-fibers (CnF) and multi-walled carbon nano-tubes (MWCNTs) were incorporated on PSS matrix. Nickel was incorporated by ion exchange in PSS-CnP composite membranes.

Micro-sampling method based on high-resolution continuum source graphite furnace atomic absorption spectrometry for calcium determination in blood and mitochondrial suspensions.

A micro-sampling and straightforward method based on high resolution continuum source atomic absorption spectrometry (HR-CS AAS) was developed to determine extracellular and intracellular Ca in samples of interest in clinical and biomedical analysis. Solid sampling platforms were used to introduce the micro-samples into the graphite furnace atomizer. The secondary absorption line for Ca, located at 239.

Determination of essential elements in beverages, herbal infusions and dietary supplements using a new straightforward sequential approach based on flame atomic absorption spectrometry.

A simple method based on FAAS was developed for the sequential multi-element determination of Cu, Zn, Mn, Mg and Si in beverages and food supplements with successful results. The main absorption lines for Cu, Zn and Si and secondary lines for Mn and Mg were selected to carry out the measurements. The sample introduction was performed using a flow injection system.

Electrochemical sensor based on polystyrene sulfonate-carbon nanopowders composite for Cu (II) determination.

A differential pulse anodic stripping voltammetric (DPASV) method, with an open circuit (OC) approach in the pre-concentration step has been developed for copper ion determination at very low concentration level using a sensor based on a polystyrene sulfonate-carbon nanopowders (PSS-CnP) composite. This composite material is easily prepared from ultrasonic assisted dispersions of CnP in aqueous solution of PSS. For preparation of sensor devices, a reproducible and inexpensive drop coating procedure of the surface of home-made pencil graphite electrodes (PGEs) using a CnP dispersion in PSS was performed.

Fast sequential multi-element determination of major and minor elements in environmental samples and drinking waters by high-resolution continuum source flame atomic absorption spectrometry.

The fast sequential multi-element determination of 11 elements present at different concentration levels in environmental samples and drinking waters has been investigated using high-resolution continuum source flame atomic absorption spectrometry. The main lines for Cu (324.754 nm), Zn (213.

Sensitive and selective determination of phenolic compounds from aromatic plants using an electrochemical detection coupled with HPLC method.

Introduction: Phenolic compounds contained in essential oils from plants are responsible for their anti-oxidant capacity. The natural extract from each aromatic plant is characterised by a typical ratio of phenolic components, so each one of the essential oils shows different properties.

Objective: The development of a simple reversed-phase high-performance liquid chromatographic (RP-HPLC) method for the determination of phenolic compounds from aromatic plants using spectrophotometric detection with a diode-array and electrochemical detection with amperometric and coulometric detectors.

Simultaneous and direct determination of iron and nickel in biological solid samples by high-resolution continuum source graphite furnace atomic absorption spectrometry.

The simultaneous and direct determination of nickel and iron in plants and lichens has been investigated using high-resolution continuum source graphite furnace atomic absorption spectrometry. The primary resonance line for nickel at 232.003 nm and the adjacent secondary line for iron at 232.

Direct and rapid determination of ultratrace heavy metals in solid plant materials by ET-AAS ultrasonic-assisted slurry sampling.

Introduction: Plants can be used as bioindicators in the study of contamination processes by heavy metals. Most of the analytical methodologies used for determination of metals in plants are based on atomic techniques with previous wet digestion of the solid samples. Methodologies that allow direct metal measurements in solid samples are very attractive alternatives.

Screen-printed sensor for batch and flow injection potentiometric chromium(VI) monitoring.

A disposable screen-printed electrode was designed and evaluated for direct detection of chromium(VI) in batch and flow analysis. The carbon screen-printed electrode was modified with a graphite-epoxy composite. The optimal graphite-epoxy matrix contains 37.

Flow and batch systems for copper(II) potentiometric sensing.

A new carbon paste electrode modified with tetramethyl thiuram disulfide is prepared to use as copper potentiometric sensor in batch and flow analysis. The influence of pH and carbon paste composition on the potentiometric response is studied. The principal parameters of the flow system are optimized and the detection limits and the selectivity coefficients of the potentiometric sensor are calculated for static and flow mode.

Potentiometric carbon paste sensors for lead(II) based on dithiodibenzoic and mercaptobenzoic acids.

Dithiodibenzoic (DTB) acid and mercaptobenzoic (MB) acid were studied to characterize their abilities as modifier agents for lead(II) sensors. For both sensors, the best results were obtained with modified carbon paste electrodes with 24.1% of ligand.

Study of fractionation and potential mobility of metal in sludge from pyrite mining and affected river sediments: changes in mobility over time and use of artificial ageing as a tool in environmental impact assessment.

Sludge from mining exploitation can be a source of land and water contamination in the adjacent zone. Accidents such as the break of waste mining pools in the Aznalcollar Mine (Seville, Spain) in 1998 produce important ecological disasters. In this work is presented a study of the evolution of aqua regia leachable concentration and mobility of metals in sediment samples of Guadiamar River basin from the accident date up to 2001.