Nitrogen Removal Efficiency for Pharmaceutical Wastewater with a Single-Stage Anaerobic Ammonium Oxidation Process.

A single-stage anaerobic ammonium oxidation (ANAMMOX) process with an integrated biofilm-activated sludge system was carried out in a laboratory-scale flow-through reactor (volume = 57.6 L) to treat pharmaceutical wastewater containing chlortetracycline. Partial nitrification was successfully achieved after 48 days of treatment with a nitrite accumulation of 70%.

Modeling of completely autotrophic nitrogen removal process with salt and glycine betaine addition.

The susceptibility of the completely autotrophic nitrogen removal over nitrite (CANON) process to high salinity limits its widespread application. The addition of glycine betaine (GB), a type of compatible solutes that could resist osmotic stress, could be an effective strategy to enhance the salt tolerance ability of aerobic and anaerobic ammonium oxidizing bacteria (AOB and anammox bacteria) involved in the CANON process. This study aims to make use of mathematical modeling to systematically investigate the effects of salt and GB addition on the activities of AOB and anammox bacteria and the treatment performance of the CANON process.

The application of glycine betaine to alleviate the inhibitory effect of salinity on one-stage partial nitritation/anammox process.

One-stage partial nitritation/anammox (PN/A) has been proposed as a sustainable method for removing nitrogen from various wastewater. However, the activities of ammonium-oxidizing bacteria (AOB) and anammox bacteria are often inhibited by the exposure to salinity, thereby hindering their wide application in treating industrial wastewater with high salinity. This study reports that the addition of glycine betaine (GB), which is a compatible solute, could alleviate the inhibitory effects of salinity on both AOB and anammox, thereby improving nitrogen removal performance in a one-stage PN/A system.

Inhibitive effects of chlortetracycline on performance of the nitritation-anaerobic ammonium oxidation (anammox) process and strategies for recovery.

The short- and long-term effects of chlortetracycline (CTC) on the nitritation- anaerobic ammonium oxidation (anammox) process were evaluated. The half maximal inhibitory concentration of CTC in the batch tests of the nitritation-anammox process was 278.91mg/L at an exposure time of 12hr.

Short- and long-term effects of manganese, zinc and copper ions on nitrogen removal in nitritation-anammox process.

This study provided a deep insight into the impacts of trace elements (Mn, Zn and Cu) on nitritation-anammox process. For short-term exposure, all the three elements could improve the nitrogen removal rate (NRR) and the optimal concentrations were 2.0 mg/L, 2.

Feasibility of conventional and single-stage anaerobic ammonium oxidation processes for treating chlortetracycline wastewater.

Conventional and single-stage anaerobic ammonium oxidation (ANAMMOX) was carried out in bench-scale reactors to treat chlortetracycline (CTC) wastewater. The total nitrogen (TN) removal efficiency and rate for conventional ANAMMOX was 66.6 ± 5.