Advances in Spectro-Microscopy Methods and their Applications in the Characterization of Perovskite Materials.

Perovskite materials are promising contenders as the active layer in light-harvesting and light-emitting applications if their long-term stability can be sufficiently increased. Chemical and structural engineering are shown to enhance long-term stability, but the increased complexity of the material system also leads to inhomogeneous functional properties across various length scales. Thus, scanning probe and high-resolution microscopy characterization techniques are needed to reveal the role of local defects and the results promise to act as the foundation for future device improvements.

Nanoscale elemental and morphological imaging of nitrogen-fixing cyanobacteria.

Nitrogen-fixing cyanobacteria bind atmospheric nitrogen and carbon dioxide using sunlight. This experimental study focused on a laboratory-based model system, Anabaena sp., in nitrogen-depleted culture.

Tongqiao Yizhi granule repress the nuclear factor kappa-b/nucleotide oligomerization domain-like receptors 3/caspase-1 pyroptosis pathway in the hippocampus to counter vascular dementia in rats.

Objective: To explore the mechanism by which Tongqiao Yizhi granule (, TQYZKL) intervenes pyroptosis to treat vascular dementia (VaD) in a rat model.

Methods: The rat model of VaD was established by two-vessel occlusion (2VO). The rats were randomly divided into Sham group, Model group, Nimodipine group, TQYZKL (6.

Cl alloying improves thermal stability and increases luminescence in iodine-rich inorganic perovskites.

The inorganic perovskite CsPbI shows promising photophysical properties for a range of potential optoelectronic applications but is metastable at room temperature. To address this, Br can be alloyed into the X-site to create compositions such as CsPbIBr that are stable at room temperature but have bandgaps >1.9 eV - severely limiting solar applications.

Selective C(sp)-S Bond Cleavage of Thioethers to Build Up Unsymmetrical Disulfides.

The selective C(sp)-S bond cleavage of thioethers was first developed to prepare unsymmetrical disulfides by using electrophilic halogenation reagents. In this strategy, NBS (-bromosuccinimide) achieves selective furfuryl C(sp)-S bond cleavage of furfuryl alkylthioethers at room temperature. Meanwhile, NFSI (-fluorobenzenesulfonimide) enables selective methyl C(sp)-S bond cleavage of aryl and alkyl methylthioethers at an elevated temperature.

Periplasmic biomineralization for semi-artificial photosynthesis.

Semiconductor-based biointerfaces are typically established either on the surface of the plasma membrane or within the cytoplasm. In Gram-negative bacteria, the periplasmic space, characterized by its confinement and the presence of numerous enzymes and peptidoglycans, offers additional opportunities for biomineralization, allowing for nongenetic modulation interfaces. We demonstrate semiconductor nanocluster precipitation containing single- and multiple-metal elements within the periplasm, as observed through various electron- and x-ray-based imaging techniques.

Synchrotron-based X-ray fluorescence microscopy mapping the ionome of a toxic freshwater cyanobacterium.

Harmful algal blooms (HABs) pose a major environmental concern across the globe. In abundance, cyanobacteria, or so-called green-blue algae can produce extremely dangerous cyanotoxins that harm humans and animals. This study focused on the mapping and distribution of intracellular macro-and micronutrients of the wide-spread freshwater cyanobacteria Microcystis aeruginosa (M.

Ligand Tailoring Strategy of a Metal-Organic Framework for Optimizing Methane Storage Working Capacities.

Methane, as the main component of natural gas, shale gas, and marsh gas, is regarded as an ideal clean energy to replace traditional fossil fuels and reduce carbon emissions. Porous materials with superior methane storage capacities are the key to the wide application of adsorbed natural gas technology in vehicle transportation. In this work, we applied a ligand tailoring strategy to a metal-organic framework (NOTT-101) to fine-tune its pore geometry, which was well characterized by gas and dye sorption measurements.

A reliable workflow for improving nanoscale X-ray fluorescence tomographic analysis on nanoparticle-treated HeLa cells.

Scanning X-ray fluorescence (XRF) tomography provides powerful characterization capabilities in evaluating elemental distribution and differentiating their inter- and intra-cellular interactions in a three-dimensional (3D) space. Scanning XRF tomography encounters practical challenges from the sample itself, where the range of rotation angles is limited by geometric constraints, involving sample substrates or nearby features either blocking or converging into the field of view. This study aims to develop a reliable and efficient workflow that can (1) expand the experimental window for nanoscale tomographic analysis of local areas of interest within a laterally extended specimen, and (2) bridge 3D analysis at micrometer and nanoscales on the same specimen.

Formation of a Secondary Phase in Thermally Evaporated MAPbI and Its Effects on Solar Cell Performance.

Thermal evaporation is a promising deposition technique to scale up perovskite solar cells (PSCs) to large areas, but the lack of understanding of the mechanisms that lead to high-quality evaporated methylammonium lead triiodide (MAPbI) films gives rise to devices with efficiencies lower than those obtained by spin coating. This work investigates the crystalline properties of MAPbI deposited by the thermal coevaporation of PbI and MAI, where the MAI evaporation rate is controlled by setting different temperatures for the MAI source and the PbI deposition rate is controlled with a quartz crystal microbalance (QCM). Using grazing incident wide-angle X-ray scattering (GIWAXS) and X-ray diffraction (XRD), we identify the formation of a secondary orthorhombic phase (with a space group) that appears at MAI source temperatures below 155 °C.

Development of Multi-Scale X-ray Fluorescence Tomography for Examination of Nanocomposite-Treated Biological Samples.

Research in cancer nanotechnology is entering its third decade, and the need to study interactions between nanomaterials and cells remains urgent. Heterogeneity of nanoparticle uptake by different cells and subcellular compartments represent the greatest obstacles to a full understanding of the entire spectrum of nanomaterials' effects. In this work, we used flow cytometry to evaluate changes in cell cycle associated with non-targeted nanocomposite uptake by individual cells and cell populations.

A fabrication process for flexible single-crystal perovskite devices.

Organic-inorganic hybrid perovskites have electronic and optoelectronic properties that make them appealing in many device applications. Although many approaches focus on polycrystalline materials, single-crystal hybrid perovskites show improved carrier transport and enhanced stability over their polycrystalline counterparts, due to their orientation-dependent transport behaviour and lower defect concentrations. However, the fabrication of single-crystal hybrid perovskites, and controlling their morphology and composition, are challenging.

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics.

Surface trap-mediated nonradiative charge recombination is a major limit to achieving high-efficiency metal-halide perovskite photovoltaics. The ionic character of perovskite lattice has enabled molecular defect passivation approaches through interaction between functional groups and defects. However, a lack of in-depth understanding of how the molecular configuration influences the passivation effectiveness is a challenge to rational molecule design.

Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites.

The role of the alkali metal cations in halide perovskite solar cells is not well understood. Using synchrotron-based nano-x-ray fluorescence and complementary measurements, we found that the halide distribution becomes homogenized upon addition of cesium iodide, either alone or with rubidium iodide, for substoichiometric, stoichiometric, and overstoichiometric preparations, where the lead halide is varied with respect to organic halide precursors. Halide homogenization coincides with long-lived charge carrier decays, spatially homogeneous carrier dynamics (as visualized by ultrafast microscopy), and improved photovoltaic device performance.

Understanding Detrimental and Beneficial Grain Boundary Effects in Halide Perovskites.

Grain boundaries play a key role in the performance of thin-film optoelectronic devices and yet their effect in halide perovskite materials is still not understood. The biggest factor limiting progress is the inability to identify grain boundaries. Noncrystallographic techniques can misidentify grain boundaries, leading to conflicting literature reports about their influence; however, the gold standard - electron backscatter diffraction (EBSD) - destroys halide perovskite thin films.

A Wearable Colorimetric Dosimeter to Monitor Sunlight Exposure.

The personal ultraviolet (UV) dosimeter is a useful measurement tool to prevent UV induced dermal damages; however, conventional digital dosimeters are either bulky or require external power sources. Here, a wearable, colorimetric UV film dosimeter that provides color transition, from purple to transparent, is reported to indicate the UV dose. The film dosimeter is made of a purple photodegradable dye ((2Z,6Z)-2,6-bis(2-(2,6-diphenyl-4H-thiopyran-4-ylidene)ethylidene)cyclohexanone or DTEC) blended in low density polyethylene film.

Direct Observation of Halide Migration and its Effect on the Photoluminescence of Methylammonium Lead Bromide Perovskite Single Crystals.

Optoelectronic devices based on hybrid perovskites have demonstrated outstanding performance within a few years of intense study. However, commercialization of these devices requires barriers to their development to be overcome, such as their chemical instability under operating conditions. To investigate this instability and its consequences, the electric field applied to single crystals of methylammonium lead bromide (CH NH PbBr ) is varied, and changes are mapped in both their elemental composition and photoluminescence.

Graphene-Induced Oriented Interfacial Microstructures in Single Fiber Polymer Composites.

Interfacial interactions between the polymer and graphene are pivotal in determining the reinforcement efficiency in the graphene-enhanced polymer nanocomposites. Here, we report on the dynamic process of graphene-induced oriented interfacial crystals of isotactic polypropylene (iPP) in the single fiber polymer composites by means of polarized optical microscopy (POM) and scanning electron microscopy (SEM). The graphene fibers are obtained by chemical reduction of graphene oxide fibers, and the latter is produced from the liquid crystalline dispersion of graphene oxide via a wet coagulation route.

Nematic order drives macroscopic patterns of graphene oxide in drying drops.

We report on a series of experiments on large-area ordered patterns of graphene oxide on solid substrates deposited from aqueous dispersions by directed drop evaporation. The aqueous dispersion of graphene oxide exhibits phase transitions from isotropic to liquid crystalline nematic phases via a biphasic region with increasing concentration. In the single nematic phase, schlieren textures accompanied by oriented bands are frequent.

Dynamic interactions between poly(3-hexylthiophene) and single-walled carbon nanotubes in marginal solvent.

Interfacial interactions between conjugated polymers and carbon nanotubes are pivotal in determining the device performance of nanotube-based polymer electronic devices. Here, we report on interfacial structures and crystallization kinetics of poly(3-hexylthiophene) (P3HT) in the presence of single-walled carbon nanotubes (SWNTs) in anisole by means of transmission electron microscope (TEM) and ultraviolet-visible (UV-vis) absorption spectroscopy. Confined on SWNT surfaces, the P3HT forms nanofibril crystals perpendicular to the long axis of SWNTs.