Effects of 3D Airway Geometry on the Airflow of Adults with Cleft Lip and Palate and Obstructive Sleep Apnea: A Functional Imaging Study.

 Individuals with cleft lip and palate (CLP) are at a high risk of developing obstructive sleep apnea (OSA). Hypothetically, the severity of OSA might be associated with the morphology of the upper airway (UAW) and the characteristics of the airflow. Thus, the present study aimed to assess and compare, in adults with CLP and skeletal class-III discrepancy, with or without OSA, simulations of airflow resistance and pressure according to the geometrical characteristics of the UAW and cephalometric parameters.

Three-dimensional tomographic assessment of the upper airway using 2 different imaging software programs: A comparison study.

Introduction: Several imaging software programs with different tools are available for upper airway (UAW) analysis by means of cone beam computed tomography. Because of this wide variability, this study aimed to compare the reproducibility of two of the most used software programs on UAW segmentation, that is, Dolphin Imaging (Dolphin Imaging and Management Solutions, Chatsworth, Calif) and Mimics Research (Materialise, Leuven, Belgium).

Methods: The sample consisted of 50 scans of adult subjects with Class III malocclusion; pharyngeal volume and minimal cross-sectional area (mCSA) were assessed twice by 2 experienced evaluators using both software programs.

Diabetes mellitus and drug abuse during pregnancy and the risk for orofacial clefts and related abnormalities.

Objective: to assessed the prevalence of diabetes mellitus (DM) and drug abuse in mothers of children with orofacial clefts (OFC).

Methods: 325 women who had children (0-3y) with clefts were interviewed. Data regarding type of diabetes, use of legal/illegal drugs during pregnancy, waist girth and fasting blood sugar at the first prenatal consult were collected.

Microtensile bond strength of etch-and-rinse and self-etch adhesives to artificially created carious dentin.

This article evaluates a pH-cycling model for simulation of caries-affected and caries-infected dentin (CAD and CID, respectively) surfaces, by comparing the bond strength of an etch-and-rinse and a self-etch adhesive system. For both adhesives, bonding to sound dentin (SD) showed that the microtensile bond strength (μTBS) values of SD, CAD, and CID were SD > CAD > CID (P < 0.05).

Effect of finishing instrumentation on the marginal integrity of resin-based composite restorations.

Purpose: This study evaluated the effect of the use of different finishing instruments on the marginal integrity of resin composite restorations.

Materials And Methods: Bovine incisors (N = 75) embedded in epoxy resin had the facial enamel ground and polished to 1200-grit. A standardized cavity (3 x 3 mm, 2 mm deep) was prepared on each specimen and restored with a 2-step total-etch adhesive (Single Bond, 3M ESPE, St.

Clinical evaluation of desensitizing treatments for cervical dentin hypersensitivity.

The aim of this study was to compare different treatments for dentin hypersensitivity in a 6-month follow-up. One hundred and one teeth exhibiting non carious cervical lesions were selected. The assessment method used to quantify sensitivity was the cold air syringe, recorded by the visual analogue scale (VAS), prior to treatment (baseline), immediately after topical treatment, after 1 week, 1, 3 and 6 months.

Effect of long-term water storage on etch-and-rinse and self-etching resin-dentin bond strengths.

This study sought to evaluate the long-term bond strength of etch-and-rinse and self-etch adhesive systems to dentin after one year of water storage. Crown fragments from the buccal surface of extracted bovine incisors were ground flat to expose dentin surfaces. Four etch-and-rinse and two self-etch bonding agents were used according to manufacturers' instructions.

Influence of different exposure time required to stabilize hardness values of composite resin restorations.

Aim: The purpose of this study was to evaluate if Knoop hardness values (KHN) for top and bottom surfaces of resin composite materials can reach a plateau within a clinically acceptable photoactivation time.

Methods And Materials: Four light-curing units (LCUs) were evaluated in this study (n=5): QTH (Optilux501: 550 mW/cm2) and LEDs (FreeLight2: 1100 mW/cm2; UltraLume5: 900 mW/cm2; and Radii: 750 mW/cm2). Composite resin discs (4 mm x 2 mm) of Heliomolar (Ivoclar/Vivadent) and Herculite XRV (Kerr) were tested using five photoactivation times (20, 40, 60, 80, and 100 seconds).

Dentin and enamel bond strengths of dual-cure composite luting agents used with dual-cure dental adhesives.

Objective: The purpose of this in vitro study was to evaluate and compare dentin and enamel bond strengths obtained with dual-cure composite luting agents when used with dual-cure dental adhesives.

Methods: Human molars were ground flat to expose enamel (n=80) or dentin (n=80). Specimens in each substrate group were randomly assigned to eight treatment sub-groups, according to four adhesive-luting agent combinations and two test conditions (with or without thermocycling).

In vitro microTBS of one-bottle adhesive systems: sound versus artificially-created caries-affected dentin.

This in vitro study aimed to evaluate a pH-cycling model for simulation of caries-affected dentin (CAD) surfaces, by comparing the bond strength of etch-and-rinse adhesive systems on sound and artificially-created CAD. Dentin substrates with different mineral contents and morphological patterns were created by submitting buccal bovine dentin to the following treatments: (1) immersion in artificial saliva during the experimental period (sound dentin, SD), or (2) induction to a CAD condition by means of a dynamic pH-cycling model (8 cycles, demineralization for 3 h followed by mineralization for 45 h). The bond strength of Excite or Prime and Bond NT adhesive systems was assessed using the microtensile bond strength (microTBS) test.

Using extracted teeth for research: the effect of storage medium and sterilization on dentin bond strengths.

Background: The Centers for Disease Control and Prevention has adopted guidelines for infection control of extracted teeth used for research and teaching, requiring that teeth be sterilized before use. The authors conducted a study to test the null hypothesis that the storage medium and sterilization method have no effect on composite-to-dentin bond strengths.

Materials And Methods: The authors collected 170 bovine incisors, cleaned them and placed them randomly into one of six storage media at 37 degrees C for 60 days: distilled water (dH(2)O), 0.

Effect of light curing units on marginal adaptation and hardness of Class II composite resin restorations.

Aims: The aim of this study was to test the influence of different curing protocols on dentin marginal adaptation and the hardness of two composites.

Methods And Materials: Three light-curing-units (LCUs): Quartz-Tungsten-Halogen (QTH: 541 mW/cm2), Argon-Ion-Laser (AL: 277 mW/cm2), and Plasma-Arc-Curing (PAC: 1818 mW/cm2) and two composites FiltekZ250 (F) and Tetric Ceram HB (TC) were tested. Sixty standardized "vertical-slot-Class II-cavities" were prepared at the mesial surface of bovine incisors and divided into six groups (n=10).

Effect of photoactivation systems and resin composites on the microleakage of esthetic restorations.

Aim: The aim of this study was to evaluate the influence of four photoactivation systems [quartz tungsten halogen (QTH), light-emitting diode (LED), argon ion laser (AL), and plasma arc curing PAC)] on cementum/dentin and enamel microleakage of Class II restorations using a microhybrid [Z250-3M ESPE] and two packable composites [(SureFil-Dentsply and Tetric Ceram HB-Ivoclair/Vivadent].

Methods And Materials: Three hundred sixty "vertical-slot Class II cavities" were prepared at the mesial surface of bovine incisors using a 245 carbide bur in a highspeed handpiece. Specimens were divided into twelve groups (composite-photoactivation systems).

2-year Clinical evaluation of sodium hypochlorite treatment in the restoration of non-carious cervical lesions: a pilot study.

This pilot study evaluated the effect of removing acid-etch-exposed dentin collagen on the clinical performance of composite restorations of noncarious cervical lesions placed using 2 different adhesive systems. Fifty-six restorations were placed in 14 subjects, each subject receiving at least 4 restorations. No cavity preparation or mechanical retention form was used.

Influence of thermal and mechanical load cycling on microtensile bond strengths of total and self-etching adhesive systems.

This study evaluated the influence of different thermal (TC) and mechanical (MC) cycling protocols on microtensile bond strength (muTBS) to cervical dentin margins of Class II restorations using two total-etch (TE) adhesives and one self-etching (SE) primer. Class II slot cavities were prepared on the mesial surfaces of 168 bovine incisors and were divided into three groups according to the bonding system used: Single Bond, OptiBond Solo Plus and Clearfil SE Bond. All cavities were restored with Filtek Z250 composite.

Microtensile bond strengths of composite to dentin treated with desensitizer products.

Purpose: This study was designed to analyze the influence of desensitizing procedures on dentin bond strength.

Materials And Methods: Forty bovine incisors were used, divided into four groups (n = 10): G1: control; G2: Gluma Desensitizer (Heraeus Kulzer); G3: Oxa-Gel (Art-Dent); G4: low-intensity laser (MMOptics). The buccal surface was wet ground flat with 180-, 400- and 600-grit silicon carbide abrasive paper to expose midcoronal dentin and create a uniform surface.

Influence of different tests used to measure the bond strength to dentin of two adhesive systems.

Purpose: To investigate the behavior of two bonding systems: self-etching primer Clearfil Liner Bond 2V (CLB) and total-etch Single Bond (SB) when submitted to two bond strength tests: shear bond strength (SBS) and microtensile (MTBS).

Methods: Flat dentin surfaces were obtained at the facial surface of extracted bovine incisors. muTBS started with adhesive application and incremental resin composite insertion.

The effect of light-curing source and mode on microtensile bond strength to bovine dentin.

Purpose: The purpose of this study was to evaluate the effects of different light-curing techniques on the microtensile bond strength of hybrid and packable resin composite to dentin. The null hypotheses were that different light-curing techniques do not affect the adhesion of resin composites to tooth structure and that different resin composites do not have a similar bond to dentin.

Materials And Methods: One hundred four box-shaped buccal preparations were made and dentin/enamel adhesive was applied according to the manufacturer's instructions (Single Bond 3M ESPE).

Effect of whitening dentifrices on the superficial roughness of esthetic restorative materials.

Purpose: The purpose of this study was to investigate the surface roughness (Ra) of different esthetic restorative materials following simulated toothbrushing using different whitening dentifrices.

Materials And Methods: Cylinders of Esthet-X (Dentsply Caulk, Milford, DE, USA), Durafil VS (Heraeus Kulzer, Wehrheim, Germany), and Vitremer (3M ESPE, St. Paul, MN, USA) were made using molds (4 mm in diameter for 2 mm in height).

Photosensitization of in vitro biofilms by toluidine blue O combined with a light-emitting diode.

In natural ecosystems, micro-organisms grow preferentially attached to surfaces, forming matrix-enclosed biofilms. The aim of this study was to determine photodestruction levels in biofilms after subjecting them to photodynamic therapy. Biofilms of Streptococcus mutans, S.

The effect of composite type on microhardness when using quartz-tungsten-halogen (QTH) or LED lights.

This study evaluates the Knoop microhardness of resin composites cured with different light-emitting diode (LED) based light curing units (LCU) or with a conventional quartz-tungsten-halogen light (QTH). Ten experimental groups with 10 specimens each were used. The specimens were prepared by placing two light-cured resin composites with similar VITA shade A2-microhybrid Filtek Z250/3M ESPE and microfill Durafil VS/Heraeus Kulzer--in a 2.

In vitro evaluation of caries inhibition promoted by self-etching adhesive systems containing antibacterial agents.

This study evaluated the cariostatic effect of antibacterial self-etching adhesive systems, by means of an in vitro bacterial caries model. Seventy-five prepared bovine slabs were randomly divided into groups (n=15): (1) unbonded composite, no carious challenge (UNB-NC); (2) unbonded composite, carious challenge (UNB-C); (3) Clearfil SE Bond, no antibacterial agent (CSE); (4) Protect Bond, containing MDPB and fluoride (PB); and (5) Reactmer Bond, fluoride-releasing (RB). All preparations were restored with Filtek Z-250.

Chemical or microbiological models of secondary caries development around different dental restorative materials.

This study evaluated artificial secondary caries around restorative materials, induced by means of chemical or microbiological models. The following materials were used randomly to restore 130 dental blocks: (1) zinc-oxide eugenol-free temporary filling: Coltosol (Coltène/Whaledent Inc.; n = 30), (2) silver amalgam: Permite C (SDI Limited, n = 20), (3) composite resin: Filtek Z250 (3M ESPE; n = 20), (4) glass-ionomer cement: Fuji II (GC America Inc.

Shear bond strength evaluation of composite resin on enamel and dentin after nonvital bleaching.

Background: Studies have shown that bleaching agents interfere with the adhesion of composite resin placed immediately after bleaching.

Purpose: The aim of this study was to evaluate the shear bond strengths of composite resin after four different durations since the time of nonvital bleaching (1 d and 1, 2, and 3 wk).

Materials And Methods: Two hundred seventy bovine teeth were assigned to nine groups (n = 30) according to the bleach used and the time between bleaching and restoration: group 1--sodium perborate (SP), 1 day after bleaching (AB); group 2--SP, 1 week AB; group 3--SP, 2 weeks AB; group 4--SP, 3 weeks AB; group 5--37% carbamide peroxide (CP), 1 day AB; group 6--CP, 1 week AB; group 7--CP, 2 weeks AB; group 8--CP, 3 weeks AB; group 9--control group (no treatment).

Microleakage study of three adhesive systems.

The purpose of this in vitro study was to evaluate the efficacy of three hydrophilic dentin adhesive systems to reduce class II restoration microleakage. A total of 60 human molar teeth were used in which two box cavities were made on the distal and mesial surfaces, with a cervical margin in dentin. These cavities were randomly divided into 3 groups (n = 40 each), according to adhesive system tested: G1: OptiBond SOLO; G2: Amalgambond Plus; G3: Etch & Prime 3.