Enhancing zT in Organic Thermoelectric Materials through Nanoscale Local Control Crystallization.

Organic thermoelectric materials are promising for wearable heating and cooling devices, as well as near-room-temperature energy generation, due to their nontoxicity, abundance, low cost, and flexibility. However, their primary challenge preventing widespread use is their reduced figure of merit (zT) caused by low electrical conductivity. This study presents a method to enhance the thermoelectric performance of solution-processable organic materials through confined crystallization using the lithographically controlled wetting (LCW) technique.

Effect of moderate hydrostatic pressure on crystallization of palm kernel stearin-sunflower oil model systems.

Lipid crystallization under moderate hydrostatic pressure treatments (200 MPa, 20 °C, 1-24 h) was studied in palm kernel stearin (PS 100%) and its blends with sunflower oil (PS 80, 90 % w/w). Hyperbarically-crystallized samples exhibited significantly higher firmness, elastic modulus and critical stress values as compared to those of the samples crystallized at atmospheric pressure. These data indicate that moderate hydrostatic pressure favored the formation of a higher amount of small palm kernel stearin crystals as compared to those formed at atmospheric pressure.

Polymorphism and orientation control of copper-dicarboxylate metal-organic framework thin films through vapour- and liquid-phase growth.

Precise control over the crystalline phase and crystallographic orientation within thin films of metal-organic frameworks (MOFs) is highly desirable. Here, we report a comparison of the liquid- and vapour-phase film deposition of two copper-dicarboxylate MOFs starting from an oriented metal hydroxide precursor. X-ray diffraction revealed that the vapour- or liquid-phase reaction of the linker with this precursor results in different crystalline phases, morphologies, and orientations.

Assembly of the Intraskeletal Coral Organic Matrix during Calcium Carbonate Formation.

Scleractinia coral skeleton formation occurs by a heterogeneous process of nucleation and growth of aragonite in which intraskeletal soluble organic matrix molecules, usually referred to as SOM, play a key role. Several studies have demonstrated that they influence the shape and polymorphic precipitation of calcium carbonate. However, the structural aspects that occur during the growth of aragonite have received less attention.

Role of the polyphenol content on the structuring behavior of liposoluble gelators in extra virgin olive oil.

The role of polyphenols in affecting the structural and rheological properties of oleogels was investigated. Polyphenols were selectively removed from extra virgin olive oil (EVOO), and the resulting oils at three different polyphenol levels were gelled by using 10% (w/w) of monoglycerides (MG), rice wax (RW), sunflower wax (SW), and a mixture of β-sitosterol/γ-oryzanol (PS). The structural characteristics of oleogels were assessed by visual appearance, rheology, polarized light microscopy, calorimetry, XRD, and FTIR.

Mixed 3D-2D Perovskite Flexible Films for the Direct Detection of 5 MeV Protons.

This study reports on a novel, flexible, proton beam detector based on mixed 3D-2D perovskite films deposited by solution onto thin plastic foils. The 3D-2D mixture allows to obtain micrometer-thick and highly uniform films that constitute the detector's active layer. The devices demonstrate excellent flexibility with stable electric transport properties down to a bending radius of 3.

Disentangling Structural and Electronic Properties in VO Thin Films: A Genuine Nonsymmetry Breaking Mott Transition.

Phase transitions are key in determining and controlling the quantum properties of correlated materials. Here, by using the combination of material synthesis and photoelectron spectroscopy, we demonstrate a genuine Mott transition undressed of any symmetry breaking side effects in the thin films of VO. In particular and in contrast with the bulk VO, we unveil the purely electronic dynamics approaching the metal-insulator transition, disentangled from the structural transformation that is prevented by the residual substrate-induced strain.

Impact of sample misalignment on grazing incidence x-ray diffraction patterns and the resulting unit cell determination.

Grazing incidence x-ray diffraction (GIXD) is a frequently used tool for the crystallographic characterization of thin films in terms of polymorph identification and determination of the crystallographic lattice parameters. Even full structure solutions are possible. To obtain highly accurate diffraction patterns, the thin film sample has to be aligned carefully with the center of the goniometer, which allows a defined incidence of the primary x-ray beam relative to the sample surface.

Highly Stable Thin Films Based on Novel Hybrid 1D (PRSH)PbX Pseudo-Perovskites.

In this study, the structure and morphology, as well as time, ultraviolet radiation, and humidity stability of thin films based on newly developed 1D (PRSH)PbX (X = Br, I) pseudo-perovskite materials, containing 1D chains of face-sharing haloplumbate octahedra, are investigated. All films are strongly crystalline already at room temperature, and annealing does not promote further crystallization or film reorganization. The film microstructure is found to be strongly influenced by the anion type and, to a lesser extent, by the DMF/DMSO solvent volume ratio used during film deposition by spin-coating.

Impact of the Electron Acceptor Nature on the Durability and Nanomorphological Stability of Bulk Heterojunction Active Layers for Organic Solar Cells.

A systematic study is conducted to compare the performances and stability of active layers employing a high performance electron donor (PBDB-T) combined with state-of-the-art fullerene (PC BM), nonfullerene (ITIC), and polymer (N2200) electron acceptors. The impact of the chemical nature of the acceptor on the durability of organic solar cells (OSCs) is elucidated by monitoring their photovoltaic performances under light exposure or dark conditions in the presence of oxygen. PC BM molecules exhibit a higher resistance toward oxidation compared to nonfullerene acceptors.

Controlling oleogel crystallization using ultrasonic standing waves.

Oleogels are lipid-based soft materials composed of large fractions of oil (> 85%) developed as saturated and hydrogenated fat substitutes to reduce cardiovascular diseases caused by obesity. Promising oleogels are unstable during storage, and to improve their stability careful control of the crystalline network is necessary. However, this is unattainable with state-of-the-art technologies.

A novel water-resistant and thermally stable black lead halide perovskite, phenyl viologen lead iodide CHN(PbI).

A novel black organoammonium iodoplumbate semiconductor, namely phenyl viologen lead iodide C22H18N2(PbI3)2 (PhVPI), was successfully synthesized and characterized. This material showed physical and chemical properties suitable for photovoltaic applications. Indeed, low direct allowed band gap energy (Eg = 1.

Synthesis, physico-chemical characterization and structure of the elusive hydroxylammonium lead iodide perovskite NHOHPbI.

The synthesis of hydroxylammonium lead iodide NH3OHPbI3 was accomplished by means of the reaction between water solutions of HI and NH2OH with PbI2 in sulfolane in conjunction with either crystallization by CH2Cl2 vapor diffusion or sulfolane extraction with toluene. The appropriate choice of the solvent was found to be crucial in order to attain the desired material. The synthesized compound was extensively characterized by single crystal and powder X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, FT-IR spectroscopy, 1H-NMR spectroscopy, TG-DTA-QMS EGA (Evolved Gas Analysis), ESI-MS, and CHNS analysis.

β-Carotene degradation kinetics as affected by fat crystal network and solid/liquid ratio.

The aim of this research was to study β-carotene degradation kinetics into lipid systems containing different fat crystal networks in the presence of increasing liquid oil amounts. To this purpose, fat blends containing liquid saturated medium chain triacylglycerols (MCT) with increasing content of saturated monoglycerides (MG), tripalmitin (PPP) and tristearin (SSS) were added with 0.6mg/g β-carotene.

Transfer-printing of active layers to achieve high quality interfaces in sequentially deposited multilayer inverted polymer solar cells fabricated in air.

Polymer solar cells (PSCs) are greatly influenced by both the vertical concentration gradient in the active layer and the quality of the various interfaces. To achieve vertical concentration gradients in inverted PSCs, a sequential deposition approach is necessary. However, a direct approach to sequential deposition by spin-coating results in partial dissolution of the underlying layers which decreases the control over the process and results in not well-defined interfaces.

Structural and viscoelastic characterization of ternary mixtures of sunflower oil, saturated monoglycerides and aqueous phases containing different bases.

The structure at different length scales and the viscoelastic properties of ternary mixtures composed of saturated monoglycerides, sunflower oil and aqueous solutions of weak bases (KHCO, NaHCO, and NHHCO) or strong bases (NaOH and KOH) were investigated. The characteristics of ternary mixtures were studied systematically by using polarized light microscopy, differential scanning calorimetry (DSC), synchrotron X-ray diffraction (XRD) and rheological analysis. Results showed that the base type and concentration greatly affected the structure of the mixtures.

Poly(styrene)/oligo(fluorene)-intercalated fluoromica hybrids: synthesis, characterization and self-assembly.

We report on the intercalation of a cationic fluorescent oligo(fluorene) in between the 2D interlayer region of a fluoromica type silicate. The formation of intercalated structures with different fluorophore contents is observed in powders by synchrotron radiation XRD. Successively, the hybrids are dispersed in poly(styrene) through in situ polymerization.

Enhanced Vertical Concentration Gradient in Rubbed P3HT:PCBM Graded Bilayer Solar Cells.

Graded bilayer solar cells have proven to be at least as efficient as the bulk heterojunctions when it comes to the Poly(3-hexylthiophene) (P3HT) - [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) donor-acceptor system. However, control of the vertical concentration gradient using simple techniques has never been reported. We demonstrate that rubbing the P3HT layer prior to PCBM deposition induces major morphological changes in the active layer.

Evolution and control of oxygen order in a cuprate superconductor.

The disposition of defects in metal oxides is a key attribute exploited for applications from fuel cells and catalysts to superconducting devices and memristors. The most typical defects are mobile excess oxygens and oxygen vacancies, which can be manipulated by a variety of thermal protocols as well as optical and d.c.

Highly emissive nanostructured thin films of organic host-guests for energy conversion.

All-organic nanostructured host-guest systems, based on dyes inserted in the nanochannels of perhydrotriphenylene (PHTP) and deoxycholic acid (DCA), show enhanced fluorescence properties with quantum yields even higher than those of the dyes in solution, thanks to the high concentration of emissive molecules with controlled spatial and geometrical organization that prevents aggregation quenching. Both host molecules crystallize, growing with the long axis oriented along the direction of the nanochannels where the linear-chain dyes are inserted, to yield crystals emitting well-polarized light. For the DCA-based host-guests, homogeneous thin films suitable for several applications are obtained.