Characterisation of Films Based on Exopolysaccharides from Strains Isolated from French Polynesia Marine Environments.

This work assessed the film-forming capacity of exopolysaccharides (EPS) produced by six strains recently isolated from different marine environments in French Polynesia atolls. The films were transparent and resulted in small colour alterations when applied over a coloured surface (Δ below 12.6 in the five different colours tested).

Development of cellulose-based polymeric structures using dual functional ionic liquids.

Carboxylate ionic liquids (ILs) combining benzethonium (BE) and didecyldimethylammonium (DDA) as cations have been explored to be used for the first time as dual functional solvents for microcrystalline cellulose (MCC) dissolution and, subsequently development of polymeric structures. Considering that some ILs can remain in the polymeric structures after phase inversion, these ILs can offer advantages such as antibacterial/antimicrobial response and ability to disrupt H-bonds. In this context, all tested ILs have been able to dissolve MCC up to a concentration of 4% (w/w), resulting in different polymeric structures, such as gel-like or films, depending on the type of IL and the ratio between MCC and IL.

Assessment of the Potential of Using Nanofiltration Polymeric and Ceramic Membranes to Treat Refinery Spent Caustic Effluents.

Spent caustic effluents are very challenging due to their very hazardous nature in terms of toxicity as well as their extreme pH (approximately 12-14). Spent caustic has presented a challenge for wastewater treatment in refineries, due to its composition rich in mercaptans, sulfides and other aromatic compounds. To address such problems, membrane filtration was studied using real effluents from Sines Refinery, in Portugal.

Impact of Ionic Liquid Structure and Loading on Gas Sorption and Permeation for ZIF-8-Based Composites and Mixed Matrix Membranes.

Carbon dioxide (CO) capture has become of great importance for industrial processes due to the adverse environmental effects of gas emissions. Mixed matrix membranes (MMMs) have been studied as an alternative to traditional technologies, especially due to their potential to overcome the practical limitations of conventional polymeric and inorganic membranes. In this work, the effect of using different ionic liquids (ILs) with the stable metal-organic framework (MOF) ZIF-8 was evaluated.

Poly(ethylene glycol) Diacrylate Iongel Membranes Reinforced with Nanoclays for CO Separation.

Despite the fact that iongels are very attractive materials for gas separation membranes, they often show mechanical stability issues mainly due to the high ionic liquid (IL) content (≥60 wt%) needed to achieve high gas separation performances. This work investigates a strategy to improve the mechanical properties of iongel membranes, which consists in the incorporation of montmorillonite (MMT) nanoclay, from 0.2 to 7.

Rendering Banana Plant Residues into a Potentially Commercial Byproduct by Doping Cellulose Films with Phenolic Compounds.

This study seeks to render residues from banana plants into a useful byproduct with possible applications in wound dressings and food packaging. Films based on cellulose extracted from banana plant pseudostem and doped with phenolic compounds extracted from banana plant leaves were developed. The phenolic compounds were extracted using batch solid-liquid and Soxhlet methods, with different drying temperatures and periods of time.

Development of bioactive films based on chitosan and Cynara cardunculus leaves extracts for wound dressings.

The development of natural based, effective and protective wound dressings associated to local treatment applied on chronic wounds, represents a major challenge nowadays. In this work chitosan-based films were prepared with different concentrations of ethanolic ultrasound assisted extracts from Cynara cardunculus leaves (EtPUAE). The physico-chemical film properties revealed that extract incorporation influences the volumetric swelling capacity and mechanical properties of the films, leading to materials with a lower fluid absorption capacity and more fragile.

Chitin-glucan complex - Based biopolymeric structures using biocompatible ionic liquids.

This work explores the novelty of dissolving chitin-glucan complex (CGC), from two fungal strains, Komagataella pastoris (CGC) and Aspergillus niger (CGC) (KiOnutrime-CG™), using biocompatible ionic liquids (ILs). Three cholinium-based ILs were tested, choline acetate, choline propionate and choline hexanoate. Although all tested ILs resulted in the dissolution of the co-polymer at a concentration of 5 % (w/w), distinct polymeric structures, films or gels, were obtained from CGC and CGC, respectively.

Biocatalytic CO Absorption and Structural Studies of Carbonic Anhydrase under Industrially-Relevant Conditions.

The unprecedently high CO levels in the atmosphere evoke the urgent need for development of technologies for mitigation of its emissions. Among the alternatives, the biocatalytic route has been claimed as one of the most promising. In the present work, the carbonic anhydrase from bovine erythrocytes (BCA) was employed as a model enzyme for structural studies in an aqueous phase at alkaline pH, which is typical of large-scale absorption processes under operation.

Preparation and Characterization of Films Based on a Natural P(3HB)/mcl-PHA Blend Obtained through the Co-culture of and in Apple Pulp Waste.

The co-culture of DSM 428 and NRRL B-2504 was performed using apple pulp waste from the fruit processing industry as the sole carbon source to produce poly(3-hydroxybutyrate), P(3HB) and medium-chain length PHA, mcl-PHA, respectively. The polymers accumulated by both strains were extracted from the co-culture's biomass, resulting in a natural blend that was composed of around 48 wt% P(3HB) and 52 wt% mcl-PHA, with an average molecular weight of 4.3 × 10 Da and a polydispersity index of 2.

Influence of Anion Structure on Thermal, Mechanical and CO Solubility Properties of UV-Cross-Linked Poly(ethylene glycol) Diacrylate Iongels.

Iongel-based CO separation membranes were prepared by fast (< 1 min) UV-initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of different ionic liquids (ILs) with the [Cmim] cation and anions such as [TFSI], [FSI], [C(CN)] and [B(CN)]. The four ILs were completely miscible with the non-ionic PEGDA network. Transparent and free-standing iongels containing between 60 and 90 %wt of IL were obtained and characterized by diverse techniques (FTIR, TGA, DSC, DMTA, SEM, CO solubility and pure gas permeability).

Impact on CO₂/N₂ and CO₂/CH₄ Separation Performance Using Cu-BTC with Supported Ionic Liquids-Based Mixed Matrix Membranes.

The efficient separation of gases has industrial, economic, and environmental importance. Here, we report the improvement in gas separation performance of a polyimide-based matrix (Matrimid5218) filled with a Cu-based metal organic framework [MOF, Cu₃(BTC)₂] with two different ionic liquids (ILs) confined within the pores. The chosen ILs are commonly used in gas solubilization, 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF₄]) and 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM][OTf]), and the incorporation of the [EMIM][BF₄]@Cu-BTC and [EMIM][OTf]@Cu-BTC composites in Matrimid5218 proved to be an efficient strategy to improve the permeability and selectivity toward CO₂/N₂ and CO₂/CH₄ mixtures.

Demonstration of the adhesive properties of the medium-chain-length polyhydroxyalkanoate produced by Pseudomonas chlororaphis subsp. aurantiaca from glycerol.

Pseudomonas chlororaphis subsp. aurantiaca (DSM 19603) was grown on crude glycerol from biodiesel production to produce a medium-chain-length polyhydroxyalkanoate (mcl-PHA), composed of 3-hydroxydodecanoate (43 ± 1.8 mol%), 3-hydroxydecanoate (29 ± 3.

The Effect of Microporous Polymeric Support Modification on Surface and Gas Transport Properties of Supported Ionic Liquid Membranes.

Microporous polymers based on anionic macroinitiator and toluene 2,4-diisocyanate were used as a support for 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([emim][Tf₂N]) immobilization. The polymeric support was modified by using silica particles associated in oligomeric media, and the influence of the modifier used on the polymeric structure was studied. The supported ionic liquid membranes (SILMs) were tested for He, N₂, NH₃, H₂S, and CO₂ gas separation and ideal selectivities were calculated.

Supported ionic liquid membranes for removal of dioxins from high-temperature vapor streams.

Dioxins and dioxin-like chemicals are predominantly produced by thermal processes such as incineration and combustion at concentrations in the range of 10-100 ng of I-TEQ/kg (I-TEQ = international toxic equivalents). In this work, a new approach for the removal of dioxins from high-temperature vapor streams using facilitated supported ionic liquid membranes (SILMs) is proposed. The use of ceramic membranes containing specific ionic liquids, with extremely low volatility, for dioxin removal from incineration sources is proposed owing to their stability at very high temperatures.

Proton NMR relaxometry study of Nafion membranes modified with ionic liquid cations.

Proton nuclear magnetic resonance (NMR) relaxometry was used to study the ionic mobility and levels of confinement within Nafion membranes modified by incorporation of selected ionic liquid (IL) cations. These studies were performed aiming at understanding the effect of using different types of ionic liquid cations, and their degree of incorporation, in the values of the spin-lattice relaxation times (T(1)) obtained at different values of frequency and thus detect the influence of confinement level on the ions mobility. The frequency dependence of the proton spin-lattice relaxation rate, R(1) = 1/T(1), for the modified Nafion/IL cation membranes was compared with that obtained for an unmodified Nafion membrane, allowing for distinguishing different contributions of the motions of the molecules depending on the frequency tested.