A Comparative Study on the Wear Performance and High-Temperature Oxidation of Co-Free Cermets and Hardmetals.

The present investigation addresses the mechanical properties, wear behaviour, and high-temperature oxidation of cermets and hardmetals based on either Ti(C,N) or WC and a metal binder based on Fe15Ni or Fe15Ni10Cr. This study also includes a commercial-grade WC-Co for comparative purposes. The production of these materials involved a powder metallurgy and sinter-HIP processing route under identical conditions.

Mechanical Performance of AlCrSiN and AlTiSiN Coatings on Inconel and Steel Substrates after Thermal Treatments.

The objective of this study was to explore the mechanical properties of AlCrSiN and AlTiSiN coatings deposited on Inconel and steel substrates after thermal treatments of 500 °C and 800 °C. Nanoindentation was used to measure the hardness and elastic modulus of the coatings, and microindentation was used for observing the contact damage with Hertzian contact loadings. Microscratch and Mercedes tests were used to evaluate the adhesive strength between coating and substrate with both progressive and static loads, respectively.

Cytotoxicity Assessment of a New Design for a Biodegradable Ureteral Mitomycin Drug-Eluting Stent in Urothelial Carcinoma Cell Culture.

Urothelial tumour of the upper urinary tract is a rare neoplasm, but unfortunately, it has a high recurrence rate. The reduction of these tumour recurrences could be achieved by the intracavitary instillation of adjuvant chemotherapy after nephron-sparing treatment in selected patients, but current instillation methods are ineffective. Therefore, the aim of this in vitro study is to evaluate the cytotoxic capacity of a new instillation technology through a biodegradable ureteral stent/scaffold coated with a silk fibroin matrix for the controlled release of mitomycin C as an anti-cancer drug.

3D-Printed Polymer-Infiltrated Ceramic Network with Antibacterial Biobased Silver Nanoparticles.

This work aimed at the antimicrobial functionalization of 3D-printed polymer-infiltrated biomimetic ceramic networks (PICN). The antimicrobial properties of the polymer-ceramic composites were achieved by coating them with human- and environmentally safe silver nanoparticles trapped in a phenolated lignin matrix (Ag@PL NPs). Lignin was enzymatically phenolated and used as a biobased reducing agent to obtain stable Ag@PL NPs, which were then formulated in a silane (γ-MPS) solution and deposited to the PICN surface.

3D-Printed Polymer-Infiltrated Ceramic Network with Biocompatible Adhesive to Potentiate Dental Implant Applications.

The aim of this work was to prepare and characterize polymer-ceramic composite material for dental applications, which must resist fracture and wear under extreme forces. It must also be compatible with the hostile environment of the oral cavity. The most common restorative and biocompatible copolymer, 2,2-bis(p-(2'-2-hydroxy-3'-methacryloxypropoxy)phenyl)propane and triethyleneglycol dimethacrylate, was combined with 3D-printed yttria-stabilized tetragonal zirconia scaffolds with a 50% infill.

[Dermatofibrosarcoma protuberans in atypical inguinal location: Diagnosis, treatment and follow-up scheme].

Objective: To review dermatofibrosarcoma protuberans (DFSP), which is a soft tissue neoplasm of the skin that can rarely affect the genitals.

Material And Method: We report a case of inguinal DFSP in a 40-year-old male who presented a slow-growing mass adjacent to the spermatic cord.

Results: After extensive surgical resection pathological analysis confirmed the diagnosis of DFSP with resection margins affected, so reoperation with margin exeresis and inguinal orchiectomy was required.

Reproducibility of percutaneous nephrolithotomy in the Galdakao-modified supine Valdivia position.

To demonstrate that percutaneous nephrolithotomy (PCNL) in the Galdakao-modified supine Valdivia position can be safely and effectively reproduced by different surgeons. A multicentre retrospective cross-sectional case study on 317 patients was conducted. The centres enrolled were four hospitals from the Spanish National Health System and provided data for consecutive PCNL from January 2008 to December 2010.

[Quality control in the management of complaints from clients of Specialized Health Care Area 10 in the Madrid community (2000-2005)].

Objective: To analyse the complaints made by users of the National Health System in the University Hospital of Getafe (Madrid, Spain), to characterise trends in complaint rates over time and to appraise the quality control in the management of complaints.

Material And Methods: All complaints made between January 2000 and December 2005 were recorded and the incidence rate and annual percent change were calculated. The relationships between complaints and time were analysed.

Prostate cancer detection is also relevant in low prostate specific antigen ranges.

Objective: To address detection rates and clinical features of the cancers detected with low prostate specific antigen (PSA) levels.

Methods: In the context of a prostate cancer (PCa) screening program 1097 men attended to a new rescreen round. Sextant prostate biopsy was recommended when PSA > or =3 ng/ml.

PSA-use in a Spanish industrial area.

Objectives: To document the extent of prostate-specific antigen (PSA)-testing in the general population at Getafe (Spain) outside our prostate cancer (PC) screening program, and to check its performance in terms of PC detection.

Methods: A total of 5371 PSA-test records (1997-1999) were reviewed and testing rates estimated per 1000 person-years. The extent of patient referral (men referred to our facilities) was calculated adjusting for PSA levels.