Topical formulation containing chitosan-chamomile microparticles in cutaneous wound healing in rats.

The aim of this research was to evaluate the efficacy of a topical formulation containing chitosan-chamomile microparticles in cutaneous healing in rats. Male Wistar rats (n=57) were randomly distributed into three groups: treatment; vehicle; and control. Evaluations were performed on days 2, 7 and 14 after the surgical procedure using skin lesion photography, and histological and biochemical analyses.

Photoprotective effect of solid lipid nanoparticles of rutin against UVB radiation damage on skin biopsies and tissue-engineered skin.

Solid lipid nanoparticles (SLNs) containing rutin were prepared to enhance their photochemopreventive effect on the skin. SLNs were produced by the hot melt microemulsion technique. Two 3D skin models: skin explants and 3D tissue engineering skin were used to evaluate the photochemopreventive effect of topical formulations containing rutin SLNs, against ultraviolet B (UVB) radiation, inducing sunburn cells, caspase-3, cyclobutane pyrimidine dimers, lipid peroxidation, and metalloproteinase formation.

A Chitosan-Coated Chamomile Microparticles Formulation to Prevent Radiodermatitis in Breast: A Double-blinded, Controlled, Randomized, Phase II Clinical Trial.

Purpose: The aim was to evaluate the effect of a topical formulation containing chitosan-coated Chamomilla recutita (L.) rauschert microparticles regarding the incidence, grade, and days for the appearance of radiodermatitis (RD) in women with breast cancer.

Methods: A double-blinded, controlled, randomized, phase II clinical trial developed with women diagnosed with breast cancer who will receive radiation therapy.

Spray-dried bacterial cellulose nanofibers: A new generation of pharmaceutical excipient intended for intestinal drug delivery.

Defibrillation of bacterial cellulose by ultra-refining was efficient to release nanofibers (BCNF) which were spray dried with the matrices formers mannitol (MN), maltodextrin or hydroxypropylmethylcellulose. The best microsystem comprised the association of BCNF and MN, so the selected microparticles were loaded with diclofenac sodium or caffeine. Depending on the proportion of BCNF, the nanofibers collapse promoted by spray drying can occur onto surface or into microparticles core, leading to different release behaviors.

Safety of a formulation containing chitosan microparticles with chamomile: blind controlled clinical trial.

Objective: to evaluate the safety of a topical formulation containing chamomile microparticles coated with chitosan in the skin of healthy participants.

Method: phase I blind, controlled, non-randomized, single-dose clinical trial with control for skin, base formulation, and formulation with microparticles. The variables analyzed were irritation and hydration by the Wilcoxon and Kruskall-Wallis tests.

Preparation of a solid self-microemulsifying drug delivery system by hot-melt extrusion.

Hot-melt extrusion (HME) has gained increasing attention in the pharmaceutical industry; however, its potential in the preparation of solid self-emulsifying drug delivery systems (S-SMEDDS) is still unexplored. This study sought to prepare enteric S-SMEDDS by HME and evaluate the effects of the process and formulation variables on S-SMEDDS properties via Box-Behnken design. Liquid SMEDDS were developed, and carvedilol was used as a class II model drug.

Fluidized Bed Hot-Melt Granulation as a Tool to Improve Curcuminoid Solubility.

Curcumin is the main bioactive component of Curcuma longa L. and has recently aroused growing interest from the scientific community. Unfortunately, the medicinal properties attributed to curcuminoids are impaired by their low oral bioavailability or low solubility in aqueous solutions.

Box-Behnken analysis and storage of spray-dried collagenolytic proteases from Myceliophthora thermophila submerged bioprocess.

Enzymes do not have long-term storage stability in soluble forms, thus drying methods could minimize the loss of enzymatic activity, the spray dryer removes water under high temperatures and little time. The aims of this study were to improve the stability of enzymatic extract from Myceliophthora thermophila for potential applications in industry and to evaluate the best conditions to remove the water by spray drying technique. The parameters were tested according to Box-Behnken and evaluated by analysis of variance (ANOVA), all the parameters measured were found to influence the final enzyme activity and spray drying process yield ranged from 38.

Topical Formulation Containing Beeswax-Based Nanoparticles Improved In Vivo Skin Barrier Function.

Lipid nanoparticles have shown many advantages for treatment/prevention of skin disorders with damaged skin barrier function. Beeswax is a favorable candidate for the development of nanosystems in the cosmetic and dermatological fields because of its advantages for the development of products for topical application. In the present study, beeswax-based nanoparticles (BNs) were prepared using the hot melt microemulsion technique and incorporated to a gel-cream formulation.

Curcumin suppresses inflammatory cytokines and heat shock protein 70 release and improves metabolic parameters during experimental sepsis.

Context: Curcumin has been reported to have anti-inflammatory, antioxidant and hypoglycaemic properties, besides reducing mortality in sepsis.

Objective: This study evaluates the biological activities of a curcumin dispersion formulated by spray-drying in experimental sepsis.

Materials And Methods: Male Wistar rats were subjected to sepsis by caecal ligation and puncture (CLP), controls were sham operated.

Fluidized Bed Hot Melt Granulation with Hydrophilic Materials Improves Enalapril Maleate Stability.

This work aimed at developing enalapril maleate granules in order to improve its stability in solid dosage form. Granules were prepared by hot melt granulation using a fluidized bed apparatus. Gelucire 50/13®, polyethylene glycol 6000 e Poloxamer 407® were studied and compared as binders in 2 × 2 factorial designs where the proportions of enalapril maleate, binders and spray dried lactose were varied.

Ultrasound influence on the solubility of solid dispersions prepared for a poorly soluble drug.

Solid dispersions have been successfully used to enhance the solubility of several poorly water soluble drugs. Solid dispersions are produced by melting hydrophilic carriers and mixing in the poorly water soluble drug. Supersaturation is obtained by quickly cooling the mixture until it solidifies, thereby entrapping the drug.

Comparative study of curcumin and curcumin formulated in a solid dispersion: Evaluation of their antigenotoxic effects.

Curcumin (CMN) is the principal active component derived from the rhizome of Curcuma longa (Curcuma longa L.). It is a liposoluble polyphenolic compound that possesses great therapeutic potential.

Improvement of enalapril maleate chemical stability by high shear melting granulation.

Enalapril maleate is a widely used drug, which is chemically unstable when mixed with excipients resulting in enalaprilat and diketopiperazine as the main degradation products. The preparation of enalapril sodium salt has been used to improve drug stability in solid dosage forms; however, product rejection is observed when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. In this study, granules were prepared by melting granulation using stearic acid or glyceryl monostearate, with a view to developing more stable enalapril maleate solid dosage forms.

Skin penetration and photoprotection of topical formulations containing benzophenone-3 solid lipid microparticles prepared by the solvent-free spray-congealing technique.

Purpose: Solid-lipid microparticles loaded with high amounts of the sunscreen UV filter benzophenone-3 were prepared by spray congealing with the objective of decreasing its skin penetration and evaluate whether the sunscreen's photoprotection were impaired by the microencapsulation process.

Methods: The microparticles were produced using the natural lipids carnauba wax or bees wax and three different concentrations of benzophenone-3 (30, 50 and 70%) using spray congealing technique.

Results: The microparticles presented properties suitable for topical application, such as spherical morphology, high encapsulation efficiency (95.

Impact of cross-linking and drying method on drug delivery performance of casein-pectin microparticles.

Pectin is a heteropolysaccharide which has been investigated for the development of colon-specific drug delivery systems. Polymers have been associated with pectin to reduce its aqueous solubility and improve the performance of drug delivery systems. Pectin-casein interaction is widely known in food research, but it has not been fully considered by pharmaceutical scientists.

Effect of stearic acid on enalapril stability and dissolution from multiparticulate solid dosage forms.

Enalapril maleate (EM) is a widely used anti-hypertensive drug which is unstable when mixed with excipients. Enalaprilate and diketopiperazine (DPK) are the main degradation products of enalapril. The in situ preparation of enalapril sodium salt (NaE) has been used to improve drug stability in dosage forms; however, gas release and product rejection ensue when the chemical reaction for obtaining the sodium salt is not completely finished before packaging.

The effect of homogenization method on the properties of carbamazepine microparticles prepared by spray congealing.

Abstract The aim of this study was to investigate the influence of ultrasound and high-shear mixing on the properties of microparticles obtained by spray congealing. Dispersions containing 10% carbamazepine and 90% carrier Gelucire® 50/13 (w/w) were prepared using magnetic stirring, high-shear mixing, or ultrasound. Each preparation was made using hot-melt mixing spray congealing to obtain the microparticles.

Curcumin reduces cisplatin-induced neurotoxicity in NGF-differentiated PC12 cells.

The potential neuroprotective benefits of curcumin against cisplatin neurotoxicity were investigated. Curcumin is a polyphenol derived from the rhizome of Curcuma longa whose pharmacological effects include antioxidant, anti-inflammatory and anti-cancer properties. Cisplatin is a potent chemotherapeutic drug with activity against a wide variety of tumors, although it has notorious side effects.

Chitosan microparticles for sustaining the topical delivery of minoxidil sulphate.

Given the hypothesis that microparticles can penetrate the skin barrier along the transfollicular route, this work aimed to obtain and characterise chitosan microparticles loaded with minoxidil sulphate (MXS) and to study their ability to sustain the release of the drug, attempting a further application utilising them in a targeted delivery system for the topical treatment of alopecia. Chitosan microparticles, containing different proportions of MXS/polymer, were prepared by spray drying and were characterised by yield, encapsulation efficiency, size and morphology. Microparticles selected for further studies showed high encapsulation efficiency (∼82%), a mean diameter of 3.

Box-Behnken design for the optimization of an enantioselective method for the simultaneous analysis of propranolol and 4-hydroxypropranolol by CE.

An experimental design optimization (Box-Behnken design, BBD) was used to develop a CE method for the simultaneous resolution of propranolol (Prop) and 4-hydroxypropranolol enantiomers and acetaminophen (internal standard). The method was optimized using an uncoated fused silica capillary, carboxymethyl-beta-cyclodextrin (CM-beta-CD) as chiral selector and triethylamine/phosphoric acid buffer in alkaline conditions. A BBD for four factors was selected to observe the effects of buffer electrolyte concentration, pH, CM-beta-CD concentration and voltage on separation responses.

Enantioselective analysis of oxybutynin and N-desethyloxybutynin with application to an in vitro biotransformation study.

An enantioselective method using liquid-phase microextraction (LPME) followed by HPLC analysis was developed for the determination of oxybutynin (OXY) and its major metabolite N-desethyloxybutynin (DEO) in rat liver microsomal fraction. The LPME procedure was optimized using multifactorial experiments. Under the optimal extraction conditions, the mean recoveries were 61 and 55% for (R)-OXY and (S)-OXY, respectively, and 70 and 76% for (R)-DEO and (S)-DEO, respectively.

Fluid bed drying of guarana (Paullinia cupana HBK) extract: effect of process factors on caffeine content.

The aim of this study was to study the convective drying of the hydroalcoholic extracts obtained from powdered guarana seeds in a spouted bed dryer. The influence of process variables, such as the convective airflow rate, extract feed rate, and air inlet temperature, on the quality of the dry extract was determined using the caffeine and moisture content for the process evaluation. The caffeine content in the alcoholic and dried extracts was determined by capillary gas chromatography.