Tuning the local electronic structure of CoV-ZIF through bimetallic synergies as a bifunctional electrocatalyst for overall water splitting.

Co-based bimetallic zeolite imidazolate frameworks (ZIFs) have been shown as promising electrocatalysts for the oxygen evolution reaction, but their electronic structure's influence on the catalytic performance for overall water splitting still needs further investigation. In this study, CoV-ZIF, structured as two-dimensional (2D) nanosheet arrays, are grown on nickel foam using one-step co-precipitation strategy. Owing to the synergistic effects of vanadium (V) and cobalt (Co) reasonably regulating the electronic structure, the synthesized bimetallic ZIFs demonstrate superior catalytic performance, which required the overpotentials of only 227 and 68 mV to achieve a current density of 10 mA cm in 1 M KOH for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively.

Customized Heteronuclear Dual Single-Atom and Cluster Assemblies via D-Band Orchestration for Oxygen Reduction Reaction.

Advanced oxygen reduction reaction (ORR) catalysts, integrating with well-dispersed single atom (SA) and atomic cluster (AC) sites, showcase potential in bolstering catalytic activity. However, the precise structural modulation and in-depth investigation of their catalytic mechanisms pose ongoing challenges. Herein, a proactive cluster lockdown strategy is introduced, relying on the confinement of trinuclear clusters with metal atom exchange in the covalent organic polymers, enabling the targeted synthesis of a series of multicomponent ensembles featuring FeCo (Fe or Co) dual-single-atom (DSA) and atomic cluster (AC) configurations (FeCo-DSA/AC) via thermal pyrolysis.

The Biosynthesis Pattern and Transcriptome Analysis of Oil.

The (soapberry) kernel is rich in oil that has antibacterial, anti-inflammatory, and antioxidant properties, promotes cell proliferation, cell migration, and stimulates skin wound-healing effects. oil has excellent lubricating properties and is a high-quality raw material for biodiesel and premium lubricants, showing great potential in industrial and medical applications. Metabolite and transcriptome analysis revealed patterns of oil accumulation and composition and differentially expressed genes (DEGs) during seed development.

Methodological and Physiological Study during Seed Dormancy Release of .

are reported to exhibit seed dormancy, which impedes its cultivation and widespread adoption. In this study, a comprehensive method was established to overcome seed dormancy by subjecting seeds to scarification in 98% HSO for 10 min, followed by 1000 mg·L GA soaking for 48 h and stratification at 4 °C for 100 days. The seed germination percentage has increased significantly, to a peak of 42.

Elucidation of Geniposide and Crocin Accumulation and Their Biosysnthsis-Related Key Enzymes during Fruit Growth.

fruits are extensively grown worldwide, with a large harvest, and its major medicinal ingredients are geniposide and crocins. Research on their accumulation and biosynthsis-related enzymes is rare. In this study, the accumulation of geniposide and crocin of fruits at different developmental stages were clarified by HPLC.

Superhydrophilic Modification of Polyvinylidene Fluoride Membrane via a Highly Compatible Covalent Organic Framework-COOH/Dopamine-Integrated Hierarchical Assembly Strategy for Oil-Water Separation.

The integration of membranes with additives such as functionalized nanomaterials can be recognized as an effective method to enhance membrane performance. However, to obtain an efficient nanoparticle-decorated membrane, the compatibility of nanomaterials remains a challenge. Hydrophilic carboxylated covalent organic frameworks (COF-COOH) might be expected to avoid the drawbacks of aggregation and easy shedding of inorganic materials caused by the poor interfacial compatibility.

In-situ constructed 2D/2D ZnInS/BiTiO S-scheme heterojunction for degradation of tetracycline: Performance and mechanism insights.

Semiconductor materials dominated photocatalytic technology is one of the most efficient approaches to degrade organic pollutants. However, the limited light absorption range and rapid recombination of photogenerated carriers greatly restrict the application of photocatalysts. Rational design of photocatalysts to achieve high catalytic activity and stability is of great importance.

Hierarchically Nanostructured Solid-State Electrolyte for Flexible Rechargeable Zinc-Air Batteries.

The construction of safe and environmentally-benign solid-state electrolytes (SSEs) with intrinsic hydroxide ion-conduction for flexible zinc-air batteries is highly desirable yet extremely challenging. Herein, hierarchically nanostructured CCNF-PDIL SSEs with reinforced concrete architecture are constructed by nanoconfined polymerization of dual-cation ionic liquid (PDIL, concrete) within a robust three-dimensional porous cationic cellulose nanofiber matrix (CCNF, reinforcing steel), where plenty of penetrating ion-conductive channels are formed and undergo dynamic self-rearrangement under different hydrated levels. The CCNF-PDIL SSEs synchronously exhibit good flexibility, mechanical robustness, superhigh ion conductivity of 286.

Study of Turbulence Promoters in Prolonging Membrane Life.

Nanofiltration membrane technology is an effective method for secondary treated sewage purification. However, membrane fouling, which is inevitable in the membrane-separation process, can reduce membrane performance and shorten membrane life. Installing a turbulence promoter is a promising means of improving the hydraulic conditions inside the membrane chamber.

Porous ZrO encapsulated perovskite composite oxide for organic pollutants removal: Enhanced catalytic efficiency and suppressed metal leaching.

Cobalt-based perovskite material, an effective activator of PMS, is widely employed for wastewater remediation, but still affected by the leakage of the cobalt ions. In this study, a porous core-shell structured perovskite LaFeCoO/SiO core @ZrO shell (LFCS@ZrO) was fabricated and partially etched to enlarge channels to further enhance mass transfer ability. The well-designed core-shell structure can not only restrain metal ion leaching by changing the surface microenvironment but also provide an additional driving force attributed to the enriched concentration gradient, thus enhancing the catalytic oxidation performance.

Microporous framework membranes for precise molecule/ion separations.

Microporous framework membranes such as metal-organic framework (MOF) membranes and covalent organic framework (COF) membranes are constructed by the controlled growth of small building blocks with large porosity and permanent well-defined micropore structures, which can overcome the ubiquitous tradeoff between membrane permeability and selectivity; they hold great promise for the enormous challenging separations in energy and environment fields. Therefore, microporous framework membranes are endowed with great expectations as next-generation membranes, and have evolved into a booming research field. Numerous novel membrane materials, versatile manipulation strategies of membrane structures, and fascinating applications have erupted in the last five years.

Non-precious molybdenum nanospheres as a novel cocatalyst for full-spectrum-driven photocatalytic CO reforming to CH.

Photocatalytic CO reforming is considered to be an effective method for clean, low-cost, and environmentally friendly reduction and conversion of CO into hydrocarbon fuels by utilizing solar energy. However, the low separation efficiency of charge carriers and deficient reactive sites have severely hampered the efficiency of the photocatalytic CO reforming process. Therefore, cocatalysts are usually loaded onto the surface of semiconductor photocatalysts to reduce the recombination of charge carriers and accelerate the rates of surface reactions.

Improving the Visible-Light Photocatalytic Activity of Graphitic Carbon Nitride by Carbon Black Doping.

Hydrogen production by water splitting and the removal of aqueous dyes by using a catalyst and solar energy are an ideal future energy source and useful for environmental protection. Graphitic carbon nitride can be used as the photocatalyst with visible light irradiation. However, it typically suffers from the high recombination of carriers and low electrical conductivity.

Boron Nitride Membranes with a Distinct Nanoconfinement Effect for Efficient Ethylene/Ethane Separation.

A BN membrane with a distinct nanoconfinement effect toward efficient ethylene/ethane separation is presented. The horizontal and inclined self-assembly of 2D BN nanosheets endow the BN membrane with abundant percolating nanochannels, and these nanochannels are further decorated by reactive ionic liquids (RILs) to tailor their sizes as well as to achieve nanoconfinement effect. The noncovalent interactions between RIL and BN nanosheets favor the ordered alignment of the cations and anions of RIL within BN nanochannels, which contributes to a fast and selective ethylene transport.

Novel Protic Ionic Liquid Composite Membranes with Fast and Selective Gas Transport Nanochannels for Ethylene/Ethane Separation.

Protic ionic liquids (PILs) were utilized for the fabrication of composite membranes containing silver salt as the CH transport carrier to perform CH/CH separation for the first time. The intrinsic nanostructures of PILs were adopted to construct fast and selective CH transport nanochannels. The investigation of structure-performance relationships of composite membranes suggested that transport nanochannels (polar domains of PILs) could be tuned by the sizes of cations, which greatly manipulated activity of the carrier and determined the separation performances of membranes.

Thermo-responsive gels based on supramolecular assembly of an amidoamine and citric acid.

In this work, we report the formation of a novel, aqueous-based thermo-responsive, supramolecular gelling system prepared by a convenient and efficient self-assembly of a long-chain amino-amide and citric acid. To determine the viscosity behavior and to gain insights into the gelation mechanism, a complementary combination of techniques, including Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic light scattering (DLS), and sinusoidal oscillatory tests, were used. The supramolecular gelator exhibited remarkably reversible sol-gel transitions induced by temperature at 76 °C.

ZnO-Layered Double Hydroxide@Graphitic Carbon Nitride Composite for Consecutive Adsorption and Photodegradation of Dyes under UV and Visible Lights.

In this work, a ZnO-layered double hydroxide@graphitic carbon nitride composite (ZnO-LDH@C₃N₄) was synthesized via co-precipitation method with solvothermal treatment. The structure and morphology of ZnO-LDH@C₃N₄ composite were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopes/transmission electron microscopes (SEM/TEM), N₂ adsorption/desorption, ultraviolet visible diffuse reflectance spectroscopy (UV-Vis-DRS), photoluminescence spectrometer (PL) and electrochemical impedance spectroscopy (EIS). The adsorption and photocatalytic properties of ZnO-LDH@C₃N₄ composite towards the organic dyes: Orange II sodium salt (OrgII, an anionic azo dye) and methylene blue (MB, a cationic azo dye) were investigated.

Heterogeneous oxidative desulfurization of diesel fuel catalyzed by mesoporous polyoxometallate-based polymeric hybrid.

In this work, the simple preparation of novel polymer supported polyoxometallates (POMs) catalysts has been reported. Soluble task-specific cross-linked poly (ionic liquid) (PIL) was prepared with N,​N-​dimethyl-​dodecyl-​(4-​vinylbenzyl) ammonium chloride and divinylbenzene as co-monomers. The as-prepared cationic PILs were assembled with different commercial POMs to form the interlinked mesoporous catalysts, and the formation mechanism was provided.

Uptake and degradation of Orange II by zinc aluminum layered double oxides.

In this work ZnAl-layered double oxide composites (LDO) were developed to remove organic dyes in wastewater by adsorption and photocatalysis. Various LDO composites were synthesized by adjusting synthetic parameters including the molar ratio of Zn to Al, and calcination temperature. LDO adsorption and photocatalytic properties for decomposition of organic dyes were also investigated.

One-step synthesis of metal@titania core-shell materials for visible-light photocatalysis and catalytic reduction reaction.

Metal@TiO2 composites with a core-shell structure possess multifunctional properties. The demonstrated protocols for synthesizing such materials involve multiple steps, requiring precise control over the particle uniformity of the core and shell thickness, as well as complex surface modification. A simple approach to synthesizing metal@TiO2 hybrid nanostructures remains a great challenge.

Synergistic effects of non-thermal plasma-assisted catalyst and ultrasound on toluene removal.

A wire-mesh catalyst coated by La0.8Sr0.2MnO3 was combined with a dielectric barrier discharge (DBD) reactor for toluene removal at atmospheric pressure.