Effect of printing technology and orientation on the accuracy of three-dimensional printed retainers.

Objectives: To evaluate the impact of printer technology and print orientation on the accuracy of directly printed retainers.

Materials And Methods: Digital retainers were printed with two different printing technologies: digital light processing (DLP) and stereolithography (SLA), using two different orientations: 0° and 90°. After printing, the retainers (n = 40) were scanned using cone-beam computed tomography.

MISMARPE protocol: minimally invasive surgical and miniscrew-assisted rapid palatal expansion.

Objective: The purpose of this article is to present the MISMARPE technique, a new minimally invasive surgical procedure to treat maxillary transverse atresia in adult patients under local anesthesia and on an outpatient basis.

Technique Description: The technique consists of miniscrew-assisted rapid palatal expansion (MARPE) associated with a minimally invasive approach using maxillary osteotomies, latency and activation periods until the desired expansion is achieved. The present MISMARPE technique was performed in 25 consecutive cases with a success rate of 96%, yielding good skeletal outcomes with minimal trauma.

Embryotoxicity and teratogenesis of orthodontic acrylic resin in zebrafish.

Objectives: This study investigated the in vivo embryotoxicity, teratogenic potential, and additional effects of orthodontic acrylic resin as well as its components, utilizing zebrafish as a model organism. The research focused on morphological, cardiac, behavioral, and cognitive evaluations that were performed on embryos and larval-stage animals subjected to chronic exposure.

Materials And Methods: Embryo and larval-stage zebrafish were categorized into five experimental groups, which were further subdivided into five subgroups.

Life cycle phases: Literature review and new classification proposal for application in healthcare.

Introduction: Although uncommon in dentistry, the concept of the life cycle holds great importance for dental professionals in identifying crucial intervention opportunities and determining the optimal timing for treatments and procedures.

Objective: To carry out a review of the literature on life cycle classifications and their distinct phases, evaluating their applicability in healthcare.

Methods: A literature review was performed, searching for articles in PubMed, SciELO, National Health Library (BvB), and Google Scholar databases, as well as relevant books.

Orthodontic Wires: A 12-Year Bibliometric Study.

Aims And Objectives: To perform a bibliometric study to identify and evaluate articles associated with "orthodontic wires" indexed in six databases (PubMed, Embase, Cochrane, Scopus, Lilacs, and Google Scholar) from 2010 to 2022.

Materials And Methods: The search strategy in PubMed combined different medical subject heading terms with free-text words and was adjusted for each selected database. The retrieved documents were original English articles containing the keywords used in the search strategies related to orthodontic wires.

Effects of SARPE and MISMARPE on correction of transverse maxillary deficiency: A preliminary comparative evaluation.

Aim: The present study was designed to compare, on cone-beam computed tomography imaging, the skeletal and dental effects of the SARPE (Surgically assisted rapid palatal expansion) and MISMARPE (Minimally Invasive Surgical and Miniscrew-Assisted Rapid Palatal Expansion) techniques.

Materials And Methods: The sample of adult patients with transverse maxillary deficiency (TMD) was divided into two groups, and scans were obtained preoperatively (T0) and immediately after completion of expansion (T1). The posterior and anterior linear transverse distances of the maxilla and the angulation of the maxillary first molars were evaluated.

Obstructive sleep apnea: a review for the orthodontist.

Introduction: Obstructive sleep apnea (OSA) affects an important part of the population and is characterized by recurrent total or partial obstruction of the upper airway (UA) during sleep, negatively affecting the quality of life of patients in the short and long terms, and constituting an important public health problem for the society. The field of expertise of orthodontists is closely related to the UA, placing them in a strategic position to diagnose air passage failures and intervene when necessary. Orthodontists, as health professionals, must know how to recognize respiratory problems and manage them appropriately, when indicated.

Comparing virtual setup software programs for clear aligner treatment.

Background: The aim of this study was to compare the outcomes of the same amount of tooth movement among four different virtual setup software programs.

Methods: This retrospective study included 32 patients who underwent Invisalign treatment. Patients' initial stereolithography (STL) files were imported to three different software programs (SureSmile Aligner [Dentsply Sirona, Charlotte, NC], Ortho Insight 3D [Motion View software, Chattanooga, TN], and Ortho Analyzer [3Shape, Copenhagen, Denmark]).

Orthodontic pain: c-Fos expression in rat brain nuclei after rapid maxillary expansion.

Background: The aim of this in vivo study was to quantitatively evaluate pain after rapid maxillary expansion (RME) in young rats by analyzing the activation of nociception-related structures, that is, the caudalis, interpolaris, and oralis subnuclei, according to the Fos expression.

Methods: A total of 65 Wistar rats were assigned to three groups: control group (n = 15) with no treatment, positive control group (n = 25), and experimental group (n = 25) with RME. The experimental animals were euthanized at 6, 12, 24, 48, and 72 hours after RME, and the brain was later carefully collected.

The Hyrax appliance with tooth anchorage variations in surgically assisted rapid maxillary expansion: a finite element analysis.

Purpose: It is known that a correct transverse maxillary dimension is a key factor for a stable occlusion, which brings functional and esthetic benefits for the patient. In patients presenting maxillary atresia and the completion of bone growth, a highly recommended option for correction is the surgically assisted rapid maxillary expansion (SARME) associated with the Hyrax appliance. The objective of this study was to evaluate the influence of tooth anchorage variations of the Hyrax appliance in SARME through finite element analysis, evaluating which anchorage option might be associated with more effective orthopedic results with less undesired side effects.

Ion release and surface roughness of silver soldered bands with two different polishing methods: An study.

Objective: To evaluate the surface roughness and ion release of silver-soldered joints by using two polishing methods.

Methods: 174 orthodontic bands with and without silver-soldered joints were evaluated and divided into three groups: two experimental, with different polishing methods (SP1 and SP2), and one control (SS) composed of bands without silver solder. For ionic release, 50 bands of each group were immersed in saline solution and submitted to atomic absorption spectrophotometry to quantify the amount of Fe, Ni, Cr (in all the three groups), Ag, Cu, Cd, and Zn (in the two experimental groups).

Dimensional and morphologic characteristics of unilateral impacted maxillary central incisors.

Introduction: This cross-sectional study aimed to investigate the crown and root characteristics of impacted central incisors compared with spontaneously erupted contralateral incisors and the influence of etiologic and local factors on their dimensions.

Methods: Forty-five patients (22 boys, 23 girls) who underwent orthodontic treatment for unilateral impaction of maxillary central incisors were referred for cone-beam imaging. Dimensions of the impacted and contralateral incisors were assessed using Dolphin 3D software (Dolphin Imaging & Management Solutions, Chatsworth, Calif).

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture.

Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures.

Disinfection of Orthodontic Elastomers and Its Effects on Tensile Strength.

Objective: This study aimed to investigate the effect of different disinfection protocols on the mechanical properties of orthodontic elastomeric ligatures (EL), an important issue to biosafety improvement and infection control, and to avoid cross-contamination.

Methods: A total of 120 EL were randomly divided into 6 experimental groups (n = 20) according to the disinfection method employed: group 1, EL were not immersed in a disinfectant solution (control group); group 2, EL were immersed in 2% glutaraldehyde; group 3, EL were immersed in 70% alcohol solution; group 4, EL were cleaned in an ultrasound washing (UW) machine by immersion in 0.5% enzyme detergent solution; group 5, UW procedure was performed, followed by immersion in 2% glutaraldehyde; Group 6, UW procedure was performed, followed by immersion in 70% alcohol.

Comparison between traditional and alternative biocompatible welding techniques used in orthodontic devices.

Objective: To compare the mechanical strength of joints made by conventional soldering with those made by alternative, more biocompatible, methods (spot, tungsten inert gas [TIG] and laser welding), and to compare the microstructural morphology of wires welded with these techniques.

Design: In vitro, laboratory study.

Methods: Forty stainless-steel wire segments with 0.

Low-level laser therapy (LLLT) improves alveolar bone healing in rats.

The main objective of the present study was to evaluate the effect of low-level laser therapy (LLLT) in enhancing bone healing in irradiated alveolus post-tooth extraction. Sixty male Wistar rats (180 ± 10 g) were used in the present study. The left maxillary first molars were extracted, and the alveolar region was irradiated by diode laser device (GaAlAs) immediately after extraction and for more 3-day daily applications.

A reflection on the role of women in Science, Dentistry and Brazilian Orthodontics.

Introduction: This paper reviews the history of women scientists in the 'Western world', whilst highlighting the persistent socio-structural issues that have led to the hiding and masking of the participation of women in Science. Further, a reflection is made of the situation of Dentistry, specifically in the field of Orthodontics in Brazil. The difference between genders is discussed, with the intention to map the progress of women in management and leadership positions, in both the academic and professional fields.

VEGF and FGF-2 Released In Palatal Suture after Rapid Maxillary Expansion (RME).

Vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (FGF-2) have the ability to increase vascular proliferation and permeability. The aim of this study was to quantify the release of two diffusible angiogenic growth factors (VEGF and FGF-2) after rapid maxillary expansion (RME). Thirty animals were randomly assigned to two groups.

Management of the Vertical Dimension in the Camouflage Treatment of an Adult Skeletal Class III Malocclusion.

Treating skeletal class III malocclusions is one of the biggest challenges in Orthodontics. Given the complexity of these cases, orthognathic surgery is often the best treatment option. However, many patients refuse this treatment due to its risks, morbidity, and costs involved.

Metal ion quantification in the saliva of patients with lingual arch appliances using silver solder, laser, or TIG welding.

Objectives: Quantify metal ion release in the saliva, considering that orthodontic appliances with soldered or welded parts may suffer corrosion and release metal ions into saliva, which can trigger adverse effects, such as hypersensitivity.

Methods: Sixty-four patients were distributed into four groups: G1 (control), G2 (silver-soldered lingual arch), G3 (laser-welded lingual arch), and G4 (TIG-welded lingual arch). Saliva samples were collected at four different points and were analyzed for ion release with ICP-MS.

Cone-beam computed tomography evaluation of bone plate and root length after maxillary expansion using tooth-borne and tooth-tissue-borne banded expanders.

Introduction: The objective of this research was to evaluate the buccal bone plate and root length of maxillary permanent first molars using cone-beam computed tomography after maxillary expansion with different activation protocols.

Methods: Cone-beam computed tomography images of growing patients were obtained from the orthodontic department of Pontifical Catholic University of Rio Grande do Sul in Brazil. The groups were Haas-type 2/4 turns, Haas-type 4/4 turns, hyrax-type 2/4 turns, and hyrax-type with alternate rapid maxillary expansions and constrictions (alt-RAMEC) 4/4 turns a day.

Color changes of esthetic elastomeric ligatures evaluated with the Commission Internationale d'Éclairage color system.

Objective: The aim of this study was to assess and compare color changes in esthetic elastomeric ligatures after 30 days using a spectrophotometer and the Commission Internationale d'Éclairage (CIE) color system.

Materials And Methods: The sample comprised elastomeric ligatures of four color groups ( = 42): blue pearl (BP); colorless; white pearl (WP); and pearl. Four samples from each group were allocated in for quadrants of seven patients in a split-mouth model.

Conventional surgical-orthodontic approach with double-jaw surgery for a patient with a skeletal Class III malocclusion: Stability of results 10 years posttreatment.

This case report presents the treatment of a young man with a skeletal Class III malocclusion. He was treated with a conventional surgical-orthodontic approach in which 2 jaw surgeries were performed. The esthetic facial profile, pleasant smile, appropriate occlusion, and overall good treatment outcome remained stable 10 years after active orthodontic treatment.