Deep learning for asbestos counting.

The PCM (phase contrast microscopy) method for asbestos counting needs special sample treatments, hence it is time consuming and rather expensive. As an alternative, we implemented a deep learning procedure on images directly acquired from the untreated airborne samples using standard Mixed Cellulose Ester (MCE) filters. Several samples with a mix of chrysotile and crocidolite with different concentration loads have been prepared.

A new approach to deposit homogeneous samples of asbestos fibres for toxicological tests .

In this paper we describe the results obtained with a novel method to prepare depositions of asbestos fibres for toxicological tests . The technique is based on a micro-dispenser, working as an inkjet printer, able to deposit micro-sized droplets from a suspension of fibres in a liquid medium; we used here a highly evaporating liquid (ethanol) to reduce the experimental time, however other solvents could be used. Both the amount and spatial distribution of fibres on the substrate can be controlled by adjusting the parameters of the micro-dispenser such as deposition area, deposition time, uniformity and volume of the deposited liquid.

Use of Capillary Aerosol Generator in Continuous Production of Controlled Aerosol for Non-Clinical Studies.

The capillary aerosol generator (CAG) is operated with the principal of thermal liquid evaporation through heating of e-liquid in the initial phase, followed by nucleation and condensation regulated through a mixture of airflow to generate aerosols, such as in an electronic cigarette (EC). The CAG is particularly useful in generating aerosols of large volumes in a continuous manner, for instances such as in vivo inhalation toxicology studies, where usage of ECs is not feasible. The thermal effects of generating aerosol from the CAG are similar in terms of temperature applied in an EC, thus allowing investigators to assess the vapors of e-liquids at scale and reproducibility.

Impact of whole-body versus nose-only inhalation exposure systems on systemic, respiratory, and cardiovascular endpoints in a 2-month cigarette smoke exposure study in the ApoE mouse model.

Cigarette smoking is one major modifiable risk factor in the development and progression of chronic obstructive pulmonary disease and cardiovascular disease. To characterize and compare cigarette smoke (CS)-induced disease endpoints after exposure in either whole-body (WB) or nose-only (NO) exposure systems, we exposed apolipoprotein E-deficient mice to filtered air (Sham) or to the same total particulate matter (TPM) concentration of mainstream smoke from 3R4F reference cigarettes in NO or WB exposure chambers (EC) for 2 months. At matching TPM concentrations, we observed similar concentrations of carbon monoxide, acetaldehyde, and acrolein, but higher concentrations of nicotine and formaldehyde in NOEC than in WBEC.

Use of micro-CT to determine tracheobronchial airway geometries in three strains of mice used in inhalation toxicology as disease models.

Aerosol dosimetry estimates for mouse strains used as models for human disease are not available, primarily because of the lack of tracheobronchial airway morphometry data. By using micro-CT scans of in-situ prepared lung casts, tracheobronchial airway morphometry for four strains of mice were obtained: Balb/c, AJ, C57BL/6, and Apoe . The automated tracheobronchial airway morphometry algorithms for airway length and diameter were successfully verified against previously published manual and automated tracheobronchial airway morphometry data derived from two identical in-situ Balb/c mouse lung casts.

Comparison of experimentally measured and computational fluid dynamic predicted deposition and deposition uniformity of monodisperse solid particles in the Vitrocell® AMES 48 air-liquid-interface in-vitro exposure system.

Accurately determining the delivered dose is critical to understanding biological response due to cell exposure to chemical constituents in aerosols. Deposition efficiency and uniformity of deposition was measured experimentally using monodisperse solid fluorescent particles with mass median aerodynamic diameters (MMAD) of 0.51, 1.

Templated Growth of a Homochiral Thin Film Oxide.

Chiral surfaces are of growing interest for enantioselective adsorption and reactions. While metal surfaces can be prepared with a wide range of chiral surface orientations, chiral oxide surface preparation is more challenging. We demonstrate the chirality of a metal surface can be used to direct the homochiral growth of a thin film chiral oxide.

Mechanical thrombectomy for reperfusion of acute ischemic stroke in a Stroke Unit in Argentina.

Objective: Stroke is an important cause of morbidity and mortality worldwide. Reperfusion therapy with intravenous tissue plasminogen activator (IV-tPA) was first implemented in 1996. More recently, endovascular reperfusion with mechanical thrombectomy (MT) demonstrated a robust beneficial effect, extending the 4.

Assessment of Single-Photon Ionization Mass Spectrometry for Online Monitoring of Aerosol Exposure Experiments.

Chemical and physical characterization of transported evolving aerosols in an system is complex. The challenges include appropriate sampling sensitivity, measurement capabilities, and performing online measurements of constituents in the flowing aerosol during exposure. We assessed the performance of single-photon ionization mass spectrometry in measuring aerosol properties within an aerosol exposure system.

Mineralogical Characterization and Dissolution Experiments in Gamble's Solution of Tremolitic Amphibole from Passo di Caldenno (Sondrio, Italy).

In nature, asbestos is often associated with minerals and other non-asbestiform morphologies thought to be harmless, but not much is known about the potential toxic effects of these phases. Therefore, the characterization of natural assemblages should not be limited to asbestos fibers only. This paper combines a multi-analytical characterization of asbestos from Valmalenco (Italy) with data from dissolution experiments conducted in a simulated interstitial lung fluid (Gamble's solution), and a detailed dimensional study that compares the particle population before and after this interaction.

The Evolving Role of Ultrasound Guided Percutaneous Laser Ablation in Elderly Unresectable Breast Cancer Patients: A Feasibility Pilot Study.

Background And Objectives: Breast-conserving surgery represents the standard of care for the treatment of small breast cancers. However, there is a population of patients who cannot undergo the standard surgical procedures due to several reasons such as age, performance status, or comorbidity. Our aim was to investigate the feasibility and safety of percutaneous US-guided laser ablation for unresectable unifocal breast cancer (BC).

The role of intraoperative stroke volume variation on bleeding during functional endoscopic sinus surgery.

Background: Functional endoscopic sinus surgery (FESS) is a minimally-invasive surgical technique for patients with paranasal sinus pathology. Surgical bleeding reduces operative field visibility and increases the incidence of serious complications. Epinephrine injection into the nasal mucosa and controlled hypotension are used to minimize bleeding.

Pt/Cu single-atom alloys as coke-resistant catalysts for efficient C-H activation.

The recent availability of shale gas has led to a renewed interest in C-H bond activation as the first step towards the synthesis of fuels and fine chemicals. Heterogeneous catalysts based on Ni and Pt can perform this chemistry, but deactivate easily due to coke formation. Cu-based catalysts are not practical due to high C-H activation barriers, but their weaker binding to adsorbates offers resilience to coking.

Impact of molecular subtypes classification concordance between preoperative core needle biopsy and surgical specimen on early breast cancer management: Single-institution experience and review of published literature.

Background: Core needle biopsy (CNB) plays a crucial role as diagnostic tool for breast cancer (BC). The characterization of biomarkers status before surgical treatment is crucial when primary systemic therapy is a therapeutic option. The aim of this analysis was to report concordance between preoperative CNB and surgical specimen (SS) in evaluating biomarkers and molecular subtypes.

Chiral nanoscale pores created during the surface explosion of tartaric acid on Cu(111).

The autocatalytic decomposition of tartaric acid on Cu(111) exhibits unique kinetics, which are linked to a hexagonal surface structure adopted at high coverage. The chirality imposed on the surface by tartaric acid throughout the explosion process is presented, and the hexagonal structure shows promise as a chiral template for enantiospecific surface chemistry.

Tackling CO Poisoning with Single-Atom Alloy Catalysts.

Platinum catalysts are extensively used in the chemical industry and as electrocatalysts in fuel cells. Pt is notorious for its sensitivity to poisoning by strong CO adsorption. Here we demonstrate that the single-atom alloy (SAA) strategy applied to Pt reduces the binding strength of CO while maintaining catalytic performance.

Controlling Hydrogen Activation, Spillover, and Desorption with Pd-Au Single-Atom Alloys.

Key descriptors in hydrogenation catalysis are the nature of the active sites for H2 activation and the adsorption strength of H atoms to the surface. Using atomically resolved model systems of dilute Pd-Au surface alloys and density functional theory calculations, we determine key aspects of H2 activation, diffusion, and desorption. Pd monomers in a Au(111) surface catalyze the dissociative adsorption of H2 at temperatures as low as 85 K, a process previously expected to require contiguous Pd sites.

Atomic-Scale Picture of the Composition, Decay, and Oxidation of Two-Dimensional Radioactive Films.

Two-dimensional radioactive (125)I monolayers are a recent development that combines the fields of radiochemistry and nanoscience. These Au-supported monolayers show great promise for understanding the local interaction of radiation with 2D molecular layers, offer different directions for surface patterning, and enhance the emission of chemically and biologically relevant low-energy electrons. However, the elemental composition of these monolayers is in constant flux due to the nuclear transmutation of (125)I to (125)Te, and their precise composition and stability under ambient conditions has yet to be elucidated.

Selective hydrogenation of 1,3-butadiene on platinum-copper alloys at the single-atom limit.

Platinum is ubiquitous in the production sectors of chemicals and fuels; however, its scarcity in nature and high price will limit future proliferation of platinum-catalysed reactions. One promising approach to conserve platinum involves understanding the smallest number of platinum atoms needed to catalyse a reaction, then designing catalysts with the minimal platinum ensembles. Here we design and test a new generation of platinum-copper nanoparticle catalysts for the selective hydrogenation of 1,3-butadiene,, an industrially important reaction.

Enhancement of low-energy electron emission in 2D radioactive films.

High-energy radiation has been used for decades; however, the role of low-energy electrons created during irradiation has only recently begun to be appreciated. Low-energy electrons are the most important component of radiation damage in biological environments because they have subcellular ranges, interact destructively with chemical bonds, and are the most abundant product of ionizing particles in tissue. However, methods for generating them locally without external stimulation do not exist.

Bite of the cats: relationships between functional integration and mechanical performance as revealed by mandible geometry.

Cat-like carnivorous mammals represent a relatively homogeneous group of species whose morphology appears constrained by exclusive adaptations for meat eating. We present the most comprehensive data set of extant and extinct cat-like species to test for evolutionary transformations in size, shape and mechanical performance, that is, von Mises stress and surface traction, of the mandible. Size and shape were both quantified by means of geometric morphometrics, whereas mechanical performance was assessed applying finite element models to 2D geometry of the mandible.

Self-assembly of isomeric monofunctionalized thiophenes.

Controlling the self-assembly of thiophene-containing molecules and polymers requires a strong fundamental understanding of the relationship between molecular features and structure-directing forces. Here, the effects of ring-substitution position on the two-dimensional self-assembly of monosubstituted thiophenes at the phenyloctane/HOPG interface are studied using scanning tunneling microscopy (STM). The influence of π···π-stacking, hydrogen-bonding, and alkyl-chain interactions are explored computationally.