White diet is not necessary during dental bleaching treatment: A systematic review and network meta-analysis of clinical studies.

Objectives: This systematic review with network meta-analysis (NMA) answered whether a white diet is necessary during dental bleaching and if there was any coloring food impacting more significantly the bleaching potential.

Data Sources: The review followed the PRISMA Extension Statement for NMA. Six electronic databases and gray literature were searched until April 2024.

Influence of daily usage times on patients' compliance during at-home bleaching: a randomized clinical trial.

Unlabelled: The effectiveness of at-home dental bleaching treatments depends on the time that bleaching products are in contact with the teeth surface and, consequently, on the adequate use of associated custom acetate trays.

Objective: This randomized single-blinded trial aimed to analyze if the daily usage time of these products influences the patient's compliance behavior when submitted to monitored at-home dental bleaching. Secondary outcomes were color change and tooth sensitivity.

An 8-year follow-up of resin infiltration on anterior white spot lesions.

White spot lesions (WSLs) are sites of enamel surface and subsurface demineralization that increases tissue porosity and affects the teeth appearance. The resin infiltration technique proved to be a valid alternative to arrest caries lesion progression and to masking a color change in noncavitated WSLs. Thus, this study aims to report a clinical case of anterior WSLs treated with resin infiltration technique with an 8-year follow-up.

Which self-etch acidic composition may result in higher dental bonds at the long-term? A network meta-analysis review of in vitro studies.

Objectives: This review evaluated the effects of the acidic composition of self-etch (SE) adhesives at the long-term bond strengths to dentin and enamel.

Data: The review followed the PRISMA Extension Statement for network meta-analysis. Studies were identified by a systematic search in PubMed, Web of Science, and Scopus databases.

Effect of ultrasonic activation of the adhesive system on dentin tubule penetration and the pushout bond strength of fiber posts.

Statement Of Problem: Whether ultrasonic activation of the adhesive system improves dentin tubule penetration and the bond strength of fiber posts to root dentin is unclear.

Purpose: The purpose of this in vitro study was to evaluate the effect of ultrasonic activation of 2 adhesive systems (etch-and-rinse and self-etch) and 1 glass ionomer cement on the dentin tubule penetration and pushout bond strength of fiber posts to root dentin.

Material And Methods: Sixty maxillary central incisors were endodontically treated and divided into 6 groups (n=10) as per the post cementation strategy: etch-and-rinse, etch-and-rinse and ultrasonic, self-etch, self-etch and ultrasonic, glass ionomer cement, and glass ionomer cement and ultrasonic.

Intratubular penetration of endodontic sealers depends on the fluorophore used for CLSM assessment.

Root canal filling aims at eliminating empty spaces into the root canal system using biologically compatible materials. Three-dimensional root canal obturation must prevent or minimize the reinfection caused by microorganisms' leakage. This study aimed at evaluating whether fluorophore (Rhodamine or Fluo-3) influences the CLSM images of intratubular penetration of four endodontic sealers.

Esthetic recovery of teeth presenting fluorotic enamel stains using enamel microabrasion and home-monitored dental bleaching.

This clinical report describes the enamel microabrasion technique for removing maxillary and mandibular hard fluorotic enamel stains followed by home-monitored home dental bleaching. The removal of fluorotic enamel stains utilized macroabrasion with a water-cooled, fine-tapered 3195 FF diamond bur followed microabrasion with the application of Prema Compound (Premier Dental Products Co, Norristown, PA, USA). Home-monitored dental bleaching was performed 14 days after enamel microabrasion using a 10% carbamide peroxide gel for 2 h/day.

Dental bleaching on teeth submitted to enamel microabrasion 30 years ago-a case report of patients' compliance during bleaching treatment.

Objectives: The present dental bleaching case report describes a new method that precisely quantifies the daily wearing-times of the bleaching product by inserting a microsensor in the acetate custom tray. The bleaching efficacy was also discussed since the patient was previously submitted to enamel microabrasion.

Methods: The patient was submitted to enamel microabrasion in 1987, and bleaching treatment was performed in 2005.

Two-Year Clinical Evaluation of a Nanofilled Etch-and-Rinse and a Self-Etch Adhesive System Containing MDPB and Fluoride in Non-carious Cervical Lesions.

Objectives: The aim of this clinical study was to evaluate the performance of restorations for non-carious cervical lesions performed with a two-step etch-and-rinse or with a two-step self-etch adhesive.

Materials And Methods: The teeth to be restored (15 patients, N = 90 restorations) were randomly assigned into 3 groups (n = 30), according to the adhesive system: group 1 (G1): Peak LC Bond; group 2 (G2): Clearfil Protect Bond; and group 3 (G3): prior selective acid etching of the enamel margins before bonding with Clearfil Protect Bond. The NCCLs were restored with Amelogen Plus composite resin.

Three-Year Clinical Evaluation of Class I Restorations in Posterior Teeth. Effects of Two Adhesive Systems.

This longitudinal study evaluated the clinical performance of 97 direct class I resin composite restorations after 3 years. The restorations were performed using 2 types of adhesive systems: (1) Adper™ Single Bond Plus (SB) (3M ESPE, 3mespe.com), which is a two-step etch-and-rinse system, and (2) Adper Scotchbond™ SE (SE) (3M ESPE), which is a two-step self-etching system.

Clinical Comparison of At-Home and In-Office Dental Bleaching Procedures: A Randomized Trial of a Split-Mouth Design.

The objective of this split-mouth clinical study was to compare a combination of in-office and at-home dental bleaching with at-home bleaching alone. Two applications of in-office bleaching were performed, with one appointment per week, using 38% hydrogen peroxide. At-home bleaching was performed with or without in-office bleaching using 10% carbamide peroxide in a custom-made tray every night for 2 weeks.

Surface effects after a combination of dental bleaching and enamel microabrasion: An in vitro and in situ study.

This study evaluated the effects of combining enamel microabrasion and dental bleaching on the physical properties of enamel, using in vitro and in situ conditions and evaluating surface roughness, enamel microhardness and scanning electron microscopy images. One hundred sound bovine teeth were sectioned and cut into discs and randomly divided into 10 study groups (n=10). The results were submitted to Analysis of Variance (ANOVA) for repeated measures, followed by the Tukey test, with significance at 5%.

Effect of Diamondlike Carbon Coating on Reliability of Implant-Supported Crowns.

Purpose: To evaluate the effect of diamondlike carbon (DLC) coating on abutments and/or abutment screws on the reliability, characteristic strength, and Weibull modulus of implant-supported single crowns.

Materials And Methods: Seventy-two external hexagon implants (Emfills Implant 4 mm diameter, 10 mm length, Emfills) were divided into four groups (n = 18 each), according to the presence or not of a DLC coating in the abutment and/or abutment screw, as follows: abutment without coating, screw without coating (AwcSwc); abutment without coating with coated screw (AwcSC); abutment coated with noncoated screw (ACSwc), and coated abutment with coated screw (ACSC). Abutments and screws were evaluated with scanning electron microscopy.

Platform-Switching for Cemented Versus Screwed Fixed Dental Prostheses: Reliability and Failure Modes: An In Vitro Study.

Purpose: The aim of this study was to evaluate the probability of survival of cemented and screwed three-unit implant-supported fixed dental prostheses (ISFDP) using different implant-abutment horizontal matching configurations (regular vs switching platforms).

Methods: One hundred and sixty-eight implants with internal hexagon connection (4 mm diameter, 10 mm length, Emfils; Colosso Evolution System, Itú, SP, Brazil) were selected for this study according to the horizontal implant-abutment matching configuration (regular or switching) and retention method and divided in four groups (n = 21 per group) as follows: 1) regular platform cemented (IRC); 2) or screw-retained (IRS); 3) switched-platform cemented (ISC); or 4) screw-retained (ISS). Regular and platform-switched abutments (Colosso evolution, 4 mm and 3.

Effect of partially demineralized dentin beneath the hybrid layer on dentin-adhesive interface micromechanics.

Objective: To investigate the presence of non-infiltrated, partially demineralized dentin (PDD) beneath the hybrid layer for self-etch adhesive systems, and its effect on micromechanical behavior of dentin-adhesive interfaces (DAIs). This in-vitro laboratory and computer simulation study hypothesized that the presence of non-infiltrated PDD beneath the hybrid layer does not influence the mechanical behavior of the DAI of self-etch adhesive systems.

Methods: Fifteen sound third molars were restored with composite resin using three adhesive systems: Scotchbond Multipurpose (SBMP), Clearfil SE Bond (CSEB) and Adper Promp L-Pop (APLP).

Effect of long-term storage on nanomechanical and morphological properties of dentin-adhesive interfaces.

Introduction: To evaluate the influence of storage time on the elastic modulus, micromorphology, nanoleakage, and micromechanical behavior of the dentin-adhesive interfaces of five adhesive systems (Scotchbond Multi-Purpose, Clearfil SE Bond, One Up Bond F, Adper Easy One, and Filtek LS Adhesive) after 24h (T0) and 12 months (T1).

Methods: Fifty teeth were restored and distributed according to each adhesive system (n=10). At least four specimens were obtained from each tooth.

Microabrasion in tooth enamel discoloration defects: three cases with long-term follow-ups.

Superficial irregularities and certain intrinsic stains on the dental enamel surfaces can be resolved by enamel microabrasion, however, treatment for such defects need to be confined to the outermost regions of the enamel surface. Dental bleaching and resin-based composite repair are also often useful for certain situations for tooth color corrections. This article presented and discussed the indications and limitations of enamel microabrasion treatment.

Effect of abutment screw surface treatment on reliability of implant-supported crowns.

Purpose: To evaluate and compare the reliability of implant-supported single crowns cemented onto abutments retained with coated (C) or noncoated (NC) screws and onto platform-switched abutments with coated screws.

Materials And Methods: Fifty-four implants (DT Implant 4-mm Standard Platform, Intra-Lock International) were divided into three groups (n = 18 each) as follows: matching-platform abutments secured with noncoated abutment screws (MNC); matching-platform abutments tightened with coated abutment screws (MC); and switched-platform abutments secured with coated abutment screws (SC). Screws were characterized by scanning electron microscopy and x-ray photoelectron spectroscopy (XPS).

Dental bleaching with a 10% hydrogen peroxide product: a six-month clinical observation.

Context: The possibility of bleaching vital teeth with peroxide-based products considerably revolutionized esthetic dentistry.

Aim: The aim of this clinical study was to evaluate tooth color change and dental sensitivity after exposure to preloaded film containing a 10% hydrogen peroxide whitening system (Opalescence Trθswhite Supreme).

Materials And Methods: A total of 13 volunteers, aged 18 to 25 years, participated in this study.

Clinical trial evaluating color change and tooth sensitivity throughout and following in-office bleaching.

The aim of this study was to assess the color alteration and sensitivity of teeth throughout and following in-office bleaching. Twenty-two volunteers participated in this clinical trial of bleaching treatment (35% hydrogen peroxide bleaching gel and placebo) applied on maxillary incisors and canines. According to a split-mouth design, the volunteers' maxillary hemi-arches received either the bleaching or placebo agent, applied four times, at 1-week intervals.

Influence of microthreads and platform switching on stress distribution in bone using angled abutments.

Purpose: To evaluate the stress distribution in peri-implant bone by simulating the effect of an implant with microthreads and platform switching on angled abutments through tridimensional finite element analysis. The postulated hypothesis was that the presence of microthreads and platform switching would reduce the stress concentration in the cortical bone.

Methods: Four mathematical models of a central incisor supported by an implant (5.