Thermal Scanning-Probe Lithography for Broad-Band On-Demand Plasmonic Nanostructures on Transparent Substrates.

Thermal scanning-probe lithography (t-SPL) is a high-resolution nanolithography technique that enables the nanopatterning of thermosensitive materials by means of a heated silicon tip. It does not require alignment markers and gives the possibility to assess the morphology of the sample in a noninvasive way before, during, and after the patterning. In order to exploit t-SPL at its peak performances, the writing process requires applying an electric bias between the scanning hot tip and the sample, thereby restricting its application to conductive, optically opaque, substrates.

Dissipation Mechanisms and Superlubricity in Solid Lubrication by Wet-Transferred Solution-Processed Graphene Flakes: Implications for Micro Electromechanical Devices.

Solution-processed few-layer graphene flakes, dispensed to rotating and sliding contacts via liquid dispersions, are gaining increasing attention as friction modifiers to achieve low friction and wear at technologically relevant interfaces. Vanishing friction states, i.e.

Identification of the seeding mechanism in the spinodal instability of dewetting liquids.

Hypothesis: Spinodal dewetting is one of the basic processes inducing a spontaneous withdrawal of a liquid from a substrate surface. In the accepted theory, thickness fluctuations generated by thermally activated capillary waves are amplified by the competing actions of surface tension and disjoining pressure. Ubiquitous sub-nanometric substrate roughness also produces thickness fluctuations and may play a role analogous but even more efficient in seeding the process.

Sliding Friction and Superlubricity of Colloidal AFM Probes Coated by Tribo-Induced Graphitic Transfer Layers.

Colloidal probe atomic force microscopy (AFM) allows us to explore sliding friction phenomena in graphite contacts of nominal lateral size up to hundreds of nanometers. It is known that contact formation involves tribo-induced material transfer of graphite flakes from the graphitic substrate to the colloidal probe. In this context, sliding states with nearly vanishing friction, i.

Integrating Microstructured Electrospun Scaffolds in an Open Microfluidic System for Studies of Human Patient-Derived Primary Cells.

Recent studies have suggested that microenvironmental stimuli play a significant role in regulating cellular proliferation and migration, as well as in modulating self-renewal and differentiation processes of mammary cells with stem cell (SCs) properties. Recent advances in micro/nanotechnology and biomaterial synthesis/engineering currently enable the fabrication of innovative tissue culture platforms suitable for maintenance and differentiation of SCs Here, we report the design and fabrication of an open microfluidic device (OMD) integrating removable poly(ε-caprolactone) (PCL) based electrospun scaffolds, and we demonstrate that the OMD allows investigation of the behavior of human cells during culture in real time. Electrospun scaffolds with modified surface topography and chemistry can influence attachment, proliferation, and differentiation of mammary SCs and epigenetic mechanisms that maintain luminal cell identity as a function of specific morphological or biochemical cues imparted by tailor-made fiber post-treatments.

Nanofluidic-Based Accumulation of Antigens for Miniaturized Immunoassay.

The continuous advances of Nanofluidics have been stimulating the development of novel nanostructures and strategies to accumulate very diluted analytes, for implementing a new class of high sensitivity miniaturized polymeric sensors. We take advantage of the electrokinetic properties of these structures, which allow accumulating analytes inside asymmetric microfluidic structures to implement miniaturized sensors able to detect diluted solutions down to nearly 1.2 pg/mL.

Increased Flexibility in Lab-on-Chip Design with a Polymer Patchwork Approach.

Nanofluidic structures are often the key element of many lab-on-chips for biomedical and environmental applications. The demand for these devices to be able to perform increasingly complex tasks triggers a request for increasing the performance of the fabrication methods. Soft lithography and poly(dimethylsiloxane) (PDMS) have since long been the basic ingredients for producing low-cost, biocompatible and flexible devices, replicating nanostructured masters.

Mechanical characterisation of multi vs. uni-directional carbon fiber frameworks for dental implant applications.

Objectives: The aim of the present study was to investigate the mechanical characteristics of dental implant frameworks made of unidirectional carbon fiber composite (UF) and to compare them with those provided by multidirectional carbon fiber composite (IF).

Methods: 8 identical UF samples were used. The samples were initially evaluated by optical microscope and SEM then non-destructive and destructive mechanical tests were performed on 4 samples in order to evaluate dynamic, static elastic modulus, wettability and ultimate strength.

The Role of Surfaces in Gas Transport Through Polymer Membranes.

This paper describes a procedure to measure the permeability , diffusivity and rate of adsorption , thus determining the solubility and rate of desorption of He, N, O, CH, and CO on a polydimethylsiloxane (PDMS) membrane. The described procedure is able to determine experimentally all the physical quantities that characterize the gas transport process through a thin rubber polymer membrane. The experiments were carried out at room temperature and at a transmembrane pressure of 1 atm.

Gas permeation through rubbery polymer nano-corrugated membranes.

The purpose of this investigation is to fabricate PDMS membranes with reliable surface roughness in order to reduce the surface resistances and to study its impact on the permeation rate. The permeance of CO through PDMS membranes with rough surfaces at nanoscale is studied and compared with the one of membranes with flat surfaces. At very low thickness, rough membranes have a permeance greater than that of membranes with flat surfaces.

Simultaneous Electro-Optical Tracking for Nanoparticle Recognition and Counting.

We present the first detailed experimental observation and analysis of nanoparticle electrophoresis through a nanochannel obtained with synchronous high-bandwidth electrical and camera recordings. Optically determined particle diffusion coefficients agree with values extracted from fitting electrical transport measurements to distributions from 1D Fokker-Planck diffusion-drift theory. This combined tracking strategy enables optical recognition and electrical characterization of nanoparticles in solution, which can have a broad range of applications in biology and materials science.

Stretching of DNA confined in nanochannels with charged walls.

There is currently a growing interest in control of stretching of DNA inside nanoconfined regions due to the possibility to analyze and manipulate single biomolecules for applications such as DNA mapping and barcoding, which are based on stretching the DNA in a linear fashion. In the present work, we couple Finite Element Methods and Monte Carlo simulations in order to study the conformation of DNA molecules confined in nanofluidic channels with neutral and charged walls. We find that the electrostatic forces become more and more important when lowering the ionic strength of the solution.

Symmetric curvature descriptors for label-free analysis of DNA.

High-resolution microscopy techniques such as electron microscopy, scanning tunnelling microscopy and atomic force microscopy represent well-established, powerful tools for the structural characterization of adsorbed DNA molecules at the nanoscale. Notably, the analysis of DNA contours allows mapping intrinsic curvature and flexibility along the molecular backbone. This is particularly suited to address the impact of the base-pairs sequence on the local conformation of the strands and plays a pivotal role for investigations relating the inherent DNA shape and flexibility to other functional properties.

Selective protein detection with a dsLNA-functionalized nanopore.

In the last years, nanopore technology has been increasingly exploited for biomolecule detection and analysis. Recently, the main focus of the research has moved from the study of nucleic acids to the analysis of proteins and DNA-protein complexes. In this paper, chemically functionalized solid-state nanopore has been used to recognize Nuclear Factor-kappa B proteins (NF-κB), that are involved in several disorders and inflammation processes, so that their identification is of crucial importance for prognostic applications.

Modulating DNA translocation by a controlled deformation of a PDMS nanochannel device.

Several strategies have been developed for the control of DNA translocation in nanopores and nanochannels. However, the possibility to reduce the molecule speed is still challenging for applications in the field of single molecule analysis, such as ultra-rapid sequencing. This paper demonstrates the possibility to alter the DNA translocation process through an elastomeric nanochannel device by dynamically changing its cross section.

Size and functional tuning of solid state nanopores by chemical functionalization.

We demonstrate the possibility of using a simple functionalization procedure, based on an initial vapour-phase silanization, to control the size and functionality of solid state nanopores. The presented results show that, by varying the silanization time, it is possible to modify the efficiency of probe molecule attachment, thus shrinking the pore to the chosen size, while introducing a specific sensing selectivity. The proposed method allows us to tune the nanopore biosensor adapting it to the specific final application, and it can be efficiently applied when the pore initial diameter does not exceed a limit dimension related to the mean free path of the silane molecules at the working pressure.

Label-free, atomic force microscopy-based mapping of DNA intrinsic curvature for the nanoscale comparative analysis of bent duplexes.

We propose a method for the characterization of the local intrinsic curvature of adsorbed DNA molecules. It relies on a novel statistical chain descriptor, namely the ensemble averaged product of curvatures for two nanosized segments, symmetrically placed on the contour of atomic force microscopy imaged chains. We demonstrate by theoretical arguments and experimental investigation of representative samples that the fine mapping of the average product along the molecular backbone generates a characteristic pattern of variation that effectively highlights all pairs of DNA tracts with large intrinsic curvature.

"DNA-Dressed NAnopore" for complementary sequence detection.

Single molecule electrical sensing with nanopores is a rapidly developing field with potential revolutionary effects on bioanalytics and diagnostics. The recent success of this technology is in the simplicity of its working principle, which exploits the conductance modulations induced by the electrophoretic translocation of molecules through a nanometric channel. Initially proposed as fast and powerful tools for molecular stochastic sensing, nanopores find now application in a range of different domains, thanks to the possibility of finely tuning their surface properties, thus introducing artificial binding and recognition sites.

DNA detection with a polymeric nanochannel device.

We present the development and the electrical characterization of a polymeric nanochannel device. Standard microfabrication coupled to Focused Ion Beam (FIB) nanofabrication is used to fabricate a silicon master, which can be then replicated in a polymeric material by soft lithography. Such an elastomeric nanochannel device is used to study DNA translocation events during electrophoresis experiments.

DNA manipulation with elastomeric nanostructures fabricated by soft-moulding of a FIB-patterned stamp.

A Focused Ion Beam (FIB)-patterned silicon mould is used to fabricate elastomeric nanostructures, whose cross-section can be dynamically and reversibly tuned by applying a controlled mechanical stress. Direct-write, based on FIB milling, allows the fabrication of nanostructures with a variety of different geometries, aspect ratio, spacing and distribution offering a higher flexibility compared to other nanopatterning approaches. Moreover, a simple double replication process based on poly(dimethylsiloxane) permits a strong reduction of the fabrication costs that makes this approach well-suited for the production of low cost nanofluidic devices.

Fast three-dimensional nanoscale metrology in dual-beam FIB-SEM instrumentation.

A quantitative surface reconstruction technique has been developed for the geometric characterization of three-dimensional structures by using a combined focused ion beam-scanning electron microscopy (FIB-SEM) instrument. A regular pattern of lines is milled at normal incidence on the sample to be characterized and an image is acquired at a large tilt angle. By analyzing the pattern under the tilted view, a quantitative estimation of surface heights is obtained.

Nanotechnology applications in medicine.

In recent years there has been a rapid increase in nanotechnology applications to medicine in order to prevent and treat diseases in the human body. The established and future applications have the potential to dramatically change medical science. The present paper will give a few examples that could transform common medical procedures.