Microbial communities and their role in enhancing hemp fiber quality through field retting.

The current development of industrial hemp "Cannabis Sativa L." fibers for technical textiles and industrial applications requires high-quality fibers with homogeneous properties. However, several factors have been reported to influence the fibers' intrinsic properties, including a post-harvest process known as retting.

Exploring the potential of biofiltration for mitigating harmful gaseous emissions from small or old landfills: a review.

Landfills are widely employed as the primary means of solid waste disposal. However, this practice generates landfill gas (LFG) which contains methane (CH), a potent greenhouse gas, as well as various volatile organic compounds and volatile inorganic compounds. These emissions from landfills contribute to approximately 25% of the total atmospheric CH, indicating the imperative need to valorize or treat LFG prior to its release into the atmosphere.

Estimating the bias related to DNA recovery from hemp stems for retting microbial community investigation.

The industrial hemp plant Cannabis sativa is a source of vegetable fiber for both textiles and biocomposite applications. After harvesting, the plant stems are laid out on the ground and colonized by microorganisms (bacteria and fungi) naturally present in the soil and on the stems. By producing hydrolytic enzymes that degrade the plant wall polymers, the natural cement that binds the fiber bundles together is removed, thus facilitating their dissociation (retting process) which is required for producing high-performant fibers.

Treatment of gaseous emissions from tire manufacturing industry using lab-scale biofiltration pilot units.

Continuously seeking the improvement of environmental protection, the limitation of exhaust emissions is of significance for the tire manufacturing industry. The aim of this study is to assess the potential of biofiltration for the treatment of such gaseous emissions. This work highlights that biofiltration is able to remove both hydrophilic and hydrophobic compounds within a single pilot unit of biofiltration.

Evolution of temporal dynamic of volatile organic compounds (VOCs) and odors of hemp stem during field retting.

New non-destructive approach to evaluate the retting process was investigated. Increase of retting duration led to a decrease of VOCs emitted by plants and change of color and plant odor. The variation of VOCs and odor could be used as indicators for the degree of retting.

Investigation of Removal Capacities of Biofilters for Airborne Viable Micro-Organisms.

New emerging issues appears regarding the possible aerosolization of micro-organisms from biofilters to the ambient air. Traditional bioaerosol sampling and cultural methods used in literature offer relative efficiencies. In this study, a new method revolving around a particle counter capable of detecting total and viable particles in real time was used.

Management of Microbial Communities through Transient Disturbances Enhances the Functional Resilience of Nitrifying Gas-Biofilters to Future Disturbances.

Microbial communities have a key role for the performance of engineered ecosystems such as waste gas biofilters. Maintaining constant performance despite fluctuating environmental conditions is of prime interest, but it is highly challenging because the mechanisms that drive the response of microbial communities to disturbances still have to be disentangled. Here we demonstrate that the bioprocess performance and stability can be improved and reinforced in the face of disturbances, through a rationally predefined strategy of microbial resource management (MRM).

Potentialities of coupling biological processes (biotrickler/biofilter) for the degradation of a mixture of sulphur compounds.

This study deals with the potential of biological processes combining a biotrickler and a biofilter to treat a mixture of sulphur-reduced compounds including dimethyl sulphide (DMS), dimethyl disulphide (DMDS) and hydrogen sulphide (H2S). As a reference, duplicated biofilters were implemented, and operating conditions were similar for all bioprocesses. The first step of this work was to determine the efficiency removal level achieved for each compound of the mixture and in a second step, to assess the longitudinal distribution of biodegradation activities and evaluate the total bacteria, Hyphomicrobium sp.

One-stage biotrickling filter for the removal of a mixture of volatile pollutants from air: performance and microbial community analysis.

The biodegradation of gas-phase mixtures of methanol, α-pinene and H2S was examined in a biotrickling filter (BTF), inoculated with a microbial consortium composed of an autotrophic H2S-degrading culture, and pure strains of Candida boidinii, Rhodococcus erythropolis, and Ophiostoma stenoceras. The inlet concentrations of methanol, α-pinene and H2S varied from 0.05 to 3.

Resistance and resilience of removal efficiency and bacterial community structure of gas biofilters exposed to repeated shock loads.

Since full-scale biofilters are often operated under fluctuating conditions, it is critical to understand their response to transient states. Four pilot-scale biofilters treating a composting gas mixture and undergoing repeated substrate pulses of increasing intensity were studied. A systematic approach was proposed to quantify the resistance and resilience capacity of their removal efficiency, which enabled to distinguish between recalcitrant (ammonia, DMDS, ketones) and easily degradable (esters and aldehyde) compounds.

Bacterial dynamics in steady-state biofilters: beyond functional stability.

The spatial and temporal dynamics of microbial community structure and function were surveyed in duplicated woodchip-biofilters operated under constant conditions for 231 days. The contaminated gaseous stream for treatment was representative of composting emissions, included ammonia, dimethyl disulfide and a mixture of five oxygenated volatile organic compounds. The community structure and diversity were investigated by denaturing gradient gel electrophoresis on 16S rRNA gene fragments.

Integrating microbial ecology in bioprocess understanding: the case of gas biofiltration.

Biofilters are packed-bed bioreactors where contaminants, once transferred from the gas phase to the biofilm, are oxidized by diverse and complex communities of attached microorganisms. Over the last decade, more and more studies aimed at opening the back box of biofiltration by unraveling the biodiversity-ecosystem function relationship. In this review, we report the insights provided by the microbial ecology approach in biofilters and we emphasize the parallels existing with other engineered ecosystems used for wastewater treatment, as they all constitute relevant model ecosystems to explore ecological issues.

Investigation of the acclimatization period: example of the microbial aerobic degradation of volatile organic compounds (VOCs).

The aim of this study is to better evaluate the occurrence of an acclimatization-enrichment period, defined as a selection period of consortia having the capability to biodegrade pollutants. In order to perform this evaluation, two experimental strategies were carried out and the results were studied carefully. Two laboratory-scale reactors were inoculated with activated sludge from an urban treatment plant.

Assessing the bias linked to DNA recovery from biofiltration woodchips for microbial community investigation by fingerprinting.

In this study, we explored methodological aspects of nucleic acid recovery from microbial communities involved in a gas biofilter filled with pine bark woodchips. DNA was recovered indirectly in two steps, comparing different methods: cell dispersion (crushing, shaking, and sonication) and DNA extraction (three commercial kits and a laboratory protocol). The objectives were (a) to optimize cell desorption from the packing material and (b) to compare the 12 combinations of desorption and extraction methods, according to three relevant criteria: DNA yield, DNA purity, and community structure representation by denaturing gradient gel electrophoresis (DGGE).

Absorption of a mixture of volatile organic compounds (VOCs) in aqueous solutions of soluble cutting oil.

A semi-industrial bioscrubber was developed to treat a complex mixture of VOCs: oxygenated, aromatic and chlorinated compounds. In order to optimize the VOCs mass transfer, an original washing agent made up of water and cutting oil was tested, and the impact of this washing agent on bioscrubbing performances was investigated. The results obtained with a laboratory unit show that the addition of oil strongly increases the quantity of transferred aromatics.

Biofiltration of volatile organic compounds.

The removal of volatile organic compounds (VOCs) from contaminated airstreams has become a major air pollution concern. Improvement of the biofiltration process commonly used for the removal of odorous compounds has led to a better control of key parameters, enabling the application of biofiltration to be extended also to the removal of VOCs. Moreover, biofiltration, which is based on the ability of micro-organisms to degrade a large variety of compounds, proves to be economical and environmentally viable.

Evaluation of dispersion methods for enumeration of microorganisms from peat and activated carbon biofilters treating volatile organic compounds.

To enumerate microorganisms having colonized biofilters treating volatile organic compounds, it is necessary firstly to evaluate dispersion methods. Crushing, shaking and sonication were then tested for the removal of microflora from biofilters packing materials (peat and activated carbon). Continuous or discontinuous procedures, and addition of glass beads had no effect on the number of microorganisms removed from peat particles.

Biological treatment process of air loaded with an ammonia and hydrogen sulfide mixture.

The physico-chemical characteristics of granulated sludge lead us to develop its use as a packing material in air biofiltration. Then, the aim of this study is to investigate the potential of unit systems packed with this support in terms of ammonia and hydrogen sulfide emissions treatment. Two laboratory scale pilot biofilters were used.