Clinical characteristics, management, and malignancy rate of oral lichen planus: a European multicenter study.

Introduction: Oral lichen planus (OLP) is a chronic inflammatory mucocutaneous condition that includes a spectrum of oral clinical manifestations ranging from mild painless white lesions to painful erosions and ulcers. The purpose of this European multicenter study is to describe the general characteristics of OLP lesions, the clinical and histopathological diagnosis, and the management of OLP at different European Oral Medicine and Maxillofacial Surgery centers, in order to minimize selections biases and provide information about the current trends in the treatment of OLP across Europe.

Materials And Methods: Data and histopathological records of patients with OLP were retrospectives revised and only those patients that fulfilled the diagnostic criteria from the 2016 position paper by American Academy of Oral and Maxillofacial Pathology were included.

Effectiveness of immune checkpoint inhibitors in the treatment of kidney cancer oral metastasis. A case report.

Oral cavity metastasis from renal cell carcinoma is rare with poor prognosis. Recently immune checkpoint inhibitors (ICIs) have shown promising outcomes in the treatment of advanced RCC. Herein, we report a case of palatal lesion mimicking vascular tumor in a 60-year-old woman with locally advanced kidney cancer (T3aN0M0).

Assessment of a New Medical Device (Pirifix) for Positioning and Maintaining the Upper Dental Arch during Le Fort I Osteotomy.

Introduction: Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding, others only positioning. This study aimed to assess the accuracy of a new MD (Pirifix) coupling these two functions during LFIO on 3D-printed models.

An innovative 3D hydroxyapatite patient-specific implant for maxillofacial bone reconstruction: A case series of 13 patients.

The study aimed to evaluate and discuss the use of an innovative PSI made of porous hydroxyapatite, with interconnected porosity promoting osteointegration, called MyBone Custom® implant (MBCI), for maxillofacial bone reconstruction. A multicentric cohort of 13 patients underwent maxillofacial bone reconstruction surgery using MBCIs for various applications, from genioplasty to orbital floor reconstruction, including zygomatic and mandibular bone reconstruction, both for segmental defects and bone augmentation. The mean follow-up period was 9 months (1-22 months).

Are 3D-printed anatomical models of the ear effective for teaching anatomy? A comparative pilot study versus cadaveric models.

Purpose: Despite the combination of chalkboard lectures and cadaveric models, the ear remains a complex anatomical structure that is difficult for medical students to grasp. The aim of this study was to evaluate the contribution of a 3D-printed ear model for educating undergraduate medical students by comparing it with a conventional cadaveric model.

Methods: Models of the ear comprising the outer ear, tympanic membrane, ossicles and inner ear were modeled and then 3D-printed at 6:1 and 10:1 scales based on cadaveric dissection and CT, cone-beam CT and micro/nano CT scans.

Persistent myogenic temporomandibular disorders: Are navigation-guided botulinum toxin-A injections into the lateral pterygoid muscles effective?

Background: Botulinum toxin has proven effective in treating persistent myogenous temporomandibular disorders (M-TMDs) unresponsive to conservative therapies. While the usual injection sites are the masseter and temporalis muscles, the deeper lateral pterygoid muscle (LPM) is often overlooked due to its difficulty of access and the risk of local complications. This study aims to evaluate the effectiveness of botulinum toxin-A injections (BTX-A) in the LPM with MR-guided navigation of patients with persistent M-TMDs.

3D printing as a pedagogical tool for teaching normal human anatomy: a systematic review.

Background: Three-dimensional-printed anatomical models (3DPAMs) appear to be a relevant tool due to their educational value and their feasibility. The objectives of this review were to describe and analyse the methods utilised for creating 3DPAMs used in teaching human anatomy and for evaluating its pedagogical contribution.

Methods: An electronic search was conducted on PubMed using the following terms: education, school, learning, teaching, learn, teach, educational, three-dimensional, 3D, 3-dimensional, printing, printed, print, anatomy, anatomical, anatomically, and anatomic.

Hybrid workflow for custom-made medical devices: A case report about nasal reconstruction.

Specialist industries usually develop custom-made medical devices outside a medical structure at the request of a healthcare professional. Access to 3D-printing technology with dedicated softwares in hospitals allow surgeons to perform virtual surgery leading to safer and more precise surgery. The authors present the hybrid workflow that combined the skills of surgeons, engineers and manufacturers to create titanium custom-made cutting guide and implants to reconstruct the nasal bone after the resection of an intraosseous hemangioma.

Reporting Criteria for Clinical Trials on Medication-Related Osteonecrosis of the Jaw (MRONJ): A Review and Recommendations.

Medication-related osteonecrosis of the jaw (MRONJ) is a complication caused by anti-resorptive agents and anti-angiogenesis drugs. Since we wanted to write a protocol for a randomized clinical trial (RCT), we reviewed the literature for the essential information needed to estimate the size of the active patient population and measure the effects of therapeutics. At the same time, we designed a questionnaire intended for clinicians to collect detailed information about their practices.

Questions about Residual Cell Viability in Cryopreserved Human Amniotic Membrane and Its Impact on Clinical Applications.

We questioned the relevance of evaluating residual cell viability in human amniotic membrane (hAM) after its cryopreservation since cell survival is controversial and its ability to act as a matrix (including the presence of growth factors and cytokines) appears to be most important for tissue regeneration purposes. We also discussed the usefulness of osteodifferentiating amniotic cells in whole hAM for bone repair applications. We have evidence that determining residual cell viability after cryopreservation and hAM osteodifferentiation is not justified.

Does Penicillin Allergy Increase the Risk of Surgical Site Infection after Orthognathic Surgery? A Multivariate Analysis.

This study aimed to demonstrate an association between the occurrence of surgical site infection (SSI) after orthognathic surgery and penicillin allergy and to assess whether other factors could be associated with the occurrence of SSI. A 10-year monocentric retrospective study was conducted to identify possible risk factors for SSI in orthognathic surgery. Bivariate analyses were performed using Fisher, Student, or Wilcoxon tests and multivariate analyses using logistic regression.

[Temporomandibular joint dysfunctions: evolution in patient care].

Temporomandibular joint dysfunctions are a frequently occurring condition that can have a considerable impact on the quality of life. The treatment modalities vary according to the anatomical involvement and symptomatology of the patient. Conservative and surgical management is still controversial and has evolved significantly in recent decades.

Development of a biomimetic bioreactor for regenerative endodontics research.

In the context of regenerative endodontics research with the development of biomaterials, this work aimed to develop and test a prototype biomimetic bioreactor of a human tooth. The bioreactor was designed to reproduce a shaped dental canal connected with a cavity reproducing the periapical region and irrigated through two fluidic channels intended to reproduce the apical residual vascular supply. A test biomaterial composed of polylactic acid/polycaprolactone-tannic acid (PLA/PCL-TA) was produced by electrospinning/electrospraying and calibrated to be inserted in a dental canal.

The epidemiology and management of odontomas: a European multicenter study.

Introduction: Odontoma is the most commonly diagnosed odontogenic tumor of the oral cavity. The objective of the present study was to assess the demographic variables, patterns, diagnostic features, and management issues of odontomas treated at several European departments of maxillofacial and oral surgery.

Materials And Methods: This study was conducted at 8 European departments of oral surgery between January 1, 2004, and December 31, 2018.

Pre-Interventional 3D-Printing-Assisted Planning of Flow Disrupter Implantation for the Treatment of an Intracranial Aneurysm.

Intrasaccular flow disrupter devices (ISFD) have opened up new ways to treat intracranial aneurysms but choosing the correct size of ISFD can be challenging. We describe the first use of 3D printing to assist in the choice of ISFD, and we report an illustrative case. We developed a technique that uses preoperative angiography to make a plastic model of the aneurysm.

An epidemiologic retrospective study of maxillofacial traumatology in the elderly.

Introduction: The elderly population, which is more active than before, is increasingly suffering from trauma (loss of reflexes and systemic pathologic conditions). Surgical management may be more controversial due to the potential consequences of general anesthesia and the sometimes negligible consequences of functional management. The main objective of this study was to analyze the causes and location of facial fractures in subjects older than 65 years.

Intraoperative cone beam assessment after reduction of zygomatic fractures helps in taking a decision on associated orbital floor fractures.

Introduction: Orbital floor fracture (OFF) are frequently associated with zygomatic fractures (ZF). The reduction of the ZF may modify the features of the associated OFF. Intraoperative cone beam CT (CBCT) has shown diagnostic performance of OFF.

ATMP Environmental Exposure Assessment in European Healthcare Settings: A Systematic Review of the Literature.

Since 2007, a new class of biologic products for human use called "advanced therapy medicinal products (ATMP)" have been legally integrated in the European Medical Agency. They consist of recombinant nucleic acid, engineered cells, cells, or tissues. In the United States, ATMP fall under the regulatory framework of biological products and the term "cell and gene therapy product" is used in the legislative and regulatory documents.

Highly Structured 3D Electrospun Conical Scaffold: A Tool for Dental Pulp Regeneration.

New procedures envisioned for dental pulp regeneration after pulpectomy include cell homing strategy. It involves host endogenous stem cell recruitment and activation. To meet this cell-free approach, we need to design a relevant scaffold to support cell migration from tissues surrounding the dental root canal.