Vitamin E-stabilized polyethylene shows similar survival rates at minimum 7-year follow-up compared to conventional polyethylene in primary total knee arthroplasty.

Purpose: The aim of this cross-sectional study was to compare survival, clinical and radiographic results of total knee arthroplasty (TKA) with vitamin E-stabilized polyethylene (VEPE) or conventional polyethylene (CPE) at a minimum of 7-year follow-up.

Methods: Patients who underwent primary TKA between 2011 and 2015, receiving the same cemented rotating platform knee design with VEPE or CPE tibial inserts, were identified. Patients were contacted for clinical and radiographic follow-up.

Kuntscher nail removal: Revision of a failed hip resurfacing above an incarcerated Kuntscher nail. A case report of a smart nail extraction technique through a custom-made instrumentation.

Removal of a retained and osseointegrated intramedullary femoral nail can represent a considerable problem, especially in the case of contemporary total hip arthroplasty or, even worse, in the case of revision hip arthroplasty. Usually, complex and invasive surgical techniques are required to remove incarcerated Kuntscher nails. We described a case of an incarcerated Kuntscher nail, inserted 39 years before, in a 75-year-old woman waiting for a revision total hip arthroplasty of a failed metal-on-metal hip resurfacing.

Short- to Mid-Term Clinical and Radiological Results of Selective Laser Melting Highly Porous Titanium Cup in Primary Total Hip Arthroplasty.

(1) : The aim of this study was to evaluate short- to mid-term clinical and radiological results in patients undergoing primary total hip arthroplasty (THA) with the use of a Selective Laser Melting 3D-printed highly porous titanium acetabular cup (Jump System Traser, Permedica Orthopaedics). (2) : We conducted a retrospective study and collected prospective data on 125 consecutive patients who underwent primary THA with the use of highly porous titanium cup. Each patient was evaluated preoperatively and postoperatively with a clinical and radiological assessment.

Hip arthrodesis conversion to dual mobility total hip arthroplasty in a young adult using a custom-made highly-porous titanium monobloc cup: A case report.

Introduction: Conversion of hip arthrodesis to total hip arthroplasty (THA) is an effective but challenging procedure to restore hip functionality and improve quality of life. Herein, a case of arthrodesis takedown to a dual mobility THA with a custom-made 3D-printed cup.

Presentation Of Case: Due to higher risk of instability and loosening for the altered and atrophic anatomy, a custom-made highly-porous titanium dual mobility monobloc cup has been used for a cementless conversion THA in 31-year-old patient with hip arthrodesis.

The Effects of Different Femoral Component Materials on Bone and Implant Response in Total Knee Arthroplasty: A Finite Element Analysis.

Due to the high stiffness of the biomaterials used in total knee arthroplasty, stress shielding can lead to decreased periprosthetic bone mineral density and bone resorption. As different materials and 3D-printed highly porous surfaces are available for knee femoral components from the industry nowadays, this study aimed to compare the effects of two same-design cruciate-retaining femoral components, made with CoCr and titanium alloy, respectively, on periprosthetic bone stresses through a finite element model of the implanted knee in order to evaluate the induced stress shielding. Moreover, the effect of the cementless highly porous surface of the titanium implant was analyzed in comparison to the cemented interface of the CoCr implant.

Evolution and New Generation of Dual Mobility Cups.

Although total hip arthroplasty (THA) is considered a successful procedure, hip dislocation remains the main cause of early failure. Dual mobility cups (DMCs) have been shown to significantly reduce the dislocation rate in both primary and revision THAs. During the past several decades, DMCs have evolved in design and fixation interface.

Is Modular Dual Mobility Superior to Standard Bearings for Reducing Dislocation Risk after Primary Total Hip Arthroplasty? A Retrospective Comparative Multicenter Study.

Background: Dual mobility (DM) has been proven to reduce dislocation risk after total hip arthroplasty (THA). In the last decade modular DM (modDM) constructs have been introduced to allow the use of DM articulation with standard cementless acetabular shells. However, clinical evidence of modDM effectiveness is still low in primary THA and concerns about implant-related complications are increasing.

Hip stability parameters with dual mobility, modular dual mobility and fixed bearing in total hip arthroplasty: an analytical evaluation.

Background: Use of dual mobility (DM) in total hip arthroplasty has gained popularity due to the ability to reduce dislocation through increased jumping distance and impingement-free arc of movement. Recently, modular dual mobility (modDM) systems were introduced to give the possibility to use DM with standard metal-backed shells, however few has been studied to date regarding how jumping distance and the center of rotation change with modDM. The objective of this study was to evaluate, through analytical simulation, how jumping distance, center of rotation and arc of movement change between DM and standard cups with modDM or fixed bearings (FB).

"Systematic review and meta-analysis of ceramic coated implants in total knee arthroplasty. Comparable mid-term results to uncoated implants.".

Background: Nitride-based ceramic coatings, such as titanium nitride (TiN) and titanium niobium nitride (TiNbN), have been introduced in total knee arthroplasty (TKA) to enhance the mechanical properties and biocompatibility of knee components, harden the metal surface and reduce CoCrMo exposure and metal ion release. However, the theoretical advantages of these ceramic coatings in TKA have yet to be fully elucidated. This systematic review aimed to provide clinical evidence on mid-term outcomes of ceramic-coated knee prostheses in comparison with uncoated standard CoCrMo knee prostheses in primary TKA.

Use of a Plasma-Sprayed Titanium-Hydroxyapatite Femoral Stem in Hip Arthroplasty in Patients Older than 70 Years. Is Cementless Fixation a Reliable Option in the Elderly?

Background: Although cementless implants are increasing in popularity, the use of cementless femoral stems for total hip arthroplasty (THA) and hip hemiarthroplasty (HH) in elderly patients remains controversial. The aim of this study was to report the outcomes of a cementless stem used in a large multicentric cohort of elderly patients receiving elective THA and HH for displaced femoral neck fracture.

Methods: A total of 293 patients (301 hips) aged 70 years or older (mean age, 78 years; range, 70-93) who received the same cementless plasma-sprayed porous titanium-hydroxyapatite stem were retrospectively evaluated after primary THA and HH to investigate stem survival, complications, and clinical and radiographic results.

Wear performance of inverted non-conforming bearings in anatomic total shoulder arthroplasty.

Background: Glenoid component failures still represent the most common complication in total shoulder arthroplasty. These failures depend on several factors, including ultra-high molecular weight polyethylene (UHMWPE) wear. One reason for UHMWPE wear in total shoulder arthroplasty may be the current use of a spherical prosthetic humeral head against a radially mismatched UHMWPE glenoid component, which leads to reduced glenohumeral translations, glenoid edge loading and high translational forces during shoulder motions.

Restoring global offset and lower limb length with a 3 offset option double-tapered stem.

Background: A proper restoration of hip biomechanics is fundamental to achieve satisfactory outcomes after total hip arthroplasty (THA). A global hip offset (GO) postoperatively reduction of more than 5 mm was known to impair hip functionality after THA. This study aimed to verify the restoration of the GO radiographic parameter after primary THA by the use of a cementless femoral stem available in three different offset options without length changing.

Bilateral Total Hip Replacement in Dwarfism With a Custom Laser-Printed Trabecular Acetabular Shell.

Total hip arthroplasty in cases of dwarfism may be a demanding procedure, as the small-sized joints are difficult to replace with standard prostheses, even more so in the presence of dysplastic hips. The authors report a case of bilateral customized total hip arthroplasty performed in a young patient with proportionated dwarfism with bilateral hip dysplasia. To ensure sufficient stabilization of the cup, roof bone grafting was performed.

Vitamin E-stabilized UHMWPE: Biological response on human osteoblasts to wear debris.

UHMWPE doped with vitamin E was introduced to provide oxidation resistance upon sterilization, without affecting UHMWPE's mechanical properties. Particle-induced macrophage activation leads to periprosthetic bone resorption, requiring total joint replacements. During osteolysis, osteoblasts produce osteoimmunological factors such as RANKL and OPG, and the inhibitors of the Wnt pathway DKK-1 and Sclerostin.

Effectiveness of Vitamin-E-Doped Polyethylene in Joint Replacement: A Literature Review.

Since polyethylene is one of the most frequently used biomaterials, such as in bearing components in joint arthroplasty, strong efforts have been made to improve the design and material properties over the last decades. Antioxidants, such as vitamin-E, seem to be a promising alternative to further increase durability and reduce polyethylene wear and degradation in the long-term. Nevertheless, even if several promising in vitro results are available, there is yet no clinical evidence that vitamin-E polyethylenes show these advantages in vivo.

Radiographically undetectable periprosthetic osteolysis with ASR implants: the implication of blood metal ions.

Patients with ASR implants (resurfacing and large-diameter (XL) metal-on-metal (MoM) total hip arthroplasty), even if asymptomatic and with a stable prosthesis, may present extremely high blood metal ion levels. We report on a consecutive series of fourteen ASR revisions, focusing on osteolysis and their radiographic correspondence and their correlation with blood metal ion levels. At revision, seven hips revealed severe periacetabular osteolysis which was radiographically undetectable in six and asymptomatic in five.

Cementless Metasul metal-on-metal total hip arthroplasties at 13 years.

Second-generation metal-on-metal bearings have been used since the late 1980s as alternative bearings to eliminate aseptic loosening due to polyethylene wear. The aim of the present study was to evaluate the long-term results of a series of Metasul (Zimmer GmbH, Winterthur, Switzerland) metal-on-metal total hip arthroplasty (THA). One hundred forty-nine cementless THAs with a 28-mm Metasul articulation were performed in 111 consecutive patients.

Heterotopic ossifications after arthroscopic management of femoroacetabular impingement: the role of NSAID prophylaxis.

Background: open hip surgery is known to be a risk for heterotopic ossification (HO), and nonsteroidal anti-inflammatory drugs (NSAIDs) have been widely recognized as an effective prevention. Hip arthroscopy is gaining popularity thanks to the possibility of treating femoroacetabular impingement (FAI) with a minimally invasive technique, however little is known about its rate of postoperative HO. The aim of the present study is to evaluate HO prevalence after hip arthroscopy for FAI and its relationship with NSAID prophylaxis.

Intra-articular loose body removal during hip arthroscopy.

Loose bodies are common findings in hip arthroscopy. Loose body removal can be challenging because of the inner position of the acetabulum in which the loose bodies tend to accumulate. Moreover, the standard removal procedure of a considerable number of loose bodies may need a long time under limb traction, thereby increasing the risk of complications.