Correlates of Premenstrual Syndrome in Polish Adolescents-Results from POLKA 18 Youth-Led Cross-Sectional Study.

This study aims to evaluate the prevalence of premenstrual syndrome (PMS) among Polish adolescents and explore its associations with mental health outcomes, lifestyle factors, and risk behaviours. Additionally, it seeks to examine the impact of PMS on quality of life, contributing to the foundation for initiatives that enhance adolescent menstrual health. This research is part of the POLKA 18 study, a youth-led cross-sectional survey conducted between April and December 2019.

Dysmenorrhea in Polish Adolescent Girls: Impact on Physical, Mental, and Social Well-Being-Results from POLKA 18 Study.

: Dysmenorrhea, characterised by painful menstrual cramps, is a pressing issue among adolescent girls globally. It significantly impacts their quality of life and has been associated with increased mental health issues and engagement in risky behaviours like smoking. In Poland, there is limited research on menstrual health, emphasising the need for a study to understand dysmenorrhea experiences and their impact on young menstruating individuals.

Measuring the Diameter of Single-Wall Carbon Nanotubes Using AFM.

In this work, we identify two issues that can significantly affect the accuracy of AFM measurements of the diameter of single-wall carbon nanotubes (SWCNTs) and propose a protocol that reduces errors associated with these issues. Measurements of the nanotube height under different applied forces demonstrate that even moderate forces significantly compress several different types of SWCNTs, leading to errors in measured diameters that must be minimized and/or corrected. Substrate and nanotube roughness also make major contributions to the uncertainty associated with the extraction of diameters from measured images.

HPV Vaccination among Polish Adolescents-Results from POLKA 18 Study.

Human Papillomavirus (HPV) is the main cause of cervical cancer and genital warts and constitutes one of the most common sexually transmitted infections. Cervical cancer is the only reproductive cancer that has a primary prevention programme through the introduction of HPV vaccinations. Even though the majority of European countries have nationally funded HPV vaccination programmes, in Poland these are exclusively local and scarcely funded.

Surface chemistry of metal oxide nanoparticles: NMR and TGA quantification.

Surface functionalization is widely used to control the behavior of nanomaterials for a range of applications. However, methods to accurately quantify surface functional groups and coatings are not yet routinely applied to nanomaterial characterization. We have employed a combination of quantitative NMR (qNMR) and thermogravimetric analysis (TGA) to address this problem for commercial cerium, nickel, and iron oxide nanoparticles (NPs) that have been modified to add functional coatings with (3-aminopropyl)triethoxysilane (APTES), stearic acid, and polyvinylpyrrolidone (PVP).

A Multi-Method Approach for Quantification of Surface Coatings on Commercial Zinc Oxide Nanomaterials.

Surface functionalization is a key factor for determining the performance of nanomaterials in a range of applications and their fate when released to the environment. Nevertheless, it is still relatively rare that surface groups or coatings are quantified using methods that have been carefully optimized and validated with a multi-method approach. We have quantified the surface groups on a set of commercial ZnO nanoparticles modified with three different reagents ((3-aminopropyl)-triethoxysilane, caprylsilane and stearic acid).

Formulation of Screen-Printable Cu Molecular Ink for Conductive/Flexible/Solderable Cu Traces.

Screen printing is the most common method used for the production of printed electronics. Formulating copper (Cu) inks that yield conductive fine features with oxidation and mechanical robustness on low-temperature substrates will open up opportunities to fabricate cost-effective devices. We have formulated a screen-printable Cu metal-organic decomposition (MOD) ink comprising Cu formate coordinated to 3-(diethylamino)-1,2-propanediol, a fractional amount of Cu nanoparticles (CuNPs), and a binder.

The impact of processing on the cytotoxicity of graphene oxide.

In-house prepared graphene oxide (GO) was processed base washing, sonication, cleaning and combinations of these processing techniques to evaluate the impact on the flake morphology, composition and cytotoxicity of the material. The flakes of unprocessed GO were relatively planar, but upon base washing, the flakes became textured exhibiting many folds and creases observed by AFM. In addition to the pronounced effect on the topography, base washing increased the C/O ratio and increased the cytotoxicity of GO on all four cell lines studied determined the WST-8 assay.

High-Purity Semiconducting Single-Walled Carbon Nanotubes: A Key Enabling Material in Emerging Electronics.

Semiconducting single-walled carbon nanotubes (sc-SWCNTs) are emerging as a promising material for high-performance, high-density devices as well as low-cost, large-area macroelectronics produced via additive manufacturing methods such as roll-to-roll printing. Proof-of-concept demonstrations have indicated the potential of sc-SWCNTs for digital electronics, radiofrequency circuits, radiation hard memory, improved sensors, and flexible, stretchable, conformable electronics. Advances toward commercial applications bring numerous opportunities in SWCNT materials development and characterization as well as fabrication processes and printing technologies.

Versatile Molecular Silver Ink Platform for Printed Flexible Electronics.

A silver molecular ink platform formulated for screen, inkjet, and aerosol jet printing is presented. A simple formulation comprising silver neodecanoate, ethyl cellulose, and solvent provides improved performance versus that of established inks, yet with improved economics. Thin, screen-printed traces with exceptional electrical (<10 mΩ/□/mil or 12 μΩ·cm) and mechanical properties are achieved following thermal or photonic sintering, the latter having never been demonstrated for silver-salt-based inks.

Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing.

Fully printed thin film transistors (TFT) based on poly(9,9-di-n-dodecylfluorene) (PFDD) wrapped semiconducting single walled carbon nanotube (SWCNT) channels are fabricated by a practical route that combines roll-to-roll (R2R) gravure and ink jet printing. SWCNT network density is easily controlled via ink formulation (concentration and polymer:CNT ratio) and jetting conditions (droplet size, drop spacing, and number of printed layers). Optimum inkjet printing conditions are established on Si/SiO in which an ink consisting of 6:1 PFDD:SWCNT ratio with 50 mg L SWCNT concentration printed at a drop spacing of 20 μm results in TFTs with mobilities of ∼25 cm V s and on-/off-current ratios > 10.

Analysis Method for Quantifying the Morphology of Nanotube Networks.

While atomic force microscopy (AFM) is a powerful technique for imaging assemblies and networks of nanoscale materials, approaches for quantitative assessment of the morphology of these materials are lacking. Here we present a volume-based approach for analyzing AFM images of assemblies of nano-objects that enables the extraction of relevant parameters describing their morphology. Random networks of single-walled carbon nanotubes (SWCNTs) deposited via solution-phase processing are used as an example to develop the method and demonstrate its utility.

Reaction pathways for pyridine adsorption on silicon (0 0 1).

Density functional theory is used to describe the reactions of chemisorption of pyridine on the silicon (0 0 1) surface. Adsorption energies of six relevant structures, and the activation energies between them are reported. We consider in detail the dative to tight-bridge transition for which conflicting results have been reported in the literature, and provide a description of the formation of inter-row chains observed in high-coverage experiments.

Enrichment of large-diameter semiconducting SWCNTs by polyfluorene extraction for high network density thin film transistors.

A systematic study on the use of 9,9-dialkylfluorene homopolymers (PFs) for large-diameter semiconducting (sc-) single-walled carbon nanotube (SWCNT) enrichment is the focus of this report. The enrichment is based on a simple three-step extraction process: (1) dispersion of as-produced SWCNTs in a PF solution; (2) centrifugation at a low speed to separate the enriched sc-tubes; (3) filtration to collect the enriched sc-SWCNTs and remove excess polymer. The effect of the extraction conditions on the purity and yield including molecular weight and alkyl side-chain length of the polymers, SWCNT concentration, and polymer/SWCNT ratio have been examined.

Photonic wire biosensor microarray chip and instrumentation with application to serotyping of Escherichia coli isolates.

A complete photonic wire molecular biosensor microarray chip architecture and supporting instrumentation is described. Chip layouts with 16 and 128 independent sensors have been fabricated and tested, where each sensor can provide an independent molecular binding curve. Each sensor is 50 μm in diameter, and consists of a millimeter long silicon photonic wire waveguide folded into a spiral ring resonator.

Highly sensitive electrical detection of TCNE on chemically passivated silicon-on-insulator.

Adsorption of tetracyanoethylene (TCNE) onto hydrogen terminated, n-type silicon-on-insulator is shown to cause significant depletion of majority carriers. Employing an ambient pseudo-MOSFET, ppm levels of TCNE vapour rapidly decrease the n-channel saturation current by at least two orders of magnitude. Covalent passivation with a decyl monolayer improves the reversibility of the response while only slightly decreasing the sensitivity.

Diazonium-derived aryl films on gold nanoparticles: evidence for a carbon-gold covalent bond.

Tailoring the surface chemistry of metallic nanoparticles is generally a key step for their use in a wide range of applications. There are few examples of organic films covalently bound to metal nanoparticles. We demonstrate here that aryl films are formed on gold nanoparticles from the spontaneous reduction of diazonium salts.

Electro-optic investigation of the surface trapping efficiency in n-alkanethiol SAM passivated GaAs(001).

The electro-optic characteristics of the semi-insulating and n(+)-type GaAs(001) surfaces passivated with n-alkanethiol self-assembled monolayers were investigated using Kelvin probe surface photovoltage (SPV) and photoluminescence (PL) techniques. Referencing the equilibrium surface barrier height established in an earlier report, SPV measurements demonstrated a significant (>100 mV) increase in the non-equilibrium band-bending potential observed under low-level photo-injection. Modeling of the SPV accounts for these observations in terms of a large (>10(4)) decrease in the hole/electron ratio of surface carrier capture cross-sections, which is suggested to result from the electrostatic potential of the interfacial dipole layer formed upon thiol chemisorption.

Molecular modulation of conductivity on H-terminated silicon-on-insulator substrates.

The adsorption of a range of molecular species (water, pyridine, and ammonia) is found to reversibly modulate the conductivity of hydrogen-terminated silicon-on-insulator (H-SOI) substrates. Simultaneous sheet-resistance and Hall-effect measurements on moderately doped (10(15) cm(-3)) n- and p-type H-SOI samples mounted in a vacuum system are used to monitor the effect of gas exposure in the Torr range on the electrical-transport properties of these substrates. Reversible physisorption of "hole-trapping" species, such as pyridine (C(5)H(5)N) and ammonia (NH(3)) produces highly conductive minority-carrier channels (inversion) on p-type substrates, mimicking the action of a metallic gate in a field-effect transistor.

Label-free biosensor array based on silicon-on-insulator ring resonators addressed using a WDM approach.

We report a silicon-on-insulator ring resonator biosensor array with one output port, using wavelength division multiplexing as the addressing scheme. With the use of on-chip referencing for environmental drift cancellation, simultaneous monitoring of multiplexed molecular bindings is demonstrated, with a resolution of 0.3 pg/mm(2) (40 ag of total mass) for protein concentrations over 4 orders of magnitude down to 20 pM.

Direct stabilization of a phospholipid monolayer on H-terminated silicon.

This Article describes a strategy to stabilize a phospholipid monolayer directly on the surface of a H-terminated silicon substrate in order to provide a useful platform for silicon based biosensors. The stabilization of an acrylated phospholipid monolayer is obtained by two-dimensional chain polymerization. As the formation of the lipid monolayer in aqueous solution competes with the oxidation of the silicon surface, several cycles of oxide removal and lipid exposure are necessary to densify the lipid layer.

Silicon photonic wire biosensor array for multiplexed real-time and label-free molecular detection.

We demonstrate a silicon photonic wire waveguide biosensor array chip for the simultaneous monitoring of different molecular binding reactions. The chip is compatible with automated commercial spotting tools and contains a monolithically integrated microfluidic channel for sample delivery. Each array sensor element is a 1.

Silicon-on-insulator guided mode resonant grating for evanescent field molecular sensing.

We present experimental and theoretical results of label-free molecular sensing using the transverse magnetic mode of a 0.22 mum thick silicon slab waveguide with a surface grating implemented in a guided mode resonance configuration. Due to the strong overlap of the evanescent field of the waveguide mode with a molecular layer attached to the surface, these sensors exhibit high sensitivity, while their fabrication and packaging requirements are modest.

Surface dipole layer potential induced ir absorption enhancement in n-alkanethiol SAMs on GaAs(001).

The work function of n-alkanethiol self-assembled monolayers (SAMs) prepared on the GaAs(001) surface was measured using the Kelvin probe technique yielding the SAM 2D dipole layer potential (DLP). Direct n-dependent proportionality between the DLP values and the C-H stretching mode infrared (IR) absorption intensities was observed, which supports a correspondence of reported IR enhancements with the electrostatic properties of the interface. X-ray photoelectron spectroscopy is also used to verify the work function measurements.