Iron-Oxide Nanoparticles Embedded in 3D-Printed PLA/HA Scaffolds for Magnetic Hyperthermia Therapy: An Experimental-Numerical Analysis of Thermal Behavior.

Hyperthermia is nowadays intensively investigated as a promising strategy to improve the therapeutic efficacy against different types of cancer and resistant infections. In particular, the remote generation of localized hyperthermia by magnetic field through iron-oxide nanoparticles (IONPs) offers good thermal conductivity in a controlled area. The incorporation of these IONPs in 3D-printed scaffolds designed for bone tissue regeneration has been scarcely addressed in the literature.

Hydrothermal extraction of ulvans from Ulva spp. in a biorefinery approach.

A simple cascade process based on the hydrothermal fractionation of Ulva spp. biomass was proposed. Considering the overall extraction yields (50 %), ulvan recovery (23 %), and ulvan composition, structural, mechanical and cytotoxic properties, the selected optimal final heating temperature was 160 °C.

Shared germline genomic variants in two patients with double primary gastrointestinal stromal tumours (GISTs).

Background: Gastrointestinal stromal tumours (GISTs) are prevalent mesenchymal tumours of the gastrointestinal tract, commonly exhibiting structural variations in and genes. While the mutational profiling of somatic tumours is well described, the genes behind the susceptibility to develop GIST are not yet fully discovered. This study explores the genomic landscape of two primary GIST cases, aiming to identify shared germline pathogenic variants and shed light on potential key players in tumourigenesis.

Imaging the Granzyme Mediated Host Immune Response to Viral and Bacterial Pathogens Using Positron Emission Tomography.

Understanding how the host immune system engages complex pathogens is essential to developing therapeutic strategies to overcome their virulence. While granzymes are well understood to trigger apoptosis in infected host cells or bacteria, less is known about how the immune system mobilizes individual granzyme species to combat diverse pathogens. Toward the goal of studying individual granzyme function directly , we previously developed a new class of radiopharmaceuticals termed "restricted interaction peptides (RIPs)" that detect biochemically active endoproteases using positron emission tomography (PET).

HMGA1 regulates trabectedin sensitivity in advanced soft-tissue sarcoma (STS): A Spanish Group for Research on Sarcomas (GEIS) study.

HMGA1 is a structural epigenetic chromatin factor that has been associated with tumor progression and drug resistance. Here, we reported the prognostic/predictive value of HMGA1 for trabectedin in advanced soft-tissue sarcoma (STS) and the effect of inhibiting HMGA1 or the mTOR downstream pathway in trabectedin activity. The prognostic/predictive value of HMGA1 expression was assessed in a cohort of 301 STS patients at mRNA (n = 133) and protein level (n = 272), by HTG EdgeSeq transcriptomics and immunohistochemistry, respectively.

Enhanced Bone Healing in Critical-Sized Rabbit Femoral Defects: Impact of Helical and Alternate Scaffold Architectures.

This study investigates the effect of scaffold architecture on bone regeneration, focusing on 3D-printed polylactic acid-bioceramic calcium phosphate (PLA-bioCaP) composite scaffolds in rabbit femoral condyle critical defects. We explored two distinct scaffold designs to assess their influence on bone healing and scaffold performance. Structures with alternate (0°/90°) and helical (0°/45°/90°/135°/180°) laydown patterns were manufactured with a 3D printer using a fused deposition modeling technique.

Comparison of Bone Mineral Density and Trabecular Bone Score in Patients with and without Vertebral Fractures and Differentiated Thyroid Cancer with Long-Term Serum Thyrotrophin-Suppressed Therapy.

Introduction: The study of BMD provides only partial information on bone health in patients undergoing TSH suppression therapy due to differentiated thyroid cancer (DTC). The trabecular bone score (TBS), a new parameter assessing bone microarchitecture, is proposed for studying bone in this context. This study aimed to analyze their long-term use in patients with DTC.

Peptidoglycan-Targeted [F]3,3,3-Trifluoro-d-alanine Tracer for Imaging Bacterial Infection.

Imaging is increasingly used to detect and monitor bacterial infection. Both anatomic (X-rays, computed tomography, ultrasound, and MRI) and nuclear medicine ([In]-WBC SPECT, [F]FDG PET) techniques are used in clinical practice but lack specificity for the causative microorganisms themselves. To meet this challenge, many groups have developed imaging methods that target pathogen-specific metabolism, including PET tracers integrated into the bacterial cell wall.

DyMnO: Synthesis, Characterization and Evaluation of Its Photocatalytic Activity in the Visible Spectrum.

DyMnO is a p-type semiconductor oxide with two crystal systems, orthorhombic and hexagonal. This material highlights its ferroelectric and ferromagnetic properties, which have been the subject of numerous studies. Nevertheless, its photocatalytic activity has been less explored.

Imaging the Bacterial Cell Wall Using -Acetyl Muramic Acid-Derived Positron Emission Tomography Radiotracers.

Imaging infections in patients is challenging using conventional methods, motivating the development of positron emission tomography (PET) radiotracers targeting bacteria-specific metabolic pathways. Numerous techniques have focused on the bacterial cell wall, although peptidoglycan-targeted PET tracers have been generally limited to the short-lived carbon-11 radioisotope ( = 20.4 min).

A fluorogenic micrococcal nuclease-based probe for fast detection and optical imaging of Staphylococcus aureus in prosthetic joint and fracture-related infections.

Purpose: Staphylococcus aureus is the most common and impactful multi-drug resistant pathogen implicated in (periprosthetic) joint infections (PJI) and fracture-related infections (FRI). Therefore, the present proof-of-principle study was aimed at the rapid detection of S. aureus in synovial fluids and biofilms on extracted osteosynthesis materials through bacteria-targeted fluorescence imaging with the 'smart-activatable' DNA-based AttoPolyT probe.

Vancomycin-Loaded 3D-Printed Polylactic Acid-Hydroxyapatite Scaffolds for Bone Tissue Engineering.

The regeneration of bone remains one of the main challenges in the biomedical field, with the need to provide more personalized and multifunctional solutions. The other persistent challenge is related to the local prevention of infections after implantation surgery. To fulfill the first one and provide customized scaffolds with complex geometries, 3D printing is being investigated, with polylactic acid (PLA) as the biomaterial mostly used, given its thermoplastic properties.

Chemoenzymatic Syntheses of Fluorine-18-Labeled Disaccharides from [F] FDG Yield Potent Sensors of Living Bacteria .

Chemoenzymatic techniques have been applied extensively to pharmaceutical development, most effectively when routine synthetic methods fail. The regioselective and stereoselective construction of structurally complex glycans is an elegant application of this approach that is seldom applied to positron emission tomography (PET) tracers. We sought a method to dimerize 2-deoxy-[F]-fluoro-d-glucose ([F]FDG), the most common tracer used in clinical imaging, to form [F]-labeled disaccharides for detecting microorganisms based on their bacteria-specific glycan incorporation.

Physicochemical Properties of 3D-Printed Polylactic Acid/Hydroxyapatite Scaffolds.

The reconstruction or regeneration of damaged bone tissue is one of the challenges of orthopedic surgery and tissue engineering. Among all strategies investigated, additive manufacturing by fused deposition modeling (3D-FDM printing) opens the possibility to obtain patient-specific scaffolds with controlled architectures. The present work evaluates in depth 3D direct printing, avoiding the need for a pre-fabricated filament, to obtain bone-related scaffolds from direct mixtures of polylactic acid (PLA) and hydroxyapatite (HA).

Review article laser-induced hyperthermia on graphene oxide composites.

Background: Hyperthermia-based therapies have shown great potential for clinical applications such as for the antitumor and antipathogenic activities. Within all strategies, the so-called photothermal therapy proposes to induce the hyperthermia by the remote laser radiation on a photothermal conversion agent, in contact with the target tissue.

Methods: This paper reviews the most relevant in vitro and in vivo studies focused on NIR laser-induced hyperthermia due to photoexcitation of graphene oxide (GO) and reduced graphene oxide (rGO).

Chemoenzymatic syntheses of fluorine-18-labeled disaccharides from [ F]FDG yield potent sensors of living bacteria .

Chemoenzymatic techniques have been applied extensively to pharmaceutical development, most effectively when routine synthetic methods fail. The regioselective and stereoselective construction of structurally complex glycans is an elegant application of this approach, that is seldom applied to positron emission tomography (PET) tracers. We sought a method to dimerize 2-deoxy-[ F]-fluoro-D-glucose ([ F]FDG), the most common tracer used in clinical imaging, to form [ F]-labeled disaccharides for detecting microorganisms based on their bacteria-specific glycan incorporation.

3D printing of PLA:CaP:GO scaffolds for bone tissue applications.

Graphene oxide (GO) has attracted increasing interest for biomedical applications owing to its outstanding properties such as high specific surface area, ability to bind functional molecules for therapeutic purposes and solubility, together with mechanical resistance and good thermal conductivity. The combination of GO with other biomaterials, such as calcium phosphate (CaP) and biodegradable polymers, presents a promising strategy for bone tissue engineering. Presently, the development of these advanced biomaterials benefits from the use of additive manufacturing techniques, such as 3D printing.

Determining the Photoelectrical Behavior and Photocatalytic Activity of an h-YMnO New Type of Obelisk-like Perovskite in the Degradation of Malachite Green Dye.

YMnO is a P-type semiconductor with a perovskite-type structure (ABO). It presents two crystalline systems: rhombohedral and hexagonal, the latter being the most stable and studied. In the hexagonal system, Mn ions are coordinated by five oxygen ions forming a trigonal bipyramid, and the Y ions are coordinated by five oxygen ions.

Thermal Behavior of Graphene Oxide Deposited on 3D-Printed Polylactic Acid for Photothermal Therapy: An Experimental-Numerical Analysis.

The present work evaluates the thermal behavior of graphene oxide (GO) when deposited on 3D-printed polylactic acid (PLA), in order to develop a medical device for photothermal therapy applications. An experimental-numerical analysis was performed to assess the photothermal conversion capacity, based on the power emitted by a NIR (785 nm) laser, and the subsequent temperature distribution on the GO-PLA material. The influence of the deposited mass of GO and the PLA thickness was studied through 40 different scenarios.

Efficacy of Eribulin Plus Gemcitabine Combination in L-Sarcomas.

Although the overall survival of advanced soft-tissue sarcoma (STS) patients has increased in recent years, the median progression-free survival is lower than 5 months, meaning that there is an unmet need in this population. Among second-line treatments for advanced STS, eribulin is an anti-microtubule agent that has been approved for liposarcoma. Here, we tested the combination of eribulin with gemcitabine in preclinical models of L-sarcoma.

3D-Printed PLA Medical Devices: Physicochemical Changes and Biological Response after Sterilisation Treatments.

Polylactic acid (PLA) has become one of the most commonly used polymers in medical devices given its biocompatible, biodegradable and bioabsorbable properties. In addition, due to PLA's thermoplastic behaviour, these medical devices are now obtained using 3D printing technologies. Once obtained, the 3D-printed PLA devices undergo different sterilisation procedures, which are essential to prevent infections.