Preliminary manifestation of the Yangtze River Protection Strategy in improving the carbon sink function of estuary wetlands.

In 2016, the Yangtze River Protection Strategy was proposed and a series of measures were applied to restore the health and function of the Yangtze River ecosystem. However, the impact of these measures on the carbon (C) sink capacity of the Yangtze River estuary wetlands has not been exhaustively studied. In this work, the effects of these measures on the C sink capacity of Yangtze River estuary wetlands were examined through the long-term monitoring of C fluxes, soil respiration, plant growth and water quality.

Multifunctional composite films based on polyvinyl alcohol, quaternary ammonium salt modified cellulose nanofibers and tannic acid-iron ion coordination complexes for food packaging.

The development of sustainable and well-performing food packaging materials takes on critical significance, whereas it is still challenging. To overcome the shortcomings of polyvinyl alcohol (PVA) as a degradable packaging material, in this work, hydrophobic quaternary ammonium salt (QAS) modified cellulose nanofibers (CNF) and tannic acid‑iron ion coordination complexes (TA-Fe) were adopted for the preparation of functional PVA films. The modified CNF (CNF-QAS) not only improved the mechanical properties and water resistance of PVA, but also endowed it with antibacterial ability.

Research on User Behavior Based on Higher-Order Dependency Network.

In the era of the popularization of the Internet of Things (IOT), analyzing people's daily life behavior through the data collected by devices is an important method to mine potential daily requirements. The network method is an important means to analyze the relationship between people's daily behaviors, while the mainstream first-order network (FON) method ignores the high-order dependencies between daily behaviors. A higher-order dependency network (HON) can more accurately mine the requirements by considering higher-order dependencies.

A nitrocellulose/cotton fiber hybrid composite membrane for paper-based biosensor.

Nitrocellulose (NC) membrane was fabricated and tested for its potential use in various paper-based biosensors for use in point-of-care testing. However, contemporary technologies are complex, expensive, non-scalable, limited by conditions, and beset with potentially adverse effects on the environment. Herein, we proposed a simple, cost-effective, scalable technology to prepare nitrocellulose/cotton fiber (NC/CF) composite membranes.

Eco-friendly cellulose-based hydrogel functionalized by NIR-responsive multimodal antibacterial polymeric ionic liquid as platform for promoting wound healing.

With the trend of sustainable development and the complex medical environment, there is a strong demand for multimodal antibacterial cellulose wound dressing (MACD) with photothermal therapy (PTT). Herein, a novel MACD fabrication strategy with PTT was proposed and implemented through graft polymerization of an imidazolium ionic liquid monomer containing iron complex anion structure. The fabricated hydrogels exhibited excellent antibacterial properties because of the efficient photothermal conversion ability (68.

High-performance functional cellulose foam fabricated with theoretically optimized imidazolium salts for the efficient removal of ciprofloxacin.

With the increasing requirements for sustainable development and environmental protection, the design and development of bio-adsorbent based on the widely sourced cellulose have attracted widespread attention. In this study, a polymeric imidazolium satls (PIMS) functionalized cellulose foam (CF@PIMS) was conveniently fabricated. It was then employed to efficiently remove ciprofloxacin (CIP).

Tidal organic input restricts CO sequestration capacity of estuarine wetlands.

The inland and estuary wetlands that characterized by different natural environment perform distinctly in soil carbon (C) sink. It was deemed that estuary wetland has a higher organic C accumulation rate than inland wetland, due to its higher primary production and tidal organics input, thus having higher organic C sink capacity. While from CO budge in view, whether does the large organic input from tide restrict CO sequestration capacity of estuary wetland has not been discussed comparing with inland wetland.

The high organic carbon accumulation in estuarine wetlands necessarily does not represent a high CO sequestration capacity.

Estuarine wetlands with high organic carbon (OC) accumulation rates due to their high plant biomass and interception of tide-derived OC are generally considered as large CO sinks. However, our previous study found that tidal OC input seems to stimulate soil CO emissions, potentially weakening CO sequestration in estuarine wetlands. To further verify this phenomenon, we first established a structural equation model, which confirmed a positive correlation between tidal OC input and soil organic carbon (SOC) and soil respiration.

Fabrication of efficient protein imprinted materials based on pearl necklace-like MOFs bacterial cellulose composites.

The acquisition of efficient protein isolation substances is vital for proteomic research, whereas it's still challenging nowadays. Herein, an elaborately designed protein imprinted material based on a bacterial cellulose@ZIF-67 composite carrier (BC@ZIF-67) is proposed for the first time. In particular, due to the ultrafine fiber diameter and abundant hydroxyl functional groups of the bacterial cellulose, BC@ZIF-67 presented a compact arrangement structure similar to a pearl necklace, which greatly promoted template immobilization and mass transfer resistance in protein imprinting technology.

Constructing High-Recognition Protein-Imprinted Materials Using "Specially Designed" Block Macromolecular Chains as Functional Monomers and Crosslinkers.

The use of a macromolecularly functional monomer and crosslinker (MFM) to stabilize and imprint a template protein is a new method to construct high-recognition protein-imprinted materials. In this study, for the first time, a "specially designed" block MFM with both "functional capability" and "crosslinking capability" segments was synthesized via reversible addition-fragmentation chain-transfer polymerization and used to fabricate bovine serum albumin (BSA)-imprinted microspheres (SiO@MPS@MIPs-MFM) by the surface imprinting strategy. Results from circular dichroic spectrum experiments reflected that the block MFM could maintain the natural form of BSA, whereas its corresponding and equivalent micromolecularly functional monomer (MIM) seriously destroyed the secondary structure of proteins.

Dendrimer-assisted boronate affinity cellulose foams for the efficient and selective separation of glycoproteins.

Surfaces engineered to identify and enrich glycoproteins are of considerable interest in the diagnostic and detection fields. A boronate affinity (BA) material was proposed as a potential candidate for the isolation of glycoproteins. However, this material has the disadvantages of low efficiency and non-degradability.

Evaluation of the carbon accumulation capability and carbon storage of different types of wetlands in the Nanhui tidal flat of the Yangtze River estuary.

Wetlands are carbon pools for terrestrial ecosystems and play an important role in the global carbon cycle. The Nanhui tidal flat is located at the Yangtze River estuary and has been disturbed by various human activities. However, the effect of human activities on the carbon accumulation capability and carbon storage of wetlands in the Nanhui tidal flat is poorly understood.

Conversion behaviors of litter-derived organic carbon of two halophytes in soil and their influence on SOC stabilization of wetland in the Yangtze River Estuary.

Soil organic carbon (SOC) is both a product and a cause of soil development. Previous studies found that less carbon (C) is fixed by Phragmites communis than Spartina alterniflora in the Jiuduansha wetland of the Yangtze River Estuary. However, the P.

Spatial distribution patterns of annual soil carbon accumulation and carbon storage in the Jiuduansha wetland of the Yangtze River estuary.

Wetlands are important carbon (C) pools for terrestrial ecosystems, and C stored in different types of wetlands accounts for about 30% of total terrestrial C. As one of the most important ecological barriers in Shanghai, with functions of climate regulation, interception, and purification, and as a C sink, the Jiuduansha wetland has received research attention. However, little research has been done on the spatial differences in amount of average annual net C accumulation and C storage of each shoal: Jiangya Nansha, Shangsha, and Zhongxiasha.

A polyethylenimine/salicylaldehyde modified cellulose Schiff base for selective and sensitive Fe detection.

We describe a new solid-state colorimetric sensor synthesized by micro-crystalline cellulose (MCC) in the presence of polyethylenimine (PEI) and salicylaldehyde (SA) via an oxidation process and two successive Schiff base reactions. The formation of the Fe complex led to color change detectable by eye, as well as an absorption peak at 501 nm causing fluorescence quenching. The signal was linear with the concentration ranging from 4 to 20 ppm; the detection limit is 0.

A Flexible Multimodal Sensor That Detects Strain, Humidity, Temperature, and Pressure with Carbon Black and Reduced Graphene Oxide Hierarchical Composite on Paper.

Flexible sensors (FSs) are the key components of intelligent equipment and wearable devices, thus attracting increasing research interests in recent years. However, the preparation of multifunctional FS with good degradability in a natural environment is still challenging. In this work, we fabricated a flexible multimodal sensor that can detect multiple stimuli with only one device by spraying the mixture of carbon black (CB) and reduced graphene oxide (rGO) on a paper substrate.

Can multiple harvests of plants improve nitrogen removal from the point-bar soil of lake?

Point bar areas around lakes can provide ecological service functions. For example, plants growing on point bars absorb and remove nutrients from the soil and water. However, if the point-bar plants are unregulated, in the fall and winter, plant debris will decompose, releasing nutrients that then enter the water body and cause eutrophication.

Preparation of a poly(ionic liquid)-functionalized cellulose aerogel and its application in protein enrichment and separation.

In this work, a novel poly(ionic liquid) with 1-vinyl-3-aminopropyl imidazolium cations was designed and used to modify cellulose aerogels via Schiff base reaction. The poly(ionic liquid) modified cellulose aerogels (PIL-CA) exhibited a well-interconnected porous structure and a high porosity of 86.2%.

Molecularly Imprinted Materials for Selective Biological Recognition.

Molecular imprinting is an approach of generating imprinting cavities in polymer structures that are compatible with the target molecules. The cavities have memory for shape and chemical recognition, similar to the recognition mechanism of antigen-antibody in organisms. Their structures are also called biomimetic receptors or synthetic receptors.

Preparation of Molecularly Imprinted Mesoporous Materials for Highly Enhancing Adsorption Performance of Cytochrome C.

Molecularly imprinted mesoporous materials (MIMs) were synthesized to improve the adsorption performance of Cytochrome c (Cyt c) by using an imidazolium-based amphiphilic ionic liquid 1-octadecyl-3-methylimidazolium chloride (CMIMCl) as surfactant in aqueous solution via the epitope imprinting approach. The surface-exposed C-terminus nonapeptide of Cyt c (residues 96⁻104, AYLKKATNE) was utilized as the imprinted template. The nitrogen adsorption-desorption, thermo-gravimetric analysis, and transmission electron microscopy verified the successful preparation of MIMs with ordered mesoporous structure.

Comparative analysis of gene expression profiles in children with type 1 diabetes mellitus.

Type 1 diabetes (T1D) is an autoimmune disease that is typically diagnosed in children. The aim of the present study was to identify potential genes involved in the pathogenesis of childhood T1D. Two datasets of mRNA expression in children with T1D were obtained from the Gene Expression Omnibus (GEO).

Design and preparation of metal-organic framework papers with enhanced mechanical properties and good antibacterial capacity.

In this study, a biodegradable paper-based composite with good mechanical and antibacterial properties was obtained by first reinforcing the cotton pulp-based paper with carboxylated cellulose nanofiber (CNF) via the Williamson reaction, followed by in situ generating zeolitic imidazolate framework-67 (ZIF-67) nanoparticles on the surface of the resulting cellulosic material. The mechanical properties and antibacterial activities of the resulting composite were investigated. The tensile testing demonstrated that the composites prepared with 2.