Melamine-Copolymerization Strategy Engineered Fluorinated Polyimides for Membrane-Based Sour Natural Gas Separation.

Membrane-based gas separation provides an energy-efficient approach for the simultaneous CO and HS removal from sour natural gas. The fluorinated polyimide (PI) membranes exhibited a promising balance between permeability and permselectivity for sour natural gas separation. To further improve the separation efficiency of fluorinated PI membranes, a melamine-copolymerization synthetic approach is devised that aims to incorporate melamine motifs with high sour gas affinity into the structure of the PI membranes.

Synergistic Tuning of Microstructure and Morphology in Carbon Molecular Sieve Hollow Fibers for Propylene/Propane Separation.

Asymmetric carbon molecular sieve (CMS) hollow fiber membranes with tunable micro- and macro-structural morphologies for energy efficient propylene-propane separation are reported here. A sub-glass transition temperature (sub-Tg) thermal oxidative crosslinking strategy enables simultaneous optimization of the intrinsic molecular sieving properties while also reducing the thickness of the CMS "skin" derived from the 6FDA : BPDA/DAM polyimide precursors. Such synergistic tuning of CMS microstructure and macroscopic morphology of CMS hollow fibers enables significantly increased propylene permeance (reaching 186.

Above-T Annealing Benefits in Nanoparticle-Stabilized Carbon Molecular Sieve Membrane Pyrolysis for Improved Gas Separation.

Nanoparticles can suppress asymmetric precursor support collapse during pyrolysis to create carbon molecular sieve (CMS) membranes. This advance allows elimination of standard sol-gel support stabilization steps. Here we report a simple but surprisingly important thermal soaking step at 400 °C in the pyrolysis process to obtain high performance CMS membranes.

Appealing sheath-core spun high-performance composite carbon molecular sieve membranes.

Carbon molecular sieve (CMS) membranes are attractive candidates to meet requirements for challenging gas separations. The added ability to maintain such intrinsic properties in an asymmetric morphology with a structure that we term a "Pseudo Wheel+Hub & Spoke" asymmetric form offers new opportunities. For CMS membrane, specifically, the structure provides both selective layer support and low flow resistance even for high feed pressures and fluxes in CO removal from natural gas.

Advanced carbon molecular sieve membranes derived from molecularly engineered cross-linkable copolyimide for gas separations.

Carbon molecular sieve (CMS) membranes with precise molecular discrimination ability and facile scalability are attractive next-generation membranes for large-scale, energy-efficient gas separations. Here, structurally engineered CMS membranes derived from a tailor-made cross-linkable copolyimide with kinked structure are reported. We demonstrate that combining two features, kinked backbones and cross-linkable backbones, to engineer polyimide precursors while controlling pyrolysis conditions allows the creation of CMS membranes with improved gas separation performance.

New Insights into Physical Aging-Induced Structure Evolution in Carbon Molecular Sieve Membranes.

Carbon molecular sieve (CMS) membranes offer the best available combination of scalable economical processability with excellent separation performance. Physical aging of CMS membranes causes pore structure changes over time that affect CMS membrane performance. To provide fundamental insights into the structure evolution in CMS membranes during physical aging, a combined dual-mode sorption and transport model is used in this study to characterize the diffusion coefficients of gas molecules in fresh and 7-day vacuum aged CMS membranes.

Key Features of Polyimide-Derived Carbon Molecular Sieves.

Carbon molecular sieve (CMS) membranes have impressive separation properties; however, both chemical and morphology structures need to be understood better. Here we characterize CMS with the simplest polyimide (PI) PMDA/pPDA (PMDA=pyromellitic dianhydride, pPDA=p-phenylenediamine), using FTIR, solid-state N-NMR and C-NMR, XPS, XRD, and Raman spectra to study chemical structure. We also compare gas separation properties for this CMS to a CMS derived from a more conventional PI precursor.

Formed Weave Cage-Like Nanostructure Wrapped Mesoporous Micron Silicon Anode for Enhanced Stable Lithium-Ion Battery.

The low-cost and high-capacity micron silicon is identified as the suitable anode material for high-performance lithium-ion batteries (LIBs). However, the particle fracture and severe capacity fading during electrochemical cycling greatly impede the practical application of LIBs. Herein, we first proposed an reduction and template assembly strategy to attain a weave cage-like carbon nanostructure, composed of short carbon nanotubes and small graphene flakes, as a flexible nanotemplate that closely wrapped micron-sized mesoporous silicon (PSi) to form a robust composite construction.

Long-Term Stable Hollowed Silicon for Li-Ion Batteries Based on an Improved Low-Temperature Molten Salt Strategy.

Nanostructured hollow silicon has attracted tremendous attention as high-performance anode materials in Li-ion battery applications. However, the large-scale production of pure hollowed silicon with long cycling stability is still a great challenge. Here, we report an improved low-temperature molten salt strategy to synthesize nanosized hollowed silicon with a stable structure on a large scale.

Molecularly Engineered 6FDA-Based Polyimide Membranes for Sour Natural Gas Separation.

Glassy polyimide membranes are attractive for industrial applications in sour natural gas purification. Unfortunately, the lack of fundamental understanding of relationships between polyimide chemical structures and their gas transport properties in the presence of H S constrains the design and engineering of advanced membranes for such challenging applications. Herein, 6FDA-based polyimide membranes with engineered structures were synthesized to tune their CO /CH and H S/CH separation performances and plasticization properties.

Enhanced Stability Lithium-Ion Battery Based on Optimized Graphene/Si Nanocomposites by Templated Assembly.

Considering the sharp increase in energy demand, Si-based composites have shown promise as high-performance anodes for lithium-ion batteries during the last few years. However, a significant volume change of Si during repetitive cycles may cause technical and security problems that limit the particular application. Here, an optimized reduced graphene oxide/silicon (RGO/Si) composite with excellent stability has been fabricated via a facile templated self-assembly strategy.

Improved Anti-Biofouling Performance of Thin -Film Composite Forward-Osmosis Membranes Containing Passive and Active Moieties.

Forward osmosis (FO) has gained increasing attention in desalination, wastewater treatment, and power generation. However, biofouling remains a major obstacle for the sustainable development of the FO process. Both passive and active strategies have been developed to mitigate membrane biofouling.

Surface Engineering of Thin Film Composite Polyamide Membranes with Silver Nanoparticles through Layer-by-Layer Interfacial Polymerization for Antibacterial Properties.

We developed a simple and facile approach to covalently immobilize Ag nanoparticles (NPs) onto polyamide surfaces of thin film composite membranes through layer-by-layer interfacial polymerization (LBL-IP) for biofouling mitigation. Stable and uniform bovine serum albumin (BSA) capped Ag NPs with an average diameter of around 20 nm were synthesized using BSA as a template under the assistance of sonication, and Ag NPs incorporated thin film composite (TFC) polyamide membrane was then fabricated by LBL-IP on a nanoporous polysulfone (PSf) substrate upon sequential coating with m-phenylenediamine (MPD) aqueous solution, trimesoyl chloride (TMC)-hexane solution, and finally BSA-capped Ag NPs aqueous solution. The influence of Ag NPs incorporation was investigated on the surface physicochemical properties, water permeability, and salt rejection of TFC polyamide membrane.

Radioiodine-labeled anti-epidermal growth factor receptor binding bovine serum albumin-polycaprolactone for targeting imaging of glioblastoma.

The aim of this study was to look for a new medicine in diagnosing and treating of glioblastoma. Radioiodine-labeled anti-epidermal growth factor receptor (EGFR) binding nanoparticles were constructed. In vitro cell-binding assays were confirmed by confocal microscopy and flow cytometry.

A Protein-Polymer Bioconjugate-Coated Upconversion Nanosystem for Simultaneous Tumor Cell Imaging, Photodynamic Therapy, and Chemotherapy.

Combined cancer therapy possesses many advantages including improved tumoricidal efficacy, reduced side effects, and retarded drug resistance. Herein, a protein-polymer bioconjugate-coated multifunctional upconversion nanosystem, consisting of upconversion nanoparticles (UCNs) core, tailored amphiphilic protein-polymer bioconjugate shell, and photosensitizer zinc phthalocyanine (ZnPc) and antitumor drug doxorubicin coloaded inside, was elaborately developed for combined photodynamic therapy (PDT) and chemotherapy. In this system, UCNs core could convert deep penetrating near-infrared light to visible light for simultaneous cell fluorescence imaging and photodynamic therapy by activating ZnPc to generate cytotoxic ROS, while the protective shell of bovine serum albumin-poly(ε-caprolactone) (BSA-PCL) offered excellent water solubility, good stability, and low cytotoxicity.

Surface-independent one-pot chelation of copper ions onto filtration membranes to provide antibacterial properties.

A one-pot method was developed for the chelation of copper ions onto the surface of filtration membrane to provide antibacterial properties. This simple, universal and cost-effective dopamine-Cu approach provides a method of mitigating the long-term biofouling of surfaces.

Sustainable Antibiofouling Properties of Thin Film Composite Forward Osmosis Membrane with Rechargeable Silver Nanoparticles Loading.

Microbial attachment and biofilm formation on filtration membrane can greatly compromise its flux and separation efficiency. Here, a simple and facile approach has been developed to in situ generate silver nanoparticles (Ag NPs) on the thin film composite forward osmosis (TFC FO) membrane for sustainable antibiofouling performances. Mussel-inspired dopamine chemistry was applied to grow polydopamine coating on both surfaces of FO membranes, followed by the generation of Ag NPs upon a simple dip coating in silver nitrate aqueous solution.

A Highly Photostable Hyperbranched Polyglycerol-Based NIR Fluorescence Nanoplatform for Mitochondria-Specific Cell Imaging.

Considering the critical role of mitochondria in the life and death of cells, non-invasive long-term tracking of mitochondria has attracted considerable interest. However, a high-performance mitochondria-specific labeling probe with high photostability is still lacking. Herein a highly photostable hyperbranched polyglycerol (hPG)-based near-infrared (NIR) quantum dots (QDs) nanoplatform is reported for mitochondria-specific cell imaging.

Evaluation of therapeutic effectiveness of (131)I-antiEGFR-BSA-PCL in a mouse model of colorectal cancer.

Aim: To investigate the biological effects of internal irradiation, and the therapeutic effectiveness was assessed of (131)I-labeled anti-epidermal growth factor receptor (EGFR) liposomes, derived from cetuximab, when used as a tumor-targeting carrier in a colorectal cancer mouse model.

Methods: We described the liposomes and characterized their EGFR-targeted binding and cellular uptake in EGFR-overexpressing LS180 colorectal cancer cells. After intra-tumor injections of 74 MBq (740 MBq/mL) (131)I-antiEGFR-BSA-PCL, we investigated the biological effects of internal irradiation and the therapeutic efficacy of (131)I-antiEGFR-BSA-PCL on colorectal cancer in a male BALB/c mouse model.

Radionuclide therapy using ¹³¹I-labeled anti-epidermal growth factor receptor-targeted nanoparticles suppresses cancer cell growth caused by EGFR overexpression.

Introduction: Anti-epidermal growth factor receptor (EGFR)-targeted nanoparticles can be used to deliver a therapeutic and imaging agent to EGFR-overexpressing tumor cells. (131)I-labeled anti-EGFR nanoparticles derived from cetuximab were used as a tumor-targeting vehicle in radionuclide therapy.

Methods: This paper describes the construction of the anti-EGFR nanoparticle EGFR-BSA-PCL.

Facile Construction of Near Infrared Fluorescence Nanoprobe with Amphiphilic Protein-Polymer Bioconjugate for Targeted Cell Imaging.

A simple, straightforward, and reproducible strategy for the construction of a near-infrared (NIR) fluorescence nanoprobe was developed by coating CuInS2/ZnS quantum dots (CIS/ZnS QDs) with a novel amphiphilic bioconjugate. The amphiphilic bioconjugate with a tailor-designed structure of bovine serum albumin (BSA) as the hydrophilic segment and poly(ε-caprolactone) (PCL) as the hydrophobic part was fabricated by chemical coupling the hydrophobic polymer chain to BSA via the maleimide-sulfhydryl reaction. By incorporating CIS/ZnS QDs into the hydrophobic cores of the self-assembly of BSA-PCL conjugate, the constructed NIR fluorescence nanoprobe exhibited excellent fluorescent properties over a wide pH range (pH 3-10) and a good colloidal stability in PBS buffer (pH = 7.

pHe-induced charge-reversible NIR fluorescence nanoprobe for tumor-specific imaging.

Inspired by the specificity of acid tumor microenvironment, we constructed a flexible charge-reversible near-infrared (NIR) fluorescence nanoprobe in response to tumor extracellular pH (pHe) for effective tumor-specific imaging. The nanoprobe consists of an NIR-emitted CuInS2/ZnS quantum dot (CIS/ZS QDs) core and a tailored lauric acid and 2,3-dimethylmaleic anhydride modified ε-polylysine (ε-PL-g-LA/DMA) shell, which provides not only a dense protective layer for the QDs but also the ability of pHe-induced positive charge-mediated endocytosis into tumor cells. The results showed that the QDs@ε-PL-g-LA/DMA nanoprobe with a uniform size of 40 nm had high chemical stability at pH 7.

Color Tunable Gd-Zn-Cu-In-S/ZnS Quantum Dots for Dual Modality Magnetic Resonance and Fluorescence Imaging.

Inorganic nanoparticles have been introduced into biological systems as useful probes for diagnosis and imaging, due to their relatively small size and exceptional physical and chemical properties. A new kind of color tunable Gd-Zn-Cu-In-S/ZnS (GZCIS/ZnS) quantum dots (QDs) with stable crystal structure was successfully synthesized and utilized for magnetic resonance (MR) and fluorescence dual modality imaging. This strategy allows successful fabrication of GZCIS/ZnS QDs by incorporating Gd into ZCIS/ZnS QDs to achieve great MR enhancement without compromising the fluorescence properties of the initial ZCIS/ZnS QDs.

pH- and reduction-responsive polymeric lipid vesicles for enhanced tumor cellular internalization and triggered drug release.

Enhanced tumor cellular internalization and triggered drug release are two main concerns in the development of nanoparticles for antitumor drug delivery. In this article, a new kind of smart pH- and reduction-dual-responsive drug- loaded PEG coated polymeric lipid vesicle (PPLV) that can achieve both enhanced tumor cellular internalization and triggered drug release has been designed and prepared. The PPLVs were formed from amphiphilic dextran derivatives.