High detail resolution cellulose structures through electroprinting.

Electrospinning is a technique used to fabricate polymer fibers in micro- and nanoscales. Due to the large distance between the nozzle and collector, there is a limited positioning accuracy of electrospun fibers. To enhance the possibility of fabricating structures with micrometer placement, an electroprinting technique has been developed.

Off-the-shelf medication transformed: Custom-dosed metoprolol tartrate tablets via semisolid extrusion additive manufacturing and the perception of this technique in a hospital context.

Pharmacies are currently unable to stock proper oral dosage forms for pediatric populations. This leads to manipulation of medications or the need to compound specialized medications, which can be a time-consuming process. Using Semisolid Extrusion (SSE) additive manufacturing (AM), specialized medications can be produced in an expedited process from off-the shelf medication in a hospital or outpatient pharmacy setting.

Toward Biomass-Based Organic Electronics: Continuous Flow Synthesis and Electropolymerization of -Substituted Pyrroles.

Pyrroles are foundational building blocks in a wide array of disciplines, including chemistry, pharmaceuticals, and materials science. Currently sourced from nonrenewable fossil sources, there is a strive to explore alternative and sustainable synthetic pathways to pyrroles utilizing renewable feedstocks. The utilization of biomass resources presents a compelling solution, particularly given that several key bulk and fine chemicals already originate from biomass.

Laser irradiation of photothermal precursors - a novel approach to produce carbon materials for supercapacitors.

A wide array of carbon materials finds extensive utility across various industrial applications today. Nonetheless, the production processes for these materials continue to entail elevated temperatures, necessitate the use of inert atmospheres, and often involve the handling of aggressive and toxic chemicals. The prevalent method for large-scale carbon material production, namely the pyrolysis of waste biomass and polymers, typically unfolds within the temperature range of 500-700 °C under a nitrogen (N) atmosphere.

Direct ink writing of high-resolution cellulose structures.

3D printing is envisioned to play an important role in the production of membranes for e.g., water purification and bio-separation applications due to the prospect of creating new and cleverly designed structures.

Impact of polymer chemistry on critical quality attributes of selective laser sintering 3D printed solid oral dosage forms.

The aim of this study is to investigate the influence of polymer chemistry on the properties of oral dosage forms produced using selective laser sintering (SLS). The dosage forms were printed using different grades of polyvinyl alcohol or copovidone in combination with indomethacin as the active pharmaceutical ingredient. The properties of the printed structures were assessed according to European Pharmacopoeia guidelines at different printing temperatures and laser scanning speeds in order to determine the suitable printing parameters.

Combinatorial 3D printed dosage forms for a two-step and controlled drug release.

Fused deposition modeling (FDM) and selective laser sintering (SLS) are two of the most employed additive manufacturing (AM) techniques within the pharmaceutical research field. Despite the numerous advantages of different AM methods, their respective drawbacks have yet to be fully addressed, and therefore combinatorial systems are starting to emerge. In the present study, hybrid systems comprising SLS inserts and a two-compartment FDM shell are developed to achieve controlled release of the model drug theophylline.

In situ thermal image analysis of selective laser sintering for oral dosage form manufacturing.

Additive Manufacturing (AM) is a fast-growing approach to produce personalized oral dosage forms. Even though some AM technologies are promising as alternative to conventional compounding with resulting dosage manipulation, they still suffer from a lack of quality control. Due to the high regulatory demands and standards applied to dosage forms in the case of dose accuracy and tablet properties such as friability, effective quality control is a key feature in promoting AM as a valid technology for patient-tailored medications.

Selective laser sintering additive manufacturing of dosage forms: Effect of powder formulation and process parameters on the physical properties of printed tablets.

Large batches of placebo and drug-loaded solid dosage forms were successfully fabricated using selective laser sintering (SLS) 3D printing in this study. The tablet batches were prepared using either copovidone (N-vinyl-2-pyrrolidone and vinyl acetate, PVP/VA) or polyvinyl alcohol (PVA) and activated carbon (AC) as radiation absorbent, which was added to improve the sintering of the polymer. The physical properties of the dosage forms were evaluated at different pigment concentrations (i.

Efficacy and Safety of Rituximab for New-Onset Generalized Myasthenia Gravis: The RINOMAX Randomized Clinical Trial.

Importance: Rituximab is a third-line option for refractory generalized myasthenia gravis (MG) based on empirical evidence, but its effect in new-onset disease is unknown.

Objective: To investigate the efficacy and safety of rituximab compared with placebo as an add-on to standard of care for MG.

Design, Setting, And Participants: This randomized, double-blind, placebo-controlled study took place throughout 48 weeks at 7 regional clinics in Sweden.

Towards 3D Bioprinted Spinal Cord Organoids.

Three-dimensional (3D) cultures, so-called organoids, have emerged as an attractive tool for disease modeling and therapeutic innovations. Here, we aim to determine if boundary cap neural crest stem cells (BC) can survive and differentiate in gelatin-based 3D bioprinted bioink scaffolds in order to establish an enabling technology for the fabrication of spinal cord organoids on a chip. BC previously demonstrated the ability to support survival and differentiation of co-implanted or co-cultured cells and supported motor neuron survival in excitotoxically challenged spinal cord slice cultures.

In Vitro Investigation of Thiol-Functionalized Cellulose Nanofibrils as a Chronic Wound Environment Modulator.

There is currently a huge need for new, improved therapeutic approaches for the treatment of chronic wounds. One promising strategy is to develop wound dressings capable of modulating the chronic wound environment (e.g.

Spectroscopic and Physicochemical Characterization of Sulfonated Cladophora Cellulose Beads.

The work presents a full physicochemical characterization of sulfonated cellulose beads prepared from Cladophora nanocellulose intended for use in biological systems. 2,3-Dialdehyde cellulose (DAC) beads were sulfonated, and transformation of up to 50% of the aldehyde groups was achieved, resulting in highly charged and porous materials compared to the compact surface of the DAC beads. The porosity could be tailored by adjusting the degree of sulfonation, and a subsequent reduction of the aldehyde groups to hydroxyl groups maintained the bead structure without considerable alteration of the surface properties.

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries.

Poor cycling stability and safety concerns regarding lithium (Li) metal anodes are two major issues preventing the commercialization of high-energy density Li metal-based batteries. Herein, a novel tri-layer separator design that significantly enhances the cycling stability and safety of Li metal-based batteries is presented. A thin, thermally stable, flexible, and hydrophilic cellulose nanofiber layer, produced using a straightforward paper-making process, is directly laminated on each side of a plasma-treated polyethylene (PE) separator.

Blood Compatibility of Sulfonated Cladophora Nanocellulose Beads.

Sulfonated cellulose beads were prepared by oxidation of nanocellulose to 2,3-dialdehyde cellulose followed by sulfonation using bisulfite. The physicochemical properties of the sulfonated beads, i.e.

Cellulose Nanofibers Prepared via Pretreatment Based on Oxone Oxidation.

Softwood sulfite bleached cellulose pulp was oxidized with Oxone and cellulose nanofibers (CNF) were produced after mechanical treatment with a high-shear homogenizer. UV-vis transmittance of dispersions of oxidized cellulose with different degrees of mechanical treatment was recorded. Scanning electron microscopy (SEM) micrographs and atomic force microscopy (AFM) images of samples prepared from the translucent dispersions showed individualized cellulose nanofibers with a width of about 10 nm and lengths of a few hundred nm.

Preparation of porous 2,3-dialdehyde cellulose beads crosslinked with chitosan and their application in adsorption of Congo red dye.

Micrometer sized 2,3-dialdehyde cellulose (DAC) beads were produced via a recently developed method relying on periodate oxidation of Cladophora nanocellulose. The produced dialdehyde groups and pristine hydroxyl groups provided the DAC beads with a vast potential for further functionalization. The sensitivity of the DAC beads to alkaline conditions, however, limits their possible functionalization and applications.

On the use of ion-crosslinked nanocellulose hydrogels for wound healing solutions: Physicochemical properties and application-oriented biocompatibility studies.

Calcium ion-crosslinked nanofibrillated cellulose (NFC) hydrogels were investigated as potential materials for wound healing dressings. The physicochemical properties of the hydrogels were examined by rheology and water retention tests. Skin cells and monocytes were selected for application-oriented biocompatibility studies.

Preparation of Porous Cellulose Beads via Introduction of Diamine Spacers.

The current work presents a synthesis route based on the reductive amination of 2,3-dialdehyde cellulose beads with diamines to render micrometer-sized beads with increased specific surface area (SSA) and porosity in the mesoporous range. Specifically, the influence of the reductive amination of 2,3-dialdehyde cellulose (DAC) using aliphatic and aromatic tethered mono- and diamines on bead microstructure was investigated. Aliphatic and aromatic tethered monoamines were found to have limited utility for producing porous beads whereas the introduction of diamines provided beads with a porous texture and an SSA increasing from <1 to >30 m(2)/g.

Syllable Repetition vs. Finger Tapping: Aspects of Motor Timing in 100 Healthy Adults.

In this study we systematically compared syllable repetition and finger tapping in healthy adults, and explored possible impacts of tempi, metronome, musical experience, and age on motor timing ability. One hundred healthy adults used finger-tapping and syllable repetition to perform an isochronous pulse in three different tempi, with and without a metronome. Results showed that the motor timing was more accurate with finger tapping than with syllable repetition in the slowest tempo, and the motor timing ability was better with the metronome than without.

Susceptibility of Iα- and Iβ-Dominated Cellulose to TEMPO-Mediated Oxidation.

The susceptibility of Iα- and Iβ-dominated cellulose to TEMPO-mediated oxidation was studied in this work since the cellulose Iα-allomorph is generally considered to be thermodynamically less stable and therefore more reactive than the cellulose Iβ-allomorph. Highly crystalline Cladophora nanocellulose, which is dominated by the Iα-allomorph, was oxidized to various degrees with TEMPO oxidant via bulk electrolysis in the absence of co-oxidants. Further, the Cladophora nanocellulose was thermally annealed in glycerol to produce its Iβ-dominated form and then oxidized.

Urinary 2,5-hexanedione excretion in cryptogenic polyneuropathy compared to the general Swedish population.

Background: 2,5-hexanedione (2,5-HD) is the main neurotoxic metabolite of methyl-n-butyl ketone (MBK) and n-hexane, and known to cause polyneuropathy. The aim of our study was to compare the urinary levels of 2,5-HD between cases with cryptogenic polyneuropathy and the general Swedish population, and to elucidate the role of certain external factors.

Methods: Morning urine samples were collected from 114 cases with cryptogenic polyneuropathy (77 men and 37 women) and 227 referents (110 men and 117 women) randomly selected from the population registry.

A patient with both narcolepsy and multiple sclerosis in association with Pandemrix vaccination.

Narcolepsy with cataplexy is caused by a selective loss of hypocretin-producing neurons, but symptomatic narcolepsy can also result from hypothalamic and brainstem lesions caused by multiple sclerosis (MS). We report a previously healthy man who developed clinical and laboratory verified narcolepsy without having any indication of hypothalamic lesions and MS after vaccination against the influenza H1N1 with Pandemrix. HLA typing showed both DRB1*15:01, associated with MS and DQB1*06:02, associated with narcolepsy.