Long-Range Proton Channels Constructed via Hierarchical Peptide Self-Assembly.

The quest to understand and mimic proton translocation mechanisms in natural channels has driven the development of peptide-based artificial channels facilitating efficient proton transport across nanometric membranes. It is demonstrated here that hierarchical peptide self-assembly can form micrometers-long proton nanochannels. The fourfold symmetrical peptide design leverages intermolecular aromatic interactions to align self-assembled cyclic peptide nanotubes, creating hydrophilic nanochannels between them.

Low-lying LUMO Boosts Conductance in Antiaromatic Dibenzopentalene Versus Aromatic Analogues.

Antiaromaticity is a fundamental concept in chemistry, but the study of molecular wires incorporating antiaromatic units is limited. Despite initial predictions, very few studies show that antiaromaticity has a beneficial effect on electron transport. Dibenzo[a,e]pentalene (DBP) is a stable structure that displays appreciable antiaromaticity within the five-membered rings of the pentalene core.

Efficient Electron Hopping Transport through Azurin-Based Junctions.

We conducted a theoretical study of electron transport through junctions of the blue-copper azurin from . We found that single-site hopping can lead to either higher or lower current values compared to fully coherent transport. This depends on the structural details of the junctions as well as the alignment of the protein orbitals.

A Group-Theoretic Approach to the Origin of Chirality-Induced Spin-Selectivity in Nonmagnetic Molecular Junctions.

Spin-orbit coupling gives rise to a range of spin-charge interconversion phenomena in nonmagnetic systems where certain spatial symmetries are reduced or absent. Chirality-induced spin-selectivity (CISS), a term that generically refers to a spin-dependent electron transfer in nonmagnetic chiral systems, is one such case, appearing in a variety of seemingly unrelated situations ranging from inorganic materials to molecular devices. In particular, the origin of CISS in molecular junctions is a matter of an intense current debate.

Chiral Single-Molecule Potentiometers Based on Stapled ortho- Oligo(phenylene)ethynylenes.

We report on the chemical design of chiral molecular junctions with stress-dependent conductance, whose helicity is maintained during the stretching of a single molecule junction due to the stapling of both ends of the inner helix. In the reported compounds, different conductive pathways are observed, with clearly different conductance values and plateau-length distributions, attributed to different conformations of the helical structures. The large chiro-optical responses and the potential use of these molecules as unimolecular spin filters have been theoretically proved using state-of-the-art Density Functional Theory (DFT) calculations, including a fully ab-initio estimation of the CISS-originating spin polarization which is done, for the first time, for a realistic molecular system.

Experimental Data Confirm Carrier-Cascade Model for Solid-State Conductance across Proteins.

The finding that electronic conductance across ultrathin protein films between metallic electrodes remains nearly constant from room temperature to just a few degrees Kelvin has posed a challenge. We show that a model based on a generalized Landauer formula explains the nearly constant conductance and predicts an Arrhenius-like dependence for low temperatures. A critical aspect of the model is that the relevant activation energy for conductance is either the difference between the HOMO and HOMO-1 or the LUMO+1 and LUMO energies instead of the HOMO-LUMO gap of the proteins.

Adhesion of thin metallic layers on Au surfaces.

We carried out first-principles density-functional theory calculations to study the work of separation for five different metal-metal interfaces, each of them comprising thin layers of selected metals (Cr, W, Ta, Al or Ti) lying on top of Au surfaces. We found that the highest work of separation is obtained for one-atom-thick layers. Increasing the number of atomic layers leads the work of separation to oscillate with the thickness, and ultimately tend to a limiting value for a large number of layers.

Constrained DFT for Molecular Junctions.

We have explored the use of constrained density functional theory (cDFT) for molecular junctions based on benzenediamine. By elongating the junction, we observe that the energy gap between the ionization potential and the electronic affinity increases with the stretching distance. This is consistent with the trend expected from the electrostatic screening.

Single-molecule conductance of dibenzopentalenes: antiaromaticity and quantum interference.

The effects of antiaromaticity and destructive quantum interference (DQI) are investigated on the charge transport through dibenzo-[a,e]pentalene (DBP). 5,10-Connectivity gives high single-molecule conductance whereas 2,7 gives low conductance due to DQI. Comparison of the 5,10-DBP with phenyl and anthracene analogues yields the trend GDBP ≈ GAnth > GPh, despite the aromatic anthracene having a larger HOMO-LUMO gap than 5,10-DBP.

Rational design of an unusual 2D-MOF based on Cu(i) and 4-hydroxypyrimidine-5-carbonitrile as linker with conductive capabilities: a theoretical approach based on high-pressure XRD.

Herein, we present, for the first time, a 2D-MOF based on copper and 4-hydroxypyrimidine-5-carbonitrile as the linker. Each MOF layer is perfectly flat and neutral, as is the case for graphene. High pressure X-ray diffraction measurements reveal that this layered structure can be modulated between 3.

Backbone charge transport in double-stranded DNA.

Understanding charge transport in DNA molecules is a long-standing problem of fundamental importance across disciplines. It is also of great technological interest due to DNA's ability to form versatile and complex programmable structures. Charge transport in DNA-based junctions has been reported using a wide variety of set-ups, but experiments so far have yielded seemingly contradictory results that range from insulating or semiconducting to metallic-like behaviour.

Taming quantum interference in single molecule junctions: induction and resonance are key.

We have joined two fundamental concepts of organic chemistry to provide a deep, yet intuitive, understanding of how side groups influence destructive quantum interference (DQI) in the transport through conjugated molecules. Using density functional theory combined with Green's function techniques, and employing tight-binding models in which all the π-systems are considered, we elucidate the separate roles of bond-resonance and induction in tuning DQI. We show that the position of the anti-resonances produced by DQI is sensitive to the number of side groups, but not in a simple additive way.

Tuning Structure and Dynamics of Blue Copper Azurin Junctions via Single Amino-Acid Mutations.

In the growing field of biomolecular electronics, blue-copper Azurin stands out as one of the most widely studied protein in single-molecule contacts. Interestingly, despite the paramount importance of the structure/dynamics of molecular contacts in their transport properties, these factors remain largely unexplored from the theoretical point of view in the context of single Azurin junctions. Here we address this issue using all-atom Molecular Dynamics (MD) of Pseudomonas Aeruginosa Azurin adsorbed to a Au(111) substrate.

Can One Define the Conductance of Amino Acids?

We studied the electron-transport properties of ten different amino acids and one dimer (di-methionine) using the mechanically controlled break-junction (MCBJ) technique. For methionine and cysteine, additional measurements were performed with the scanning tunneling microscope break-junction (STM-BJ) technique. By means of a statistical clustering technique, we identified several conductance groups for each of the molecules considered.

Mechanical Deformation and Electronic Structure of a Blue Copper Azurin in a Solid-State Junction.

Protein-based electronics is an emerging field which has attracted considerable attention over the past decade. Here, we present a theoretical study of the formation and electronic structure of a metal-protein-metal junction based on the blue-copper azurin from pseudomonas aeruginosa. We focus on the case in which the protein is adsorbed on a gold surface and is contacted, at the opposite side, to an STM (Scanning Tunneling Microscopy) tip by spontaneous attachment.

A Solid-State Protein Junction Serves as a Bias-Induced Current Switch.

A sample-type protein monolayer, that can be a stepping stone to practical devices, can behave as an electrically driven switch. This feat is achieved using a redox protein, cytochrome C (CytC), with its heme shielded from direct contact with the solid-state electrodes. Ab initio DFT calculations, carried out on the CytC-Au structure, show that the coupling of the heme, the origin of the protein frontier orbitals, to the electrodes is sufficiently weak to prevent Fermi level pinning.

Doping hepta-alanine with tryptophan: A theoretical study of its effect on the electrical conductance of peptide-based single-molecule junctions.

Motivated by a recent experiment [C. Guo et al., Proc.

Ab initio electronic structure calculations of entire blue copper azurins.

We present a theoretical study of the blue-copper azurin extracted from Pseudomonas aeruginosa and several of its single amino acid mutants. For the first time, we consider the whole structure of this kind of protein rather than limiting our analysis to the copper complex only. This is accomplished by combining fully ab initio calculations based on density functional theory with atomic-scale molecular dynamics simulations.

Electron Transport Through Homopeptides: Are They Really Good Conductors?

Motivated by recent experiments, we performed a theoretical study of electron transport through single-molecule junctions incorporating four kinds of homopeptides (based on alanine, glutamic acid, lysine, and tryptophan). Our results suggest that these molecules are rather insulating and operate in off-resonance tunneling as their main transport mechanism. We ascribe their poor performance as conductors to the high localization of their frontier orbitals.

Peltier cooling in molecular junctions.

The study of thermoelectricity in molecular junctions is of fundamental interest for the development of various technologies including cooling (refrigeration) and heat-to-electricity conversion . Recent experimental progress in probing the thermopower (Seebeck effect) of molecular junctions has enabled studies of the relationship between thermoelectricity and molecular structure . However, observations of Peltier cooling in molecular junctions-a critical step for establishing molecular-based refrigeration-have remained inaccessible.

Bioengineering a Single-Protein Junction.

Bioelectronics moves toward designing nanoscale electronic platforms that allow in vivo determinations. Such devices require interfacing complex biomolecular moieties as the sensing units to an electronic platform for signal transduction. Inevitably, a systematic design goes through a bottom-up understanding of the structurally related electrical signatures of the biomolecular circuit, which will ultimately lead us to tailor its electrical properties.

Toward Multiple Conductance Pathways with Heterocycle-Based Oligo(phenyleneethynylene) Derivatives.

In this paper, we have systematically studied how the replacement of a benzene ring by a heterocyclic compound in oligo(phenyleneethynylene) (OPE) derivatives affects the conductance of a molecular wire using the scanning tunneling microscope-based break junction technique. We describe for the first time how OPE derivatives with a central pyrimidine ring can efficiently link to the gold electrode by two pathways presenting two different conductance G values. We have demonstrated that this effect is associated with the presence of two efficient conductive pathways of different length: the conventional end-to-end configuration, and another with one of the electrodes linked directly to the central ring.

Single-molecule conductance of a chemically modified, π-extended tetrathiafulvalene and its charge-transfer complex with F4TCNQ.

We describe the synthesis and single-molecule electrical transport properties of a molecular wire containing a π-extended tetrathiafulvalene (exTTF) group and its charge-transfer complex with F4TCNQ. We form single-molecule junctions using the in situ break junction technique using a homebuilt scanning tunneling microscope with a range of conductance between 10 G0 down to 10(-7) G0. Within this range we do not observe a clear conductance signature of the neutral parent molecule, suggesting either that its conductance is too low or that it does not form a stable junction.

Heat dissipation in atomic-scale junctions.

Atomic and single-molecule junctions represent the ultimate limit to the miniaturization of electrical circuits. They are also ideal platforms for testing quantum transport theories that are required to describe charge and energy transfer in novel functional nanometre-scale devices. Recent work has successfully probed electric and thermoelectric phenomena in atomic-scale junctions.

A molecular platinum cluster junction: a single-molecule switch.

We present a theoretical study of electron transport through single-molecule junctions incorporating a Pt(6) metal cluster bound within an organic framework. The insertion of this molecule between a pair of electrodes leads to a fully atomically engineered nanometallic device with high conductance at the Fermi level and two sequential high on/off switching states. The origin of this property can be traced back to the existence of a degenerate HOMO consisting of two asymmetric orbitals with energies close to the Fermi level of the metal leads.