Comparative analysis of myoelectric activity and mandibular movement in healthy and nonpainful articular temporomandibular disorder subjects.

Objectives: Temporomandibular disorders (TMDs) are one of the leading causes of craniofacial pain, and a high incidence of TMDs in young adults has been reported. Previous studies have used surface electromyography (sEMG) and mandibular kinematic analysis for TMDs diagnosis. This study aimed to provide normal reference values of sEMG and mandibular kinematics in Han Chinese adults, compare the sex differences and assess their diagnosis value on pain-free articular TMDs.

Higher water content observed in smaller size fraction of Chang'e-5 lunar regolith samples.

Water has been detected in lunar regolith, with multiple sources identified through the analysis of individual grains. However, the primary origin of water in the bulk lunar regolith remains uncertain. This study presents spectroscopic analyses of water content in sealed Chang'e-5 samples.

Return to the Moon: New perspectives on lunar exploration.

Lunar exploration is deemed crucial for uncovering the origins of the Earth-Moon system and is the first step for advancing humanity's exploration of deep space. Over the past decade, the Chinese Lunar Exploration Program (CLEP), also known as the Chang'e (CE) Project, has achieved remarkable milestones. It has successfully developed and demonstrated the engineering capability required to reach and return from the lunar surface.

Event-Triggered Distributed Fusion Estimator for Asynchronous Markov Jump Systems with Correlated Noises and Fading Measurements.

In this study, we investigate event-triggered distributed fusion estimation for asynchronous Markov jump systems subject to correlated noises and fading measurements. The measurement noises are interrelated, and they are simultaneously coupled with the system noise. The sensor samples measurements uniformly, and the sampling rates of the sensors are different.

analysis of surface composition and meteorology at the Zhurong landing site on Mars.

The Zhurong rover of the Tianwen-1 mission landed in southern Utopia Planitia, providing a unique window into the evolutionary history of the Martian lowlands. During its first 110 sols, Zhurong investigated and categorized surface targets into igneous rocks, lithified duricrusts, cemented duricrusts, soils and sands. The lithified duricrusts, analysed by using laser-induced breakdown spectroscopy onboard Zhurong, show elevated water contents and distinct compositions from those of igneous rocks.

Intranasally administered thermosensitive gel for brain-targeted delivery of rhynchophylline to treat Parkinson's disease.

The aim of this study is to overcome the obstacle of the blood-brain barrier (BBB) in therapeutic drugs of Parkinson's disease (PD), like rhynchophylline (RIN) entry by intranasal administration and to solve the problem of short residence time of drugs in the nasal cavity by the dosage form design of thermosensitive gel. We first conducted a study of the screening of absorption enhancers and 3% hydroxypropyl-β-cyclodextrin (HP-β-CD) was effective to improve the nasal mucosal permeability of RIN. By adjusting the ratio of different components in order to make the gel with adhesion and rapid gelation which were determined to be Poloxamer 407 (P407) 20%, Poloxamer 188 (P188) 1%, polyethylene glycol 6000 (PEG-6000) 1% and HP-β-CD 3%.

A novel visible light-curing chitosan-based hydrogel membrane for guided tissue regeneration.

Inflammation and trauma destroy the tooth-supporting tissue, leading to the loss of oral function and the difficulty of denture restoration. Guided tissue regeneration (GTR) is a technique based on a barrier membrane designed to restrict soft tissue invasion and maintain the space for bone regeneration. This study examined a new formulation to prepare methacrylated carboxymethyl chitosan (CMCS-MA) hydrogel as a barrier membrane that could be crosslinked under visible-light irradiation.

Comparative analysis of leaching residual monomer and biological effects of four types of conventional and CAD/CAM dental polymers: an in vitro study.

Objectives: The objective of this study is to investigate leaching residual monomer and biological effects of four types of conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) dental polymers on human gingival fibroblasts (HGFs).

Materials And Methods: A total of 540 disk-shaped specimens were fabricated from four different materials (n=135 per group): compression-molding polymethylmethacrylate (PMMA) (conventional denture polymer), CAD/CAM PMMA (CAD/CAM denture polymer), bis-acrylic composite resin (conventional temporary polymer), and CAD/CAM PMMA (CAD/CAM temporary polymer). Specimens were eluted in cell culture medium for 72 h at 37°C, and the residual monomer in eluates subsequently was measured by high-performance liquid chromatography (HPLC).

In situ detection of water on the Moon by the Chang'E-5 lander.

We report analysis results of the reflectance spectra (0.48 to 3.2 μm) acquired by the Chang’E-5 lander, which provides vital context of the returned samples from the Northern Oceanus Procellarum of the Moon.

Non-KREEP origin for Chang'e-5 basalts in the Procellarum KREEP Terrane.

Mare volcanics on the Moon are the key record of thermo-chemical evolution throughout most of lunar history. Young mare basalts-mainly distributed in a region rich in potassium, rare-earth elements and phosphorus (KREEP) in Oceanus Procellarum, called the Procellarum KREEP Terrane (PKT)-were thought to be formed from KREEP-rich sources at depth. However, this hypothesis has not been tested with young basalts from the PKT.

Minimum Radiant Exposure and Irradiance for Triggering Adequate Polymerization of a Photo-Polymerized Resin Cement.

This study aimed to establish the minimum radiant exposure and irradiance to trigger an adequate polymerization of a photo-polymerized resin cement. In total, 220 disc-shaped specimens (diameter of 10 mm and thickness of 0.1 mm) were fabricated using a photo-polymerized resin cement (Variolink N-transparent, Ivoclar Vivadent).

The apoptotic and autophagic effects of cast Au-Pt, and differently manufactured Co-Cr and cp-Ti on three-dimensional oral mucosal model.

The application of digitally manufactured dental metals has aroused the attention on their biocompatibilities. Three-dimensional oral mucosal model (3D OMM) would provide excellent assessments to the biocompatibility. In the current study, we set to measure metal ion release levels in the extracts of cast gold-platinum alloy (Au-Pt), differently manufactured cobalt-chromium alloy (Co-Cr) and commercially pure titanium (cp-Ti).

[A review of models of forest fire occurrence prediction in China].

We summarized research progress of forest fire occurrence prediction model in China based on the literature review, from the prospects of forest fire drivers, models of forest fire occurrence probability, models of forest fire occurrence frequency and model validation methods. The main conclusions are: 1) Meteorology, terrain, vegetation, fuel and human activities were the main driving factors of forest fire occurrence and model prediction accuracy. 2) In the models of forest fire occurrence probability, the geographically weighted logistic regression model considered the spatial correlation between model variables, the Gompit regression model could fit the asymmetric structure fire data.

[Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics].

Purpose: To study the optical properties of two common dental light curing units and the optical properties of the transmitted light after transmitting glass ceramics.

Methods: Two types of glass-ceramic disc named IPS e.max CAD and IPS Empress CAD were produced by CAD/CAM technology, and the colors of A2 and A3 were chosen for each type of glass ceramic, then divided into 4 groups.

Olivine-norite rock detected by the lunar rover Yutu-2 likely crystallized from the SPA-impact melt pool.

Chang'E-4 landed in the South Pole-Aitken (SPA) basin, providing a unique chance to probe the composition of the lunar interior. Its landing site is located on ejecta strips in Von Kármán crater that possibly originate from the neighboring Finsen crater. A surface rock and the lunar regolith at 10 sites along the rover Yutu-2 track were measured by the onboard Visible and Near-Infrared Imaging Spectrometer in the first three lunar days of mission operations.

The Influence of Recycling on the Properties of Interface between Ceramic and Dental Alloys.

Purpose: The purpose of this study was to evaluate the effect of recycling on the properties of interface between 2 dental alloys and their corresponding porcelains.

Materials And Methods: Noble alloy (Pd-Cu-Ga) and high-noble alloy (Au-Pt) were used in this study. Metal matrices (cylinders 4 mm × 4 mm with pedestal 5 mm × 1 mm) were prepared by arc melting in argon after recasting 1-3 times.

Removal of dental alloys and titanium attenuates trace metals and biological effects on liver and kidney.

To determine whether the potential effects on liver and kidney caused by dental alloys could be reduced or terminated by the removal of nickel-chromium (Ni-Cr) alloy, cobalt-chromium (Co-Cr) alloy, and commercially pure titanium (CP-Ti), they were placed in the cheek pouches of Syrian hamsters according to ISO 10993-10. Then, the peak/plateau and end times of trace metals in the blood were determined with or without the removal of the dental alloys. Based on these time points, the trace metals and their effects on liver and kidney were examined.

[Cytocompatibility of Co-Cr ceramic alloys after recasting].

Purpose: To evaluate the cytocompatibility of Co-Cr ceramic alloys after recasting.

Methods: Cobalt-chromium (Co-Cr) ceramic alloys were recasted for 1-3 times. Samples of Co-Cr ceramic alloys were immersed in DMEM culture medium.