A chiral monolith stationary phase was fabricated by modifying the monolith surface using L-cysteine through a thiol-epoxy click reaction. L-cysteine-bonded polymer monolith was characterized by scanning electron microscopy/energy-dispersive X-ray and attenuated total reflectance Fourier-transformed infrared. The monomer content and modification temperature were carefully optimized to create a polymer monolith with excellent mechanical stability and permeability.
View Article and Find Full Text PDFCorrection for 'Development of a novel X-ray fluorescence instrument equipped with a noble gas filter' by Tsugufumi Matsuyama , , 2024, https://doi.org/10.1039/d4an00122b.
View Article and Find Full Text PDFPolyaniline composites consisting of carboxymethyl cellulose (CMC) have enhanced adsorption properties, but recent studies indicate that the oxidised species - dialdehyde carboxymethyl cellulose (DCMC) - outperforms CMC-based composites. However, these studies fail to study the effect of DCMC's aldehyde content and compare the composites with CMC-based composites; numerous experiments required to investigate each adsorbent for each factor limit such studies. We explored a way to study whether villi-structured polyaniline (VSPANI), its CMC composite (CMC/PANI), and its DCMC composites with 35% (DCMC(A)/PANI) and 77% (DCMC(B)/PANI) aldehyde content would be great adsorbents for removing bisphenol-A (BPA).
View Article and Find Full Text PDFBiochem Biophys Res Commun
February 2024
Exosomes are small extracellular vesicles (EVs) found in culture supernatants, blood, and breast milk. The size of these nanocomplexes limits the methods of EV analyses. In this study, nitrobenzoxadiazole (NBD), a fluorophore, conjugated endosome-lysosome imager, GIF-2250 and its derivative, GIF-2276, were evaluated for exosome analyses.
View Article and Find Full Text PDFThis article describes the fabrication of porous nicotinic acid-functionalized chito-oligosaccharide-bonded titania/silica hybrid monoliths (TiO/SiO@ChO-N) through a co-gelation sol-gel process. A capillary monolith with a well-defined and homogeneous structure was obtained by controlling the hydrolysis speed of titanium alkoxides in a sol mixture by using glycerol and acetylacetone. As a result of the functionalization with chito-oligosaccharides (ChO)-modified nicotinic acid, the obtained stationary phase provides superior physiochemical properties, such as a cationic hydrophilic surface, porosity, and mechanical strength.
View Article and Find Full Text PDFMagnetic mesoporous silica (MMS) was synthesized in a one-pot system using various alkanolamines (triethanolamine, diethanolamine, tris (hydroxymethyl)aminomethane) as a basic catalyst. The characterization of the composites was conducted using scanning electron microscope, transmission electron microscope, X-ray diffractometer, surface area analyzer, and X-ray photoelectros spectroscopy. The MMS synthesized with tris(hydroxymethyl)aminomethane (MMS) showed the highest specific surface area, pore volume, and average pore diameter.
View Article and Find Full Text PDFA fast and simple ion chromatographic method for the determination of iodide in seawater is reported using poly(ethylene glycol) methyl ether methacrylate-bonded stationary phase. Poly(ethylene glycol) methyl ether methacrylate was reacted with primary amino groups of aminopropylsilica in N,N-dimethylformamide at 80°C. The prepared stationary phases were evaluated by analyzing several inorganic anions and the retention behavior was observed.
View Article and Find Full Text PDFIn this study, a monolithic organic polymer stationary phase was modified using 18-crown-6-ether for use in capillary ion chromatography. Its use in the separation of inorganic anions was investigated. The monolithic stationary phase was obtained by chemically bonding 2-aminomethyl-18-crown-6-ether to a polymer skeleton comprising glycidyl methacrylate and ethylene glycol dimethacrylate.
View Article and Find Full Text PDFZwitterionic monolithic columns were synthesized by a one-pot reaction using [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide, ethylene dimethacrylate, methanol and 2,2'-azobis(isobutyronitrile) as the monomer, cross-linker, porogen and initiator, respectively. The optimum conditions for polymerization and the efficiency of the prepared columns were examined for ion chromatography. The separation of five kinds of inorganic anions was achieved.
View Article and Find Full Text PDFThe retention behavior of inorganic anions was studied in hydrophilic interaction chromatography (HILIC). In this study, five kinds of HILIC stationary phases (amino, imidazole, amide, pyridine and zwitterionic) were investigated. It was found that only amino and imidazole columns exhibited the separation of inorganic anions under HILIC conditions.
View Article and Find Full Text PDFA hybrid monolithic column with sulfonate functionality was successfully prepared for the simultaneous separation of common inorganic cations in ion-exchange chromatographic mode through a simple and easy single-step preparation method. The strong cation-exchange moieties were provided directly from allylsulfonate, which worked as an organic monomer in the single-step reaction. Inorganic cations (Li(+), Na(+), K(+), NH4(+), Cs(+), Rb(+), Mg(2+), Ca(2+), and Sr(2+)) were separated satisfactorily by using CuSO4 as the eluent with indirect UV detection.
View Article and Find Full Text PDFA polyethylene glycol (PEG) monolithic column was successfully prepared in situ for the separation of inorganic anions in ion exchange capillary chromatography. By attaching PEG-groups into the methacrylate-based polymer, the number of theoretical plates was improved from 1433 to 3346 plates/m (when nitrate was used as the analyte). The retention behavior of iodate, bromate, nitrite, bromide and nitrate was observed under various salt aqueous solutions.
View Article and Find Full Text PDFThe influences of column hardware, such as chromatographic tubes and frits, on liquid chromatography-mass spectrometry (LC-MS) analysis of phosphorylated compounds were evaluated. The signal to noise ratio (S/N) and the intensity of flavin adenine dinucleotide (FAD) using a glass lined tube and polyethylene frit (GL-PE) column was approximately 170 and 90 times higher, respectively, than those using conventional stainless steel tube and stainless steel frit (S-S) column. In addition, the retention time of FAD using GL-PE column was the shortest compared to other columns.
View Article and Find Full Text PDFColumns made of three different materials were evaluated with regard to the carryover of phosphorylated peptides and fumonisins in liquid chromatography/tandem mass spectrometry (LC/MS/MS). In order to eliminate carryover caused by the injection operation in the autosampler, the column carryover was calculated using the duplicated solvent gradient method. A column made of a glass-lined stainless-steel tube and polyethylene frits (GL-PE column) yielded the most significant improvements in the peak shape and the carryover as compared to the other columns.
View Article and Find Full Text PDFFingerprint analysis using capillary liquid chromatography (CLC) has been developed for discrimination of Zingiber montanum (ZM) from related species, for example Z. americans (ZA) and Z. zerumbet (ZZ).
View Article and Find Full Text PDFA monolithic capillary column prepared with glycidyl methacrylate (GMA) and poly(ethylene glycol) dimethacrylate (PEGDMA) was investigated and used in capillary liquid chromatography. The polymer monolith was synthesized in the presence of methanol and decanol as the biporogenic solvents by in situ polymerization of GMA and PEGDMA, and the optimum composition of monomer and porogen was investigated. After polymerization, glycidyl groups were hydrolyzed with sulfuric acid to produce diol groups at the surface of the porous monolith via epoxy-ring-opening.
View Article and Find Full Text PDFA tosylated-poly(ethylene oxide) (PEO) reagent was reacted with primary amino groups of an aminopropylsilica packing material (TSKgel NH2-60) in acetonitrile to form PEO-bonded stationary phase. The reaction was a single and simple step reaction. The prepared stationary phase was able to separate inorganic anions.
View Article and Find Full Text PDFInorganic anions were separated on a chemically bonded 18-crown-6 ether (18C6E) stationary phase in capillary ion chromatography. In this study 18C6E groups were chemically bonded on silica gel via reaction with 3-glycidyloxypropyltrimethoxysilane, followed by reaction with 2-aminomethyl-18C6E. Analyte anions were separated in the ion-exchange mode based on the fact that the eluent cation was trapped on the 18C6E and it worked as the anion-exchange site.
View Article and Find Full Text PDFA novel and simple capillary ion chromatographic method for the determination of iodide is reported. Separation was achieved on a laboratory-made packed capillary column (100 mm × 0.32 mm i.
View Article and Find Full Text PDFA new method using reversed phase capillary liquid chromatography was developed for simultaneous determination of four bioactive compounds found in ginger (Zingiber officinale) namely, 6-, 8-, 10-gingerol, and 6-shogaol. The separation of these four compounds was performed using C30 as the stationary phase and 60% acetonitrile as the mobile phase in isocratic elution mode with a flow rate of 5 μL/min. All four compounds were separated within 25 min with good resolution.
View Article and Find Full Text PDFA non-suppressed capillary ion chromatographic method with a laboratory-made packed cation-exchange column (100 mm × 0.32 mm i.d.
View Article and Find Full Text PDFThe present article reviews the use of polyethylene glycol (PEG) or polyoxyethylene (POE) as the stationary phase for the separation of inorganic anions in ion chromatography and discusses about the retention mechanisms involved in the separation of anions on the novel stationary phases. PEG permanently coated on a hydrophobic stationary phase retained anions in the partition mode and allowed us to use high-concentration eluents because the retention of anions increased with increasing eluent concentration for most of the eluents. This situation was convenient to determine trace anions contained in seawater samples without any disturbance due to matrices.
View Article and Find Full Text PDFA separation system for gold nanoparticles was developed using monolithic silica capillary columns with 50 µm i.d., which were prepared via in-situ sol-gel processes.
View Article and Find Full Text PDFA vitamin U-bonded stationary phase was prepared and the retention behavior of inorganic anions was examined using ion chromatography. Inorganic anions were retained on the vitamin U-bonded stationary phase under acidic as well as neutral eluent conditions in the ion-exchange mode. The elution order of the examined anions under neutral eluent conditions was nearly the same as that observed in common ion exchange mode, while the elution order observed under acidic eluent conditions was completely different from that observed in common ion exchange mode.
View Article and Find Full Text PDF