Nanomaterials in 4D Printing: Expanding the Frontiers of Advanced Manufacturing.

As an innovative technology, four-dimentional (4D) printing is built upon the principles of three-dimentional (3D) printing with an additional dimension: time. While traditional 3D printing creates static objects, 4D printing generates "responsive 3D printed structures", enabling them to transform or self-assemble in response to external stimuli. Due to the dynamic nature, 4D printing has demonstrated tremendous potential in a range of industries, encompassing aerospace, healthcare, and intelligent devices.

4D Printed Nerve Conduit with Neurogenic Guidance for Nerve Regeneration.

Nerve repair poses a significant challenge in the field of tissue regeneration. As a bioengineered therapeutic method, nerve conduits have been developed to address damaged nerve repair. However, despite their remarkable potential, it is still challenging to encompass complex physiologically microenvironmental cues (both biophysical and biochemical factors) to synergistically regulate stem cell differentiation within the implanted nerve conduits, especially in a facile manner.

3D printing of thick myocardial tissue constructs with anisotropic myofibers and perfusable vascular channels.

Engineering of myocardial tissues has become a promising therapeutic strategy for treating myocardial infarction (MI). However, a significant challenge remains in generating clinically relevant myocardial tissues that possess native microstructural characteristics and fulfill the requirements for implantation within the human body. In this study, a thick 3D myocardial construct with anisotropic myofibers and perfusable branched vascular channels is created with clinically relevant dimensions using a customized beam-scanning stereolithography printing technique.

Chitosan and its derivatives in 3D/4D (bio) printing for tissue engineering and drug delivery applications.

Tissue engineering research has undergone to a revolutionary improvement, thanks to technological advancements, such as the introduction of bioprinting technologies. The ability to develop suitable customized biomaterial inks/bioinks, with excellent printability and ability to promote cell proliferation and function, has a deep impact on such improvements. In this context, printing inks based on chitosan and its derivatives have been instrumental.

4D Thermo-Responsive Smart hiPSC-CM Cardiac Construct for Myocardial Cell Therapy.

Purpose: 4D fabrication techniques have been utilized for advanced biomedical therapeutics due to their ability to create dynamic constructs that can transform into desired shapes on demand. The internal structure of the human cardiovascular system is complex, where the contracting heart has a highly curved surface that changes shape with the heart's dynamic beating motion. Hence, 4D architectures that adjust their shapes as required are a good candidate to readily deliver cardiac cells into the damaged heart and/or to serve as self-morphing tissue scaffolds/patches for healing cardiac diseases.

3D printed biomimetic flexible blood vessels with iPS cell-laden hierarchical multilayers.

Successful recovery from vascular diseases has typically relied on the surgical repair of damaged blood vessels (BVs), with the majority of current approaches involving the implantation of autologous BVs, which is plagued by donor site tissue damage. Researchers have attempted to develop artificial vessels as an alternative solution to traditional approaches to BV repair. However, the manufacturing of small-diameter (< 6 mm) BVs is still considered one of the biggest challenges due to its difficulty in the precise fabrication and the replication of biomimetic architectures.

An in vitro analysis of the effect of geometry-induced flows on endothelial cell behavior in 3D printed small-diameter blood vessels.

Clinical recovery from vascular diseases has increasingly become reliant upon the successful fabrication of artificial blood vessels (BVs) or vascular prostheses due to the shortage of autologous vessels and the high incidence of vessel graft diseases. Even though many attempts at the clinical implementation of large artificial BVs have been reported to be successful, the development of small-diameter BVs remains one of the significant challenges due to the limitation of micro-manufacturing capacity in complexity and reproducibility, as well as the development of thrombosis. The present study aims to develop 3D printed small-diameter artificial BVs that recapitulate the longitudinal geometric elements in the native BVs using biocompatible polylactic acid (PLA).

Emerging 4D Printing Strategies for Next-Generation Tissue Regeneration and Medical Devices.

The rapid development of 3D printing has led to considerable progress in the field of biomedical engineering. Notably, 4D printing provides a potential strategy to achieve a time-dependent physical change within tissue scaffolds or replicate the dynamic biological behaviors of native tissues for smart tissue regeneration and the fabrication of medical devices. The fabricated stimulus-responsive structures can offer dynamic, reprogrammable deformation or actuation to mimic complex physical, biochemical, and mechanical processes of native tissues.

4D printing in biomedical applications: emerging trends and technologies.

Nature's material systems during evolution have developed the ability to respond and adapt to environmental stimuli through the generation of complex structures capable of varying their functions across direction, distances and time. 3D printing technologies can recapitulate structural motifs present in natural materials, and efforts are currently being made on the technological side to improve printing resolution, shape fidelity, and printing speed. However, an intrinsic limitation of this technology is that printed objects are static and thus inadequate to dynamically reshape when subjected to external stimuli.

Acoustic Droplet Vaporization of Perfluorocarbon Droplets in 3D-Printable Gelatin Methacrylate Scaffolds.

Scientists face a significant challenge in creating effective biomimetic constructs in tissue engineering with sustained and controlled delivery of growth factors. Recently, the addition of phase-shift droplets inside the scaffolds is being explored for temporal and spatial control of biologic delivery through vaporization using external ultrasound stimulation. Here, we explore acoustic droplet vaporization (ADV) in gelatin methacrylate (GelMA), a popular hydrogel used for tissue engineering applications because of its biocompatibility, tunable mechanical properties and rapid reproducibility.

Recent advances in bioprinting technologies for engineering cardiac tissue.

Annually increasing incidence of cardiac-related disorders and cardiac tissue's minimal regenerative capacity have motivated the researchers to explore effective therapeutic strategies. In the recent years, bioprinting technologies have witnessed a great wave of enthusiasm and have undergone steady advancements over a short period, opening the possibilities for recreating engineered functional cardiac tissue models for regenerative and diagnostic applications. With this perspective, the current review delineates recent developments in the sphere of engineered cardiac tissue fabrication, using traditional and advanced bioprinting strategies.

Recent advances in bioprinting technologies for engineering hepatic tissue.

In the sphere of liver tissue engineering (LTE), 3D bioprinting has emerged as an effective technology to mimic the complex in vivo hepatic microenvironment, enabling the development of functional 3D constructs with potential application in the healthcare and diagnostic sector. This review gears off with a note on the liver's microscopic 3D architecture and pathologies linked to liver injury. The write-up is then directed towards unmasking recent advancements and prospects of bioprinting for recapitulating 3D hepatic structure and function.

3D printing novel in vitro cancer cell culture model systems for lung cancer stem cell study.

Two-dimensional (2D) in vitro cell cultures and laboratory animals have been used traditionally as the gold-standard preclinical cancer model systems. However, for cancer stem cell (CSC) studies, they exhibit notable limitations on simulating native environment, which depreciate their translatability for clinical development purposes. In this study, different three-dimensional (3D) printing platforms were used to establish novel 3D cell cultures enriched in CSCs from non-small cell lung cancer (NSCLC) patients and cell lines.

Dual 3D printing for vascularized bone tissue regeneration.

The development of sufficient vascular networks is crucial for the successful fabrication of tissue constructs for regenerative medicine, as vascularization is essential to perform the metabolic functions of tissues, such as nutrient transportation and waste removal. In recent years, efforts to 3D print vascularized bone have gained substantial attention, as bone disorders and defects have a marked impact on the older generations of society. However, conventional and previous 3D printed bone studies have been plagued by the difficulty in obtaining the nanoscale geometrical precision necessary to recapitulate the distinct characteristics of natural bone.

4D Printed Cardiac Construct with Aligned Myofibers and Adjustable Curvature for Myocardial Regeneration.

As an innovative additive manufacturing process, 4D printing can be utilized to generate predesigned, self-assembly structures which can actuate time-dependent, and dynamic shape-changes. Compared to other manufacturing techniques used for tissue engineering purposes, 4D printing has the advantage of being able to fabricate reprogrammable dynamic tissue constructs that can promote uniform cellular growth and distribution. For this study, a digital light processing (DLP)-based printing technique was developed to fabricate 4D near-infrared (NIR) light-sensitive cardiac constructs with highly aligned microstructure and adjustable curvature.

3D Bioprinting-Tunable Small-Diameter Blood Vessels with Biomimetic Biphasic Cell Layers.

Blood vessel damage resulting from trauma or diseases presents a serious risk of morbidity and mortality. Although synthetic vascular grafts have been successfully commercialized for clinical use, they are currently only readily available for large-diameter vessels (>6 mm). Small-diameter vessel (<6 mm) replacements, however, still present significant clinical challenges worldwide.

4D physiologically adaptable cardiac patch: A 4-month in vivo study for the treatment of myocardial infarction.

There has been considerable progress in engineering cardiac scaffolds for the treatment of myocardial infarction (MI). However, it is still challenging to replicate the structural specificity and variability of cardiac tissues using traditional bioengineering approaches. In this study, a four-dimensional (4D) cardiac patch with physiological adaptability has been printed by beam-scanning stereolithography.

Three-Dimensional Printing Biologically Inspired DNA-Based Gradient Scaffolds for Cartilage Tissue Regeneration.

Cartilage damage caused by aging, repeated overloading, trauma, and diseases can result in chronic pain, inflammation, stiffness, and even disability. Unlike other types of tissues (bone, skin, muscle, etc.), cartilage tissue has an extremely weak regenerative capacity.

Inhibition of Human Breast Cancer Cell Proliferation by Low-Intensity Ultrasound Stimulation.

Objectives: Cancer is characterized by uncontrolled cell proliferation, which makes novel therapies highly desired. In this study, the effects of near-field low-intensity pulsed ultrasound (LIPUS) stimulation on T47D human breast cancer cell and healthy immortalized MCF-12A breast epithelial cell proliferation were investigated in monolayer cultures.

Methods: A customized ultrasound (US) exposure setup was used for the variation of key US parameters: intensity, excitation duration, and duty cycle.

Integrating cold atmospheric plasma with 3D printed bioactive nanocomposite scaffold for cartilage regeneration.

The progressive degeneration of articular cartilage or osteoarthritis of the knee is a serious clinical problem affecting patient quality of life. In recent years, artificially engineered cartilage scaffolds have been widely studied as a promising method to stimulate cartilage regeneration. In this study, a novel biomimetic cartilage scaffold was developed by integrating a cold atmospheric plasma (CAP) treatment with prolonged release of bioactive factors.

Three-Dimensional Printing: A Catalyst for a Changing Orthopaedic Landscape.

Three-dimensional (3D) printing is an emerging tool in provider and patient education, surgical planning, and the design and implementation of medical devices and implants. Recent decreases in the cost of 3D printers along with advances in and cost reduction of printable materials have elevated 3D printing within the medical device industry. The advantages of 3D printing over traditional means of implant manufacturing lie in its ability to use a wide array of materials, its fine control of the macro- and microarchitecture, and its unprecedented customizability.

4D Self-Morphing Culture Substrate for Modulating Cell Differentiation.

As the most versatile and promising cell source, stem cells have been studied in regenerative medicine for two decades. Currently available culturing techniques utilize a 2D or 3D microenvironment for supporting the growth and proliferation of stem cells. However, these culture systems fail to fully reflect the supportive biological environment in which stem cells reside in vivo, which contain dynamic biophysical growth cues.

Touch-Spun Nanofibers for Nerve Regeneration.

In the current study, we examined the potential for neural stem cell (NSCs) proliferation on novel aligned touch-spun polycaprolactone (PCL) nanofibers. Electrospun PCL nanofibers with similar diameter and alignment were used as a control. Confocal microscopy images showed that NSCs grew and differentiated all over the scaffolds up to 8 days.

Engineering a Novel 3D Printed Vascularized Tissue Model for Investigating Breast Cancer Metastasis to Bone.

Cancer metastases are a challenge for cancer treatment due to their organ specificity and pathophysiological complexity. Engineering 3D in vitro models capable of replicating native cancer dissemination can significantly improve the understanding of cancer biology and can help to guide the development of more effective treatments. In order to better mimic the behavior of native cancer, a triculture metastatic model is created using a stereolithography printing technique with optimized inks for investigating the invasion of breast cancer (BrCa) cells into vascularized bone tissue.

In vitro and in vivo evaluation of 3D bioprinted small-diameter vasculature with smooth muscle and endothelium.

The ability to fabricate perfusable, small-diameter vasculature is a foundational step toward generating human tissues/organs for clinical applications. Currently, it is highly challenging to generate vasculature integrated with smooth muscle and endothelium that replicates the complexity and functionality of natural vessels. Here, a novel method for directly printing self-standing, small-diameter vasculature with smooth muscle and endothelium is presented through combining tailored mussel-inspired bioink and unique 'fugitive-migration' tactics, and its effectiveness and advantages over other methods (i.