Mixed-charge hyperbranched polymer nanoparticles with selective antibacterial action for fighting antimicrobial resistance.

The escalating menace of antimicrobial resistance (AMR) presents a profound global threat to life and assets. However, the incapacity of metal ions/reactive oxygen species (ROS) or the indiscriminate intrinsic interaction of cationic groups to distinguish between bacteria and mammalian cells undermines the essential selectivity required in these nanomaterials for an ideal antimicrobial agent. Hence, we devised and synthesized a range of biocompatible mixed-charge hyperbranched polymer nanoparticles (MCHPNs) incorporating cationic, anionic, and neutral alkyl groups to effectively combat multidrug-resistant bacteria and mitigate AMR.

Reversibly Cross-Linked Isoporous Membranes Fabricated by the Recyclable Block Copolymer with Pendent Dithiolane Groups.

The reversible formation and cleavage of disulfide bonds under physical/chemical stimuli make it a valuable motif in constructing dynamically cross-linked materials. In the present work, the block copolymer bearing pendent dithiolanes was synthesized and fabricated into isoporous membranes by the combination of self-assembly and nonsolvent-induced phase separation strategy. The cross-linking within the membrane was realized by the thiol-initiated ring-opening cascades of cyclic disulfides.

Influence of the linkage between long alkyl tails and cationic groups on membrane activity of nano-sized hyperbranched polyquaterniums.

The recurrent emergence of serious pathogens necessitates novel insights and highly efficient antibacterial agents. However, the innate inability of metal ions and reactive oxygen species (ROS) to differentiate between bacteria and mammalian cells presents a challenge, limiting the selectivity crucial for an ideal antimicrobial solution. Herein, we present a systematic exploration involving two variants of nano-sized hyperbranched polyquaterniums (NHBPQs) - one featuring a lengthy alkyl tail linked to the ammonium unit at the N-atom center (NHBPQ-A), and the other in a segregated configuration (NHBPQ-B).

Lysine-Sarcosine PiPo Functionalized Surface with Excellent Hemocompatibility.

Polysarcosine (PSar) is an electrically neutral and excellently hydrophilic polypeptoid showing limited interaction with proteins and cells, which possesses better biocompatibility compared with polyethylene glycol. However, the immobilization of PSar is difficult due to the high water solubility. Herein, lysine-sarcosine PiPo, which was the random copolymer of lysine and sarcosine (PLS), was synthesized via a phosgene-free and water-tolerable polymerization of -phenyloxycarbonyl-amino acids for the first time.

Influence of cationic groups on the antibacterial behavior of cationic nano-sized hyperbranched polymers to enhance bacteria-infected wound healing.

With the continuous emergence of drug-resistant pathogens, new strategies with high antibacterial efficacy are urgently needed. Herein, five cationic nano-sized hyperbranched polymers (CNHBPs) with cationic functional groups have been constructed, and their antibacterial mechanism has been studied in detail. CNHBPs bearing secondary ammonium salt groups and long alkyl chains (S-CNHBP) exhibited weak antibacterial and antibiofilm ability, while CNHBPs bearing quaternary ammonium salt groups and long alkyl chains (Q-CNHBP) showed the highest antimicrobial and strongest antibiofilm activities.

Ionic Dendrimer Based Polyamide Membranes for Ion Separation.

Separating low/high-valent ions with sub-nanometer sizes is a crucial yet challenging task in various areas (.., within environmental, healthcare, chemical, and energy engineering).

Enhancing the antifouling property of polymeric membrane via surface charge regulation.

In this study, positively charged monomers were grafted onto negatively charged membranes via UV radiation to improve the antifouling/antibiofouling properties of the polymeric membrane and the stability of the modification layer. The surface properties, morphologies, antifouling and antibiofouling properties, and stability of the modified membranes were systematically characterized. Results indicated that the introduction of [2-(methacryloyloxy) ethyl] trimethylammonium chloride (MTAC) monomers onto polyethersulfone (PES)/sulfonated polyethersulfone (SPES) membranes effectively increased the surface hydrophilicity.

Antifouling and antibacterial behavior of membranes containing quaternary ammonium and zwitterionic polymers.

To overcome the organic-/bio- fouling of the membrane, a dual-functional ultrafiltration membrane containing quaternary ammonium and zwitterionic polymers via quaternization and surface radical polymerization was designed, and its antifouling and antibacterial behavior was studied. In this work, poly(vinylidene fluoride)/poly(methyl methacrylate-co-dimethylamino-2-ethyl methacrylate) (PVDF/P(MMA-co-DMAEMA)) blend membrane was quaternized by p-chloromethyl styrene (p-CMS), and the double bonds were introduced onto the membrane surface, which further participated in the polymerization of zwitterionic monomers on the membrane surface. The results indicated that the resultant membrane exhibited obviously improved hydrophilicity and weak positive charge (isoelectric point, 7.

Improved permeability and antifouling properties of polyvinyl chloride ultrafiltration membrane via blending sulfonated polysulfone.

To improve the permeability and antifouling properties of polyvinyl chloride (PVC) ultrafiltration (UF) membrane, amphiphilic sulfonated polysulfone (SPSF) was introduced into PVC matrix. Three types of PVC/SPSF blend membranes containing different SPSF with the sulfonation degree (SD) of 20%, 30%, and 50% were fabricated by non-solvent induced phase separation (NIPS) process. The excellent compatibility between PVC and SPSF was confirmed by differential scanning calorimetry (DSC).

Electrostatic Adsorption Behavior of Zwitterionic Copolymers on Negatively Charged Surfaces.

To investigate the effect of the surface properties and the coating layer properties on surface modification via electrostatic adsorption, the electrostatic adsorption behavior of zwitterionic copolymers on negatively charged surfaces was studied. A series of positively charged zwitterionic copolymers and a series of negatively charged surfaces, including porous substrates and dense films, were fabricated. The electrostatic adsorption behavior of the zwitterionic copolymers on the negatively charged porous substrates was confirmed using the contact angles and fluorescently labeled protein adsorption experiments.

Negatively-charged nanofiltration membrane and its hexavalent chromium removal performance.

To enhance hexavalent chromium (Cr(VI)) removal performance under acidic conditions, the nanofiltration (NF) membrane with enhanced negative charge was fabricated via introducing 2, 5-diaminobenzenesulfonic acid (DABSA) into polyamide layer. The control membrane (NF-P) was directly prepared from piperazine and 1, 3, 5-benzenetricarbonyltrichloride. Surface chemical compositions, morphology, surface charge, pore size, permeability and pH-dependent separation performance of the fabricated membranes were characterized.

Antifouling Double-Skinned Forward Osmosis Membranes by Constructing Zwitterionic Brush-Decorated MWCNT Ultrathin Films.

Pressure retarded osmosis (PRO) process is hindered by severe fouling occurring within the porous support of the forward osmosis (FO) membranes. We designed a novel double-skinned FO membrane containing a polyamide salt-rejecting layer and a zwitterionic brush-decorated, multiwalled carbon nanotube (MWCNT/PSBMA) foulant-resisting layer on the back side. Our results demonstrated that the coating of the MWCNT/PSBMA layer on the porous polyketone (PK) support imparted enhanced hydrophilicity and smaller membrane pore size, thereby providing excellent resistance toward both protein adhesion and bacterial adsorption.

A positively charged tight UF membrane and its properties for removing trace metal cations via electrostatic repulsion mechanism.

The development of highly efficient membranes technology using low-pressure driven filtration process, is one of the principal challenges in the wastewater treatment field, especially those aimed at the removal of trace heavy metals. In this work, a novel positively charged tight ultrafiltration (PCTUF) membrane was developed to remove heavy metal cations (Mn, Co, Ni, Zn and Cd) from contaminated waters via electrostatic repulsion mechanism. The PCTUF membrane was fabricated from a new polymer with poly (vinyl chloride co dimethylaminoethyl methacrylate), P (VC-co-DMA) via a nonsolvent induce phase separation (NIPS) process and following facile surface quaternization.

Fouling-Resistant and Self-Cleaning Aliphatic Polyketone Membrane for Sustainable Oil-Water Emulsion Separation.

The cost-effective treatment of emulsified oily wastewater discharged by many industries and human societies is a great challenge. Herein, based on an aliphatic polyketone (PK) polymer with a good membrane formation ability and an intrinsic intermediate hydrophilicity, a new class of reduced PK (rPK) membranes combining an all hydrophilic and electrically neutral surface chemistry comprising ketone and hydroxyl groups, and a fibril-like morphology featuring re-entrant structure, was facilely prepared by phase separation and following fast surface reduction. The synergetic cooperation of surface chemistry and surface geometry endowed the prepared membranes with excellent superhydrophilicity, underwater superoleophobicity, and underoil superhydrophilicity, in addition to antiprotein-adhesion property.

One-step fabrication of polyamide 6 hollow fibre membrane using non-toxic diluents for organic solvent nanofiltration.

We developed new polyamide 6 hollow fibre membranes using a green process to fabricate cutting-edge "organic solvent nanofiltration" membranes by one-step spinning process for organic solvent separation. This economic and sustainable membrane showed good rejection and durability performance in various organic solvents.

Preparation of robust braid-reinforced poly(vinyl chloride) ultrafiltration hollow fiber membrane with antifouling surface and application to filtration of activated sludge solution.

Braid-reinforced hollow fiber membranes with high mechanical properties and considerable antifouling surface were prepared by blending poly(vinyl chloride) (PVC) with poly(vinyl chloride-co-poly(ethylene glycol) methyl ether methacrylate) (poly(VC-co-PEGMA)) copolymer via non-solvent induced phase separation (NIPS). The tensile strength of the braid-reinforced PVC hollow fiber membranes were significantly larger than those of previously reported various types of PVC hollow fiber membranes. The high interfacial bonding strength indicated the good compatibility between the coating materials and the surface of polyethylene terephthalate (PET)-braid.

Poly(vinylidene difluoride)/poly(tetrafluoroethylene-co-vinylpyrrolidone) blend membranes with antifouling properties.

To inhibit fouling phenomenon in membrane process, a new amphiphilic copolymer, poly(tetrafluoroethylene-co-vinylpyrrolidone) (P(TFE-VP)), was blended with poly(vinylidene difluoride) (PVDF) to fabricate a series of antifouling membranes via non solvent induced phase separation (NIPS) method. The effect of copolymer blend ratios and TFE/VP ratios on membrane properties were evaluated, and the stability of P(TFE-VP) in PVDF membrane was studied. The membrane morphology was controlled by adjusting polymer concentration in dope solution, such that all membranes have similar pore size and density, as well as pure water permeability.