Biomechanical Comparison of Inflatable Penile Implants: A Cadaveric Pilot Study.

Background: Throughout the last decade there has been a growing interest in the biomechanical differences between inflatable penile prostheses (IPPs) and their significance with regard to the patient experience.

Aim: To present our findings assessing the biomechanical properties of IPPs with and without rear tip extenders (RTEs).

Methods: This is a biomechanical study of the 3 most commonly used IPPs (AMS CX, AMS LGX, and Coloplast Titan) as assessed by column compression, modified cantilever deflection, and 3-point bending methods.

Longitudinal and Horizontal Load Testing of Inflatable Penile Implant Cylinders of Two Manufacturers: An Ex Vivo Demonstration of Inflated Rigidity.

Introduction: Since the inception of the inflatable penile prosthesis, a new era has been ushered in for the management of erectile dysfunction. Despite multiple innovations to improve function and reliability, there are no current data comparing the biomechanical properties of these devices.

Aim: To compare the resistance of the Coloplast Titan (Minneapolis, MN, USA) with that of the AMS 700 LGX (Minnetonka, MN, USA) penile prosthesis cylinders to longitudinal (penetration) and horizontal (gravity) forces.

Bifunctional Luminomagnetic Rare-Earth Nanorods for High-Contrast Bioimaging Nanoprobes.

Nanoparticles exhibiting both magnetic and luminescent properties are need of the hour for many biological applications. A single compound exhibiting this combination of properties is uncommon. Herein, we report a strategy to synthesize a bifunctional luminomagnetic Gd2-xEuxO3 (x = 0.

Surface functionalization of two-dimensional metal chalcogenides by Lewis acid-base chemistry.

Precise control of the electronic surface states of two-dimensional (2D) materials could improve their versatility and widen their applicability in electronics and sensing. To this end, chemical surface functionalization has been used to adjust the electronic properties of 2D materials. So far, however, chemical functionalization has relied on lattice defects and physisorption methods that inevitably modify the topological characteristics of the atomic layers.

Solid-Liquid Self-Adaptive Polymeric Composite.

A solid-liquid self-adaptive composite (SAC) is synthesized using a simple mixing-evaporation protocol, with poly(dimethylsiloxane) (PDMS) and poly(vinylidene fluoride) (PVDF) as active constituents. SAC exists as a porous solid containing a near equivalent distribution of the solid (PVDF)-liquid (PDMS) phases, with the liquid encapsulated and stabilized within a continuous solid network percolating throughout the structure. The pores, liquid, and solid phases form a complex hierarchical structure, which offers both mechanical robustness and a significant structural adaptability under external forces.

3D Band Diagram and Photoexcitation of 2D-3D Semiconductor Heterojunctions.

The emergence of a rich variety of two-dimensional (2D) layered semiconductor materials has enabled the creation of atomically thin heterojunction devices. Junctions between atomically thin 2D layers and 3D bulk semiconductors can lead to junctions that are fundamentally electronically different from the covalently bonded conventional semiconductor junctions. Here we propose a new 3D band diagram for the heterojunction formed between n-type monolayer MoS2 and p-type Si, in which the conduction and valence band-edges of the MoS2 monolayer are drawn for both stacked and in-plane directions.

Scalable Transfer of Suspended Two-Dimensional Single Crystals.

Large-scale suspended architectures of various two-dimensional (2D) materials (MoS2, MoSe2, WS2, and graphene) are demonstrated on nanoscale patterned substrates with different physical and chemical surface properties, such as flexible polymer substrates (polydimethylsiloxane), rigid Si substrates, and rigid metal substrates (Au/Ag). This transfer method represents a generic, fast, clean, and scalable technique to suspend 2D atomic layers. The underlying principle behind this approach, which employs a capillary-force-free wet-contact printing method, was studied by characterizing the nanoscale solid-liquid-vapor interface of 2D layers with respect to different substrates.

Carbon Nitrogen Nanotubes as Efficient Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions.

Oxygen reduction and evolution reactions are essential for broad range of renewable energy technologies such as fuel cells, metal-air batteries and hydrogen production through water splitting, therefore, tremendous effort has been taken to develop excellent catalysts for these reactions. However, the development of cost-effective and efficient bifunctional catalysts for both reactions still remained a grand challenge. Herein, we report the electrocatalytic investigations of bamboo-shaped carbon nitrogen nanotubes (CNNTs) having different diameter distribution synthesized by liquid chemical vapor deposition technique using different nitrogen containing precursors.

An Atomically Layered InSe Avalanche Photodetector.

Atomically thin photodetectors based on 2D materials have attracted great interest due to their potential as highly energy-efficient integrated devices. However, photoinduced carrier generation in these media is relatively poor due to low optical absorption, limiting device performance. Current methods for overcoming this problem, such as reducing contact resistances or back gating, tend to increase dark current and suffer slow response times.

Optoelectronic memory using two-dimensional materials.

An atomically thin optoelectronic memory array for image sensing is demonstrated with layered CuIn7Se11 and extended to InSe and MoS2 atomic layers. Photogenerated charge carriers are trapped and subsequently retrieved from the potential well formed by gating a 2D material with Schottky barriers. The atomically thin layered optoelectronic memory can accumulate photon-generated charges during light exposure, and the charges can be read out later for data processing and permanent storage.

Ternary CuIn7Se11 : towards ultra-thin layered photodetectors and photovoltaic devices.

A few-layered ternary Cu-In-Se compound is synthesized, the photoconductivity is measured, and 2D photovoltaic devices are fabricated. Few-layered CuIn7 Se11 has a strong photoresponse and the potential to serve as the active medium in ultra-thin photovoltaic devices.

Synthesis and photocurrent of amorphous boron nanowires.

Although theoretically feasible, synthesis of boron nanostructures is challenging due to the highly reactive nature, high melting and boiling points of boron. We have developed a thermal vapor transfer approach to synthesizing amorphous boron nanowire using a solid boron source. The amorphous nature and chemical composition of boron nanowires were characterized by high resolution transmission electron microscopy, selected area electron diffraction, and electron energy loss spectroscopy.

Anisotropically functionalized carbon nanotube array based hygroscopic scaffolds.

Creating ordered microstructures with hydrophobic and hydrophilic moieties that enable the collection and storage of small water droplets from the atmosphere, mimicking structures that exist in insects, such as the Stenocara beetle, which live in environments with limited amounts of water. Inspired by this approach, vertically aligned multiwalled carbon nanotube forests (NTFs) are asymmetrically end-functionalized to create hygroscopic scaffolds for water harvesting and storage from atmospheric air. One side of the NTF is made hydrophilic, which captures water from the atmosphere, and the other side is made superhydrophobic, which prevents water from escaping and the forest from collapsing.

Tailoring the physical properties of molybdenum disulfide monolayers by control of interfacial chemistry.

We demonstrate how substrate interfacial chemistry can be utilized to tailor the physical properties of single-crystalline molybdenum disulfide (MoS2) atomic-layers. Semiconducting, two-dimensional MoS2 possesses unique properties that are promising for future optical and electrical applications for which the ability to tune its physical properties is essential. We use self-assembled monolayers with a variety of end termination chemistries to functionalize substrates and systematically study their influence on the physical properties of MoS2.

Evolution of the electronic band structure and efficient photo-detection in atomic layers of InSe.

Atomic layers of two-dimensional (2D) materials have recently been the focus of extensive research. This follows from the footsteps of graphene, which has shown great potential for ultrathin optoelectronic devices. In this paper, we present a comprehensive study on the synthesis, characterization, and thin film photodetector application of atomic layers of InSe.

Synthesis and photoresponse of large GaSe atomic layers.

We report the direct growth of large, atomically thin GaSe single crystals on insulating substrates by vapor phase mass transport. A correlation is identified between the number of layers and a Raman shift and intensity change. We found obvious contrast of the resistance of the material in the dark and when illuminated with visible light.

Dynamics of ice nucleation on water repellent surfaces.

Prevention of ice accretion and adhesion on surfaces is relevant to many applications, leading to improved operation safety, increased energy efficiency, and cost reduction. Development of passive nonicing coatings is highly desirable, since current antiicing strategies are energy and cost intensive. Superhydrophobicity has been proposed as a lead passive nonicing strategy, yet the exact mechanism of delayed icing on these surfaces is not clearly understood.

Graphene quantum dots derived from carbon fibers.

Graphene quantum dots (GQDs), which are edge-bound nanometer-size graphene pieces, have fascinating optical and electronic properties. These have been synthesized either by nanolithography or from starting materials such as graphene oxide (GO) by the chemical breakdown of their extended planar structure, both of which are multistep tedious processes. Here, we report that during the acid treatment and chemical exfoliation of traditional pitch-based carbon fibers, that are both cheap and commercially available, the stacked graphitic submicrometer domains of the fibers are easily broken down, leading to the creation of GQDs with different size distribution in scalable amounts.

Direct evidence of phospholipids in gecko footprints and spatula-substrate contact interface detected using surface-sensitive spectroscopy.

Observers ranging from Aristotle to young children have long marvelled at the ability of geckos to cling to walls and ceilings. Detailed studies have revealed that geckos are 'sticky' without the use of glue or suction devices. Instead, a gecko's stickiness derives from van der Waals interactions between proteinaceous hairs called setae and substrate.

Cooperative adhesion and friction of compliant nanohairs.

The adhesion and friction behavior of soft materials, including compliant brushes and hairs, depends on the temporal and spatial evolution of the interfaces in contact. For compliant nanofibrous materials, the actual contact area individual fibers make with surfaces depends on the preload applied upon contact. Using in situ microscopy observations of preloaded nanotube hairs, we show how nanotubes make cooperative contact with a surface by buckling and conforming to the surface topography.

Sticky gecko feet: the role of temperature and humidity.

Gecko adhesion is expected to be temperature insensitive over the range of temperatures typically experienced by geckos. Previous work is limited and equivocal on whether this expectation holds. We tested the temperature dependence of adhesion in Tokay and Day geckos and found that clinging ability at 12 degrees C was nearly double the clinging ability at 32 degrees C.

Gecko-inspired carbon nanotube-based self-cleaning adhesives.

The design of reversible adhesives requires both stickiness and the ability to remain clean from dust and other contaminants. Inspired by gecko feet, we demonstrate the self-cleaning ability of carbon nanotube-based flexible gecko tapes.

Carbon nanotube-based synthetic gecko tapes.

We have developed a synthetic gecko tape by transferring micropatterned carbon nanotube arrays onto flexible polymer tape based on the hierarchical structure found on the foot of a gecko lizard. The gecko tape can support a shear stress (36 N/cm(2)) nearly four times higher than the gecko foot and sticks to a variety of surfaces, including Teflon. Both the micrometer-size setae (replicated by nanotube bundles) and nanometer-size spatulas (individual nanotubes) are necessary to achieve macroscopic shear adhesion and to translate the weak van der Waals interactions into high shear forces.

Polymerizable bis(2-ethylhexyl)sulfosuccinate: application in microemulsion polymerization.

A hygroscopic and polymerizable salt ([2-methacryloyloxy]ethyl trimethylammonium chloride) is used to ion exchange the sodium ion in AOT (bis[2-ethylhexyl]sulfosuccinate, sodium salt) to produce a polymerizable form of AOT, MDOS ([2-methacryloyloxy]ethyl trimethylammonium bis[2-ethylhexyl]sulfosuccinate). A partial ternary phase diagram of water, MDOS, and methyl methacrylate (MMA) was determined at room temperature (22 +/- 1 degrees C). A relatively large L2 domain is obtained, but this domain is smaller than that obtained with AOT.