Operando Investigation of Zr Doping in NMC811 Cathode for High Energy Density Lithium Ion Batteries.

LiNi0.8Mn0.1Co0.

Surface and Grain Boundary Coating for Stabilizing LiNiMnCoO Based Electrodes.

The widespread use of high-capacity Ni-rich layered oxides such as LiNiMnCoO (NMC811), in lithium-ion batteries is hindered due to practical capacity loss and reduced working voltage during operation. Aging leads to defective NMC811 particles, affecting electrochemical performance. Surface modification offers a promising approach to improve cycle life.

High Voltage Cycling Stability of LiF-Coated NMC811 Electrode.

The development of LiNiMnCoO (NMC811) as a cathode material for high-energy-density lithium-ion batteries (LIBs) intends to address the driving limitations of electric vehicles. However, the commercialization of this technology has been hindered by poor cycling stability at high cutoff voltages. The potential instability and drastic capacity fade stem from irreversible parasitic side reactions at the electrode-electrolyte interface.

Understanding the Stabilizing Effects of Nanoscale Metal Oxide and Li-Metal Oxide Coatings on Lithium-Ion Battery Positive Electrode Materials.

Nickel-rich layered oxides, such as LiNiCoMnO (NMC622), are high-capacity electrode materials for lithium-ion batteries. However, this material faces issues, such as poor durability at high cut-off voltages (>4.4 V vs Li/Li), which mainly originate from an unstable electrode-electrolyte interface.

Giant anisotropic photonics in the 1D van der Waals semiconductor fibrous red phosphorus.

A confined electronic system can host a wide variety of fascinating electronic, magnetic, valleytronic and photonic phenomena due to its reduced symmetry and quantum confinement effect. For the recently emerging one-dimensional van der Waals (1D vdW) materials with electrons confined in 1D sub-units, an enormous variety of intriguing physical properties and functionalities can be expected. Here, we demonstrate the coexistence of giant linear/nonlinear optical anisotropy and high emission yield in fibrous red phosphorus (FRP), an exotic 1D vdW semiconductor with quasi-flat bands and a sizeable bandgap in the visible spectral range.

Jahn-Teller Distortion Induced Mn-Rich Cathode Enables Optimal Flexible Aqueous High-Voltage Zn-Mn Batteries.

Although one of the most promising aqueous batteries, all Zn-Mn systems suffer from Zn dendrites and the low-capacity Mn/Mn process (readily leading to the occurrence of Jahn-Teller distortion, which in turn causes structural collapse and voltage/capacity fading). Here, the Mn reconstruction and disproportionation are exploited to prepare the stable, Mn-rich manganese oxides on carbon-cloth (CMOs) in a discharged state through an inverted design, which promotes reversible Mn/Mn kinetics and mitigates oxygen-related redox activity. Such a 1.

Single-step chemical vapour deposition of anti-pyramid MoS/WS vertical heterostructures.

Van der Waals heterostructures are the fundamental building blocks of electronic and optoelectronic devices. Here we report that, through a single-step chemical vapour deposition (CVD) process, high-quality vertical bilayer MoS2/WS2 heterostructures with a grain size up to ∼60 μm can be synthesized from molten salt precursors, Na2MoO4 and Na2WO4. Instead of normal pyramid vertical heterostructures grown by CVD, this method synthesizes an anti-pyramid MoS2/WS2 structure, which is characterized by Raman, photoluminescence and second harmonic generation microscopy.

Structural Phase Transitions to 2D and 3D Oxygen Vacancy Patterns in a Perovskite Film Induced by Electrical and Mechanical Nanoprobing.

Oxygen vacancy migration and ordering in perovskite oxides enable manipulation of material properties through changes in the cation oxidation state and the crystal lattice. In thin-films, oxygen vacancies conventionally order into equally spaced planes. Here, it is shown that the planar 2D symmetry is broken if a mechanical nanoprobe restricts the chemical lattice expansion that the vacancies generate.

Low-loss YIG-based magnonic crystals with large tunable bandgaps.

Control of spin waves in magnonic crystals is essential for magnon-based computing. Crystals made of ferromagnetic metals offer versatility in band structure design, but strong magnetic damping restricts their transmission efficiency. Yttrium iron garnet (YIG) with ultralow damping is the palpable alternative, yet its small saturation magnetization limits dipolar coupling between discrete units.

Publisher Correction: Influence of intermixing at the Ta/CoFeB interface on spin Hall angle in Ta/CoFeB/MgO heterostructures.

A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.

Influence of intermixing at the Ta/CoFeB interface on spin Hall angle in Ta/CoFeB/MgO heterostructures.

When a current is passed through a non-magnetic metal with strong spin-orbit coupling, an orthogonal spin current is generated. This spin current can be used to switch the magnetization of an adjacent ferromagnetic layer or drive its magnetization into continuous precession. The interface, which is not necessarily sharp, and the crystallographic structure of the nonmagnetic metal can both affect the strength of current-induced spin-orbit torques.

Direct observation of oxygen vacancy-driven structural and resistive phase transitions in LaSrMnO.

Resistive switching in transition metal oxides involves intricate physical and chemical behaviours with potential for non-volatile memory and memristive devices. Although oxygen vacancy migration is known to play a crucial role in resistive switching of oxides, an in-depth understanding of oxygen vacancy-driven effects requires direct imaging of atomic-scale dynamic processes and their real-time impact on resistance changes. Here we use in situ transmission electron microscopy to demonstrate reversible switching between three resistance states in epitaxial LaSrMnO films.

Resistive Switching in All-Oxide Ferroelectric Tunnel Junctions with Ionic Interfaces.

Universal, giant and nonvolatile resistive switching is demonstrated for oxide tunnel junctions with ferroelectric PbZr0.2 Ti0.8 O3 , ferroelectric BaTiO3, and paraelectric SrTiO3 tunnel barriers.

Concurrent bandgap narrowing and polarization enhancement in epitaxial ferroelectric nanofilms.

Perovskite-type ferroelectric (FE) crystals are wide bandgap materials with technologically valuable optical and photoelectric properties. Here, versatile engineering of electronic transitions is demonstrated in FE nanofilms of KTaO, KNbO (KNO), and NaNbO (NNO) with a thickness of 10-30 unit cells. Control of the bandgap is achieved using heteroepitaxial growth of new structural phases on SrTiO (001) substrates.

Magneto-ionic control of interfacial magnetism.

In metal/oxide heterostructures, rich chemical, electronic, magnetic and mechanical properties can emerge from interfacial chemistry and structure. The possibility to dynamically control interface characteristics with an electric field paves the way towards voltage control of these properties in solid-state devices. Here, we show that electrical switching of the interfacial oxidation state allows for voltage control of magnetic properties to an extent never before achieved through conventional magneto-electric coupling mechanisms.

Electron-beam-induced Perovskite-Brownmillerite-Perovskite structural phase transitions in epitaxial La2/3Sr1/3MnO3 films.

Structural phase transitions driven by oxygen-vacancy ordering can drastically affect the properties of transition metal oxides. The focused electron beam of a transmission electron microscope (TEM) can be used to control structural phase transitions in epitaxial La2/3Sr1/3MnO3. The ability to induce and characterize oxygen-deficient structural phases simultaneously in a continuous and controllable manner opens up new pathways for atomic-scale studies of transition metal oxides and other complex materials.

Coherent piezoelectric strain transfer to thick epitaxial ferromagnetic films with large lattice mismatch.

Strain control of epitaxial films using piezoelectric substrates has recently attracted significant scientific interest. Despite its potential as a powerful test bed for strain-related physical phenomena and strain-driven electronic, magnetic, and optical technologies, detailed studies on the efficiency and uniformity of piezoelectric strain transfer are scarce. Here, we demonstrate that full and uniform piezoelectric strain transfer to epitaxial films is not limited to systems with small lattice mismatch or limited film thickness.

Fundamental calculations on the surface area determination of supported gold nanoparticles by alkanethiol adsorption.

Surface area determination is a crucial step for the characterization of the activity of noble metal catalysts. Not only the development of useful determination methods but foremost the understanding of surface properties and their conversion into mathematical expressions are essential to obtain reliable results. A selective method to gain access to the specific surface area of gold on oxidic supports is the chemisorption of alkanethiol from suspensions.

Si-CdSSe core/shell nanowires with continuously tunable light emission.

Uniform Si-CdSSe core/shell nanowires were controllably synthesized by a multisource thermal evaporation route. Both the silicon core and the alloyed CdSSe shell are of high-quality and single crystalline. The silicon core is grown via the gold-catalyzed VLS route with a silicon wafer piece at the high temperature zone as the source.

Applications of mesenchymal stem cells labeled with Tat peptide conjugated quantum dots to cell tracking in mouse body.

Fluorescent quantum dots have great potential in cellular labeling and tracking. Here, PEG encapsulated CdSe/ZnS quantum dots have been conjugated with Tat peptide, and introduced into living mesenchymal stem cells. The Tat peptide conjugated quantum dots in mesenchymal stem cells were assessed by fluorescent microscopy, laser confocal microscope and.