Separating Crystal Growth from Nucleation Enables the In Situ Controllable Synthesis of Nanocrystals for Efficient Perovskite Light-Emitting Diodes.

Colloidal perovskite nanocrystals (PNCs) display bright luminescence for light-emitting diode (LED) applications; however, they require post-synthesis ligand exchange that may cause surface degradation and defect formation. In situ-formed PNCs achieve improved surface passivation using a straightforward synthetic approach, but their LED performance at the green wavelength is not yet comparable with that of colloidal PNC devices. Here, it is found that the limitations of in situ-formed PNCs stem from uncontrolled formation kinetics: conventional surface ligands confine perovskite nuclei but fail to delay crystal growth.

Efficient Semitransparent Organic Solar Cells Enabled by Ag Grid Electrodes and Optical Coupling Layers.

Semitransparent organic solar cells (ST-OSCs) show great promise for building integrated photovoltaic systems. The balance between power conversion efficiency (PCE) and average visible transmittance (AVT) is a key point of ST-OSCs. We developed a novel semitransparent organic solar cell (ST-OSC) with high PCE and AVT for building integrated renewable energy applications.

A Review of Recent Advances in Vital Signals Monitoring of Sports and Health via Flexible Wearable Sensors.

In recent years, vital signals monitoring in sports and health have been considered the research focus in the field of wearable sensing technologies. Typical signals include bioelectrical signals, biophysical signals, and biochemical signals, which have applications in the fields of athletic training, medical diagnosis and prevention, and rehabilitation. In particular, since the COVID-19 pandemic, there has been a dramatic increase in real-time interest in personal health.

Quinonoid Zwitterion: An Amphiphilic Cathode Interlayer with Initial Thickness-Insensitive and Self-Organizing Properties for Inverted Polymer Solar Cells.

Orthogonal solvent processability is generally considered as one of the key requirements for an efficient interfacial material. Here, we showed that in inverted polymer solar cells (PSCs), solvent orthogonality is not required for an effective and reliable cathode interlayer. A quinonoid zwitterionic molecule with amphiphilic property [dissolved in both methanol and -dichlorobenzene (-DCB)] named ZW-Bu was first applied as the cathode interlayer in inverted PSCs.

Efficient and chromaticity-stable flexible white organic light-emitting devices based on organic-inorganic hybrid color-conversion electrodes.

We have developed a novel organic-inorganic hybrid color conversion electrode composed of Ag NWs/poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) a solution process, which is the first report on a color conversion electrode for applications in flexible optoelectronics. Using the Ag NWs/MEH-PPV composite film as the anode on polyethylene terephthalate substrate and combined with a blue organic light emitting devices (OLEDs) unit employing bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium(iii)) (Flrpic) in 1,3-bis(carbazol-9-yl)benzene (mCP) as the emitting layer, a highly efficient and chromaticity-stable color-conversion flexible white OLEDs (WOLEDs) is achieved with a maximum current efficiency of 20.5 cd A.

Self-assembly of copper-free maltoheptaose-block-polystyrene nanostructured thin films in real and reciprocal space.

The promising carbohydrate-based block copolymer maltoheptaose-block-polystyrene (MH-b-PS) has been used for high-performance memory transistors and next generation nanolithography. In order to realize the potential of MH-b-PS especially in microelectronic applications, we firstly improved its synthetic method for obtaining large amount of copper-free MH-b-PS. The main improvement relies on the removal of the residual copper catalyst by using a chelating resin.

Carbohydrate-Based Block Copolymer Thin Films: Ultrafast Nano-Organization with 7 nm Resolution Using Microwave Energy.

Block copolymers (BCP) can self-assemble into nanoscale patterns with a wide variety of applications in the semiconductor industry. The self-assembly of BCPs is commonly accomplished by solvent vapor or thermal annealing, but generally these methods require long time (few hours) to obtain nanostructured thin films. In this contribution, a new and ultrafast method (using microwaves) is proposed-high temperature solvent vapor annealing (HTSVA), combining solvent vapor annealing with thermal annealing, to achieve fast and controllable self-assembly of amphiphilic BCP thin films.

Electrosprayed molybdenum trioxide aqueous solution and its application in organic photovoltaic cells.

A molybdenum trioxide thin film with smooth surface and uniform thickness was successfully achieved by an electrospray deposition method using an aqueous solution with a drastically low concentration of 0.05 wt%. Previous papers demonstrated that an additive solvent technique is useful for depositing the thin film by the electrospray deposition, and the high vapor pressure and a low surface tension of an additive solvent were found to be important factors.

Diameter control of ultrathin zinc oxide nanofibers synthesized by electrospinning.

Electrospinning is a versatile technique, which can be used to generate nanofibers from a rich variety of materials. We investigate the variation of a zinc oxide (ZnO)-polyvinylpyrrolidone (PVP) composite structure in morphology by electrospinning from a series of mixture solutions of ZnO sol-gel and PVP. Calcination conditions for the crystallization of ZnO nanofibers and removal of the PVP component from the ZnO-PVP composite nanofibers were also studied.

Preparation of organic light-emitting diode using coal tar pitch, a low-cost material, for printable devices.

We have identified coal tar pitch, a very cheap organic material made from coal during the iron-making process, as a source from which could be obtained emissive molecules for organic light-emitting diodes. Coal tar pitch was separated by simple dissolution in organic solvent, and subsequent separation by preparative thin-layer chromatography was used to obtain emissive organic molecules. The retardation factor of preparative thin-layer chromatography played a major role in deciding the emission characteristics of the solution as photoluminescence spectra and emission-excitation matrix spectra could be controlled by modifying the solution preparation method.

[Highly efficient and chromatic-stability yellow organic light emitting diodes using double ultra thin yellow emissive layers].

The authors investigated the efficiency and chromatic-stability characteristics of organic light emitting devices (OLEDs) with ultra-thin yellow emissive layers of 0.1 nm 5,6,11,12,-tetraphenylnaphthacene (rubrene) and hole block layer of BCP. The OLEDs with double thin rubrene layers and BCP layer were found to exhibit a high luminance and electroluminescence (EL) efficiency.