Fiber-Reinforced Flexible Self-Healing Strain Sensor with Failure-Improving Sensitivity Recovery.

In this work, we address the inherent limitations of porous, flexible, fibrous, and self-healing strain sensors. Specifically, we tackle issues such as the fatigue failure of carbon-fibrous materials and the long-term flow and low mechanical stability of self-healing materials. We achieve this by combining self-healing carbon/PBS blends with fibrous materials, creating a fiber-reinforced self-healing composite.

Composite Alginate Dialdehyde-Gelatin (ADA-GEL) Hydrogel Containing Short Ribbon-Shaped Fillers for Skeletal Muscle Tissue Biofabrication.

Skeletal muscle tissue can be severely damaged by disease or trauma beyond its ability to self-repair, necessitating the further development of biofabrication and tissue-engineering tools for reconstructive processes. Hence, in this study, a composite bioink of oxidized alginate (ADA) and gelatin (GEL) including cell-laden ribbon-shaped fillers is used for enhancing cell alignment and the formation of an anisotropic structure. Different plasma treatments combined with protein coatings were evaluated for the improvement of cell adhesion to poly(lactic--glycolic acid) (PLGA) ribbon surfaces.

Modular photoorigami-based 4D manufacturing of vascular junction elements.

Four-dimensional (4D) printing, combining three-dimensional (3D) printing with time-dependent stimuli-responsive shape transformation, eliminates the limitations of the conventional 3D printing technique for the fabrication of complex hollow constructs. However, existing 4D printing techniques have limitations in terms of the shapes that can be created using a single shape-changing object. In this paper, we report an advanced 4D fabrication approach for vascular junctions, particularly T-junctions, using the 4D printing technique based on coordinated sequential folding of two or more specially designed shape-changing elements.

4D Fabrication of Two-Way Shape Memory Polymeric Composites by Electrospinning and Melt Electrowriting.

This work presents a new method for 4D fabrication of two-way shape memory materials that are capable of reversible shapeshifting right after manufacturing, upon application of proper heating and cooling cycles. The innovative solution presented here consists in the combination of highly stretched electrospun shape memory polymer (SMP) nanofibers with a melt electrowritten elastomer. More specifically, the stretched nanofibers are made of a biocompatible thermoplastic polyurethane (TPU) with crystallizable soft segments, undergoing melt-induced contraction and crystallization-induced elongation upon heating and cooling, respectively.

Biofabrication of Composite Bioink-Nanofiber Constructs: Effect of Rheological Properties of Bioinks on 3D (Bio)Printing and Cells Interaction with Aligned Touch Spun Nanofibers.

This paper reports on a novel approach for the fabrication of composite multilayered bioink-nanofibers construct. This work achieves this by using a hands-free 3D (bio)printing integrated touch-spinning approach. Additionally, this work investigates the interaction of fibroblasts in different bioinks with the highly aligned touch-spun nanofibers.

4D-Printable Photocrosslinkable Polyurethane-Based Inks for Tissue Scaffold and Actuator Applications.

4D printing recently emerges as an exciting evolution of conventional 3D printing, where a printed construct can quickly transform in response to a specific stimulus to switch between a temporary variable state and an original state. In this work, a photocrosslinkable polyethylene-glycol polyurethane ink is synthesized for light-assisted 4D printing of smart materials. The molecular weight distribution of the ink monomers is tunable by adjusting the copolymerization reaction time.

Ink Material Selection and Optical Design Considerations in DLP 3D Printing.

Digital light processing (DLP) 3D printing has become a powerful manufacturing tool for the fast fabrication of complex functional structures. The rapid progress in DLP printing has been linked to research on optical design factors and ink selection. This highlights the main challenges in the DLP printing of photopolymerizable inks.

Electrospun cellulose acetate nanofibrous composites for multi-responsive shape memory actuators and self-powered pressure sensors.

Soft actuators and sensors have attracted extensive scientific interest attributed to their great potential applications in various fields, but the integration of actuating and sensing functions in one material is still a big challenge. Here, we developed an electrospun cellulose acetate (CA)/carbon nanotube nanofiborous composite with both functional applications as multi-responsive shape memory actuators and triboelectric nanogenerator (TENG) based sensors. Attributed to excellent thermo- and light-induced shape memory performance, the CA nanofiborous composites showed high heavy-lift capability as light driven actuators, able to lift burdens 1050 times heavier than their own weight.

Self-healable printed magnetic field sensors using alternating magnetic fields.

We employ alternating magnetic fields (AMF) to drive magnetic fillers actively and guide the formation and self-healing of percolation networks. Relying on AMF, we fabricate printable magnetoresistive sensors revealing an enhancement in sensitivity and figure of merit of more than one and two orders of magnitude relative to previous reports. These sensors display low noise, high resolution, and are readily processable using various printing techniques that can be applied to different substrates.

4D Biofabrication of Mechanically Stable Tubular Constructs Using Shape Morphing Porous Bilayers for Vascularization Application.

This study reports the fabrication of highly porous electrospun self-folding bilayers, which fold into tubular structures with excellent mechanical stability, allowing them to be easily manipulated and handled. Two kinds of bilayers based on biocompatible and biodegradable soft (PCL, polycaprolactone) and hard (PHB, poly-hydroxybutyrate) thermoplastic polymers have been fabricated and compared. Multi-scroll structures with tunable diameter are obtained after the shape transformation of the bilayer in aqueous media, where PCL-based bilayer rolled longitudinally and PHB-based one rolled transversely with respect to the fiber direction.

Self-Healing and Electrical Properties of Viscoelastic Polymer-Carbon Blends.

Self-healing polymer-carbon composites are seen as promising materials for future electronic devices, which must be able to restore not only their structural integrity but also electrical performance after cracking and wear. Despite multiple reports about self-healing conductive elements, there is a lack of a broad fundamental understanding of correlation between viscoelasticity of such composites, their electrical properties, and self-healing of their mechanical as well as electrical properties. Here, it is reported thorough investigation of electromechanical properties of blends of carbon black (CB) as conductive filler and viscoelastic polymers (polydimethylsiloxanes (PDMS) and polyborosiloxane (PBS)) with different relaxation times as matrices.

Smart Mechanically Tunable Surfaces with Shape Memory Behavior and Wetting-Programmable Topography.

This paper reports for the first time the fabrication and investigation of wetting properties of structured surfaces formed by lamellae with an exceptionally high aspect ratio of up to 57:1 and more. The lamellar surfaces were fabricated using a polymer with tunable mechanical properties and shape-memory behavior. It was found that wetting properties of such structured surfaces depend on temperature, and thermal treatment history-structured surfaces are wetted easier at elevated temperature or after cooling to room temperature when the polymer is soft because of the easier deformability of lamellae.

Digital Light Processing Bioprinting Advances for Microtissue Models.

Digital light processing (DLP) bioprinting has been widely introduced as a fast and robust biofabrication method in tissue engineering. The technique holds a great promise for creating tissue models because it can replicate the resolution and complexity of natural tissues and constructs. A DLP system projects 2D images onto layers of bioink using a digital photomask.

Shape-Morphing Fibrous Hydrogel/Elastomer Bilayers Fabricated by a Combination of 3D Printing and Melt Electrowriting for Muscle Tissue Regeneration.

This paper reports an approach for the fabrication of shape-changing bilayered scaffolds, which allow the growth of aligned skeletal muscle cells, using a combination of 3D printing of hyaluronic acid hydrogel, melt electrowriting of thermoplastic polycaprolactone-polyurethane elastomer, and shape transformation. The combination of the selected materials and fabrication methods allows a number of important advantages such as biocompatibility, biodegradability, and suitable mechanical properties (elasticity and softness of the fibers) similar to those of important components of extracellular matrix (ECM), which allow proper cell alignment and shape transformation. Myoblasts demonstrate excellent viability on the surface of the shape-changing bilayer, where they occupy space between fibers and align along them, allowing efficient cell patterning inside folded structures.

Fibrous Scaffolds for Muscle Tissue Engineering Based on Touch-Spun Poly(Ester-Urethane) Elastomer.

Development of fiber-spinning technologies and materials with proper mechanical properties is highly important for the manufacturing of aligned fibrous scaffolds mimicking structure of the muscle tissues. Here, the authors report touch spinning of a thermoplastic poly(1,4-butylene adipate)-based polyurethane elastomer, obtained via solvent-free polymerization. This polymer possesses a combination of important advantages such as 1) low elastic modulus in the range of a few MPa, 2) good recovery ratio and 3) resilience, 4) processability, 5) nontoxicity, 6) biocompatibility, and 7) biodegradability that makes it suitable for fabrication of structures mimicking extracellular matrix of muscle tissue.

Soft Elastic Fibrous Scaffolds for Muscle Tissue Engineering by Touch Spinning.

This paper reports an approach for the fabrication of highly aligned soft elastic fibrous scaffolds using touch spinning of thermoplastic polycaprolactone-polyurethane elastomers and demonstrates their potential for the engineering of muscle tissue. A family of polyester-polyurethane soft copolymers based on polycaprolactone with different molecular weights and three different chain extenders such as 1,4-butanediol and polyethylene glycols with different molecular weight was synthesized. By varying the molar ratio and molecular weights between the segments of the copolymer, different physicochemical and mechanical properties were obtained.

Materials for Smart Soft Actuator Systems.

In contrast to conventional hard actuators, soft actuators offer many vivid advantages, such as improved flexibility, adaptability, and reconfigurability, which are intrinsic to living systems. These properties make them particularly promising for different applications, including soft electronics, surgery, drug delivery, artificial organs, or prosthesis. The additional degree of freedom for soft actuatoric devices can be provided through the use of intelligent materials, which are able to change their structure, macroscopic properties, and shape under the influence of external signals.

4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers.

We report the fabrication of scroll-like scaffolds with anisotropic topography using 4D printing based on a combination of 3D extrusion printing of methacrylated alginate, melt-electrowriting of polycaprolactone fibers, and shape-morphing of the fabricated object. A combination of 3D extrusion printing and melt-electrowriting allows programmed deposition of different materials and fabrication of structures with high resolution. Shape-morphing allows the transformation of a patterned surface of a printed structure in a pattern on inner surface of a folded object that is used to align cells.

4D Biofabrication of fibrous artificial nerve graft for neuron regeneration.

In this paper, we describe the application of the 4D biofabrication approach for the fabrication of artificial nerve graft. Bilayer scaffolds consisting of uniaxially aligned polycaprolactone-poly(glycerol sebacate) (PCL-PGS) and randomly aligned methacrylated hyaluronic acid (HA-MA) fibers were fabricated using electrospinning and further used for the culture of PC-12 neuron cells. Tubular structures form instantly after immersion of fibrous bilayer in an aqueous buffer and the diameter of obtained tubes can be controlled by changing bilayer parameters such as the thickness of each layer, overall bilayer thickness, and medium counterion concentration.

Shape-changing polymers for biomedical applications.

Smart polymers that are capable of controlled shape transformations under external stimuli have attracted significant attention in the recent years due to the resemblance of this behavior to the biological intelligence observed in nature. Moreover, shape-morphing polymer-based materials are great candidates for biomedical applications due to their adaptive properties, controlled shape transformations, and enriched functionality. In this review, we focus on the recent progress in the field of shape-memory and shape-changing polymers, highlighting their most promising applications in the biomedical field.

Shape-morphing architectures actuated by Janus fibers.

We describe a combined experimental and theoretical investigation of shape-morphing structures assembled by actuating composite (Janus) fibers, taking into account multiple relevant factors affecting shape transformations, such as strain rate, composition, and geometry of the structures. Starting with simple bending experiments, we demonstrate the ways to attain multiple out-of-plane shapes of closed rings and square frames. Through combining theory and simulation, we examine how the mechanical properties of Janus fibers affect shape transitions.

4D biofabrication of skeletal muscle microtissues.

Skeletal muscle is one of the most abundant tissues in the body. Although it has a relatively good regeneration capacity, it cannot heal in the case of disease or severe damage. Many current tissue engineering strategies fall short due to the complex structure of skeletal muscle.

4D Biofabrication: Materials, Methods, and Applications.

The mission of regenerative medicine is the development of methods to regrow, repair, or replace damaged or diseased cells, organs, or tissues. 3D bioprinting techniques are one of the most promising approaches for engineering the design of artificial tissues. Current 3D bioprinting technologies possess, however, several intrinsic limitations.

4D Biofabrication Using Shape-Morphing Hydrogels.

Despite the tremendous potential of bioprinting techniques toward the fabrication of highly complex biological structures and the flourishing progress in 3D bioprinting, the most critical challenge of the current approaches is the printing of hollow tubular structures. In this work, an advanced 4D biofabrication approach, based on printing of shape-morphing biopolymer hydrogels, is developed for the fabrication of hollow self-folding tubes with unprecedented control over their diameters and architectures at high resolution. The versatility of the approach is demonstrated by employing two different biopolymers (alginate and hyaluronic acid) and mouse bone marrow stromal cells.