Optimal Excitation and Readout of Resonators Used as Wireless Passive Sensors.

Resonators are passive time-invariant components that do not produce a frequency shift. However, they respond to an excitation signal close to resonance with an oscillation at their natural frequencies with exponentially decreasing amplitudes. If resonators are connected to antennas, they form purely passive sensors that can be read remotely.

Automatic Life Detection Based on Efficient Features of Ground-Penetrating Rescue Radar Signals.

Good feature engineering is a prerequisite for accurate classification, especially in challenging scenarios such as detecting the breathing of living persons trapped under building rubble using bioradar. Unlike monitoring patients' breathing through the air, the measuring conditions of a rescue bioradar are very complex. The ultimate goal of search and rescue is to determine the presence of a living person, which requires extracting representative features that can distinguish measurements with the presence of a person and without.

Wireless Passive Sensor Technology through Electrically Conductive Media over an Acoustic Channel.

Hydrogen-based technologies provide a potential route to more climate-friendly mobility in the automotive and aviation industries. High-pressure tanks consisting of carbon-fiber-reinforced polymers (CFRPs) are exploited for the storage of compressed hydrogen and have to be monitored for safe and long-term operation. Since neither wired sensors nor wireless radio technology can be used inside these tanks, acoustic communication through the hull of the tank has been the subject of research in recent years.

Frequency Comb-Based Ground-Penetrating Bioradar: System Implementation and Signal Processing.

Radars can be used as sensors to detect the breathing of victims trapped under layers of building materials in catastrophes like earthquakes or gas explosions. In this contribution, we present the implementation of a novel frequency comb continuous wave (FCCW) bioradar module using a commercial software-defined radio (SDR). The FCCW radar transmits multiple equally spaced frequency components simultaneously.

An Algorithm for Solving the Phase Ambiguity Problem of SAW Delay-Line Sensor Systems.

Solving the phase ambiguity problem is crucial to achieving a wide-range and high-precision measurement for the frequency-domain sampling (FDS)-based surface acoustic wave (SAW) delay-line sensor systems. This study proposes an improved phase estimation algorithm called dual-band phase estimation (DBPE) to solve the problem. By using DBPE, the SAW sensor system can obtain an extensive and alterable measuring range without further requirements for sensor design or transmitted signals.

Behavioral Modeling of DC/DC Converters in Self-Powered Sensor Systems with Modelica.

DC/DC converters are the essential component of power management in applications such as self-powered systems. Their simulation plays an important role in the configuration, analysis and design. A major drawback is the lack of behavioral models for DC/DC converters for long-term simulations (days or months).

A Novel Electrically Small Ground-Penetrating Radar Patch Antenna with a Parasitic Ring for Respiration Detection.

An electrically small patch antenna with a low-cost high-permittivity ceramic substrate material for use in a ground-penetrating radar is proposed in this work. The antenna is based on a commercial ceramic 915 MHz patch antenna with a size of 25 × 25 × 4 mm and a weight of 12.9 g.

Medlay: A Reconfigurable Micro-Power Management to Investigate Self-Powered Systems.

In self-powered microsystems, a power management is essential to extract, transfer and regulate power from energy harvesting sources to loads such as sensors. The challenge is to consider all of the different structures and components available and build the optimal power management on a microscale. The purpose of this paper is to streamline the design process by creating a novel reconfigurable testbed called Medlay.

Wake-Up Receiver with Equal-Gain Antenna Diversity .

Small scale fading signals resulting from multipath propagation can cause signal strength variations in the range of several dB. Resulting from the fluctuating signal strengths, the wake-up packet reception rate can decrease significantly. Using antenna diversity can greatly mitigate these effects.

Multicarrier airborne ultrasound transmission with piezoelectric transducers.

In decentralized localization systems, the received signal has to be assigned to the sender. Therefore, longrange airborne ultrasound communication enables the transmission of an identifier of the sender within the ultrasound signal to the receiver. Further, in areas with high electromagnetic noise or electromagnetic free areas, ultrasound communication is an alternative.

Accurate characterization of SiO2 thin films using surface acoustic waves.

We have investigated the acoustic properties of silicon dioxide thin films. Therefore, we determined the phase velocity dispersion of LiNbO3 substrate covered with SiO2 deposited by a plasma enhanced chemical vapor deposition and a physical vapor deposition (PVD) process using differential delay lines and laser ultrasonic method. The density p and the elastic constants (c11 and c44) can be extracted by fitting corresponding finite element simulations to the phase velocities within an accuracy of at least +4%.

RFID Technology for Continuous Monitoring of Physiological Signals in Small Animals.

Telemetry systems enable researchers to continuously monitor physiological signals in unrestrained, freely moving small rodents. Drawbacks of common systems are limited operation time, the need to house the animals separately, and the necessity of a stable communication link. Furthermore, the costs of the typically proprietary telemetry systems reduce the acceptance.

Experimental and theoretical investigations of some useful langasite cuts for high-temperature SAW applications.

Passive high-temperature sensors are a most promising area of use for SAW devices. Langasite (La3Ga5SiO14; LGS) has been identified as promising piezoelectric material to meet high-temperature SAW challenges. Because it is necessary to know the material behavior for an accurate device design, the frequency¿temperature behavior of Rayleigh SAW (R-SAW) and shear-horizontal SAW (SH-SAW) LGS cuts is investigated on delay line and resonator test structures up to 700°C by RF characterization.

High-precision signal processing algorithm to evaluate SAW properties as a function of temperature.

This paper presents a signal processing algorithm which accurately evaluates the SAW properties of a substrate as functions of temperature. The investigated acoustic properties are group velocity, phase velocity, propagation loss, and coupling coefficient. With several measurements carried out at different temperatures, we obtain the temperature dependency of the SAW properties.

Multi reflection of Lamb wave emission in an acoustic waveguide sensor.

Recently, an acoustic waveguide sensor based on multiple mode conversion of surface acoustic waves at the solid-liquid interfaces has been introduced for the concentration measurement of binary and ternary mixtures, liquid level sensing, investigation of spatial inhomogenities or bubble detection. In this contribution the sound wave propagation within this acoustic waveguide sensor is visualized by Schlieren imaging for continuous and burst operation the first time. In the acoustic waveguide the antisymmetrical zero order Lamb wave mode is excited by a single phase transducer of 1 MHz on thin glass plates of 1 mm thickness.

Optimization of passive low power wireless electromagnetic energy harvesters.

This work presents the optimization of antenna captured low power radio frequency (RF) to direct current (DC) power converters using Schottky diodes for powering remote wireless sensors. Linearized models using scattering parameters show that an antenna and a matched diode rectifier can be described as a form of coupled resonator with different individual resonator properties. The analytical models show that the maximum voltage gain of the coupled resonators is mainly related to the antenna, diode and load (remote sensor) resistances at matched conditions or resonance.

Review on SAW RFID tags.

SAW tags were invented more than 30 years ago, but only today are the conditions united for mass application of this technology. The devices in the 2.4-GHz ISM band can be routinely produced with optical lithography, high-resolution radar systems can be built up using highly sophisticated, but low-cost RF-chips, and the Internet is available for global access to the tag databases.

Phase-step estimation in interferometry via an unscented Kalman filter.

We present an unscented Kalman filter to identify the phase step imparted to a piezoelectric transducer in phase shifting interferometry in the presence of Gaussian noise. The advantage of the proposed algorithm lies in its ability to determine the phase step values between -pi and pi rad without any prior calibration of the piezoelectric device. The algorithm is tested rigorously by using the simulated data in the presence of Gaussian distributed noise.

A microscopic view on acoustomigration.

Stress-induced material transport in surface acoustic wave devices, so-called acoustomigration, is a prominent failure mechanism, especially in high-power applications. We used scanning probe microscopy techniques to study acoustomigration of metal structures in-situ, i.e.

Wireless measurement of temperature using surface acoustic waves sensors.

Surface acoustic wave (SAW) devices can be used as wireless sensor elements, called SAW transponders, for measuring physical quantities such as temperature that do not need any power supply and may be accessed wirelessly. A complete wireless sensor system consists of one or more such SAW transponders and a local radar transceiver. The SAW transponder receives an RF burst in the VHF/UHF band transmitted by the radar transceiver.

Calculation and experimental verification of the acoustic stress at GHZ frequencies in SAW resonators.

High power applications of Surface Acoustic Wave (SAW) devices may lead to acoustomigration in their thin metal electrodes, which deteriorates the performance or may even destroy the SAW device. It is confirmed in this paper that the mechanism of acoustomigration is caused by the SAW-induced stress in the metal. The quantitative calculation of this stress will be shown in detail, starting from the widely used P-Matrix model as a standard analysis tool.