Gradient Hole Injection Inducing Efficient Exciton Recombination in Blue (475 nm) Perovskite QLEDs.

Perovskite quantum dots (QDs) are emerging as excellent light sources for light-emitting diodes (LEDs). However, the performance of blue perovskite QD-based LEDs (QLEDs) still lags behind that of red and green counterparts, which is hindered by blue perovskite QDs with broad bandgaps that tend to increase nonradiative recombination. Here, we designed a gradient energy for hole injection utilizing multiple hole injection layers (HTLs) combined with carbazole-based small-molecule modification to reduce the hole injection barrier between HTLs and QD layers and improve the hole injection efficiency, realizing efficient exciton recombination in blue perovskite QLEDs.

Designer bright and fast CsPbBr perovskite nanocrystal scintillators for high-speed X-ray imaging.

Bright and fast scintillators are highly crucial for high-speed X-ray imaging in the medical diagnostic radiology including angiography and cardiac computed tomography. The CsPbBr nanocrystal scintillator featuring a nanosecond radioluminescence decay time is a promising candidate. However, it suffers from a substantial photon self-absorption limiting the light output, and being bright and fast simultaneously is difficult.

Matched Electron-Transport Materials Enabling Efficient and Stable Perovskite Quantum-Dot-Based Light-Emitting Diodes.

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs), abbreviated as P-QLEDs have been regarded as significantly crucial emitters for lighting and displays. Efficient and stable P-QLEDs still lack ideal electron transport materials (ETM), which could efficiently block hole, transport electron, reduce interface non-radiative recombination and possess high thermal stability. Here, we report 2,4,6-Tris(3'-(pyridine-3-yl) biphenyl-3-yl)-1,3,5-triazine (TmPPPyTz, 3P) with strong electron-withdrawing moieties of pyridine and triazine to modulate the performance of P-QLEDs.

Boosting External Quantum Efficiency of Blue Perovskite QLEDs Exceeding 23% by Trifluoroacetate Passivation and Mixed Hole Transportation Design.

Perovskite quantum dot-based light-emitting diodes (QLEDs) have been considered a promising display technology due to their wide color gamut for authentic color expression. Currently, the external quantum efficiency (EQE) for state-of-the-art blue perovskite QLEDs is about 15%, which still lags behind its green and red counterparts (>25%) and blue film-based LEDs. Here, blue perovskite QLEDs that achieve an EQE of 23.

Polymer-Surface-Mediated Mechanochemical Reaction for Rapid and Scalable Manufacture of Perovskite QD Phosphors.

Perovskite quantum dots (QDs) have been considered new-generation emitters for lighting and displays due to their high photoluminescence (PL) efficiency, and pure color. However, their commercialization process is currently hindered by the challenge of mass production in a quick and environmentally friendly manner. In this study, a polymer-surface-mediated mechanochemical reaction (PMR) is proposed to prepare perovskite QDs using a high-speed multifunction grinder for the first time.

A ligand strategy retarding monovalent copper oxidation toward achieving CsCuI perovskite emitters with enhanced stability for lighting.

0D copper-based perovskites (CsCuI) have fascinating optical properties, such as strong exciton binding energy, high photoluminescence quantum yield (PLQY) and large Stokes shifts from self-trapped excitons (STEs), which make them highly considerable candidates in the field of lighting. However, the stability of CsCuI is compromised by the oxidation of Cu to Cu during the storage or operation process. Here, we proposed a ligand engineering strategy to improve the stability of CsCuI an organic molecule (ethylenediaminetetraacetic acid, EDTA) with multiple functional groups.

Fiber Optic Plate Coupled Pb-Free Perovskite X-ray Camera Featuring Low-Dose-Rate Imaging toward Dental Diagnosis.

Copper-based halide perovskites have been considered as promising scintillators. However, they still cannot meet the requirement of low-dose-rate X-ray imaging in medical diagnosis. Herein, we design a fiber optic plate (FOP) coupled perovskite X-ray camera to reduce the dose rate toward dental X-ray imaging.

Recent progress of single-halide perovskite nanocrystals for advanced displays.

Light-emitting diodes based on lead halide perovskite nanocrystals (LHP NCs) have shown an astonishing increase in efficiency in just several years of academic research, reaching high external quantum efficiencies exceeding 20%. The extensive color-tunability and narrow emission bandwidth of LHP NCs, in particular, are of great importance in the creation of the next generation of ultra-high-definition displays, as defined by the Rec. 2020 standard recommendation.

Perovskite light-emitting/detecting bifunctional fibres for wearable LiFi communication.

Light fidelity (LiFi), which is emerging as a compelling technology paradigm shifting the common means of high-capacity wireless communication technologies, requires wearable and full-duplex compact design because of its great significance in smart wearables as well as the 'Internet of Things'. However, the construction of the key component of wearable full-duplex LiFi, light-emitting/detecting bifunctional fibres, is still challenging because of the conflicting process between carrier separation and recombination, as well as the highly dynamic film-forming process. Here, we demonstrate light-emitting/detecting bifunctional fibres enabled by perovskite QDs with hybrid components.

A bilateral interfacial passivation strategy promoting efficiency and stability of perovskite quantum dot light-emitting diodes.

Perovskite quantum-dot-based light-emitting diodes (QLEDs) possess the features of wide gamut and real color expression, which have been considered as candidates for high-quality lightings and displays. However, massive defects are prone to be reproduced during the quantum dot (QD) film assembly, which would sorely affect carrier injection, transportation and recombination, and finally degrade QLED performances. Here, we propose a bilateral passivation strategy through passivating both top and bottom interfaces of QD film with organic molecules, which has drastically enhanced the efficiency and stability of perovskite QLEDs.

Histone-induced thrombotic thrombocytopenic purpura in zebrafish depends on von Willebrand factor.

Thrombotic thrombocytopenic purpura (TTP) is caused by severe deficiency of ADAMTS13 (A13), a plasma metalloprotease that cleaves endothelium-derived von Willebrand factor (VWF). However, severe A13 deficiency alone is often not sufficient to cause an acute TTP; additional factors may be required to trigger the disease. Using CRISPR/Cas9, we created and characterized several novel zebrafish lines carrying a null mutation in , , and both.

Self-template Synthesis of Metal Halide Perovskite Nanotubes as Functional Cavities for Tailored Optoelectronic Devices.

Intriguing optoelectronic features of low-dimensional perovskites drive researchers to develop novel nanostructures for exploring new photophysical properties and meeting the requirements of future practical applications. Here, we report the facile and universal synthesis of metal halide perovskite nanotubes (NTs) in a micro alkylammonium emulsion system for the first time. The [PbBr]-based NTs with a diameter of 300 nm and length of 100 μm were synthesized through the reaction of PbBr and long-chain bromide in advance, which can be controllably converted into general metal halide perovskite APbBr (A = Cs, FA, MA) with preserved tubular morphology by introducing the Cs, MA, and FA cations.

Synthesis of stable and phase-adjustable CsPbBr@CsPbBr nanocrystals novel anion-cation reactions.

All-inorganic cesium lead halide perovskites have emerged as promising semiconductor materials due to their preeminent performance in lighting, display, light detecting, and laser fields. However, the applications of lead halide perovskites are limited by the dissatisfactory stability owing to their fragile ionic crystal characteristics and highly dynamic surface-coordinated states. The diphase structure passivation possessing the same chemical constituents (such as passivating CsPbBr with CsPbBr) has been proven to be an effective way to improve the stabilities and simultaneously maintain the highly efficient luminescence properties.

Narrowband Perovskite Photodetector-Based Image Array for Potential Application in Artificial Vision.

Image sensor arrays are widely used in digital cameras, smartphones, and biorobots. However, most commercial image arrays rely on the dichroic prisms or a set of interference filters to distinguish characteristic color spectrum, which significantly increases the cost and fabrication processing complexity. In this work, an ultranarrow response photodetector with full-width at half-maximum being ∼12 nm and specific detectivity over 10 Jones at 545 nm are successfully achieved in CsPbBr polycrystalline films using freeze-drying casting method to adjust the surface-charge recombination.

Organic-Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48.

Perovskite quantum dots (QDs) with high photoluminescence quantum yields (PLQYs) and narrow emission peak hold promise for next-generation flexible and high-definition displays. However, perovskite QD films often suffer from low PLQYs due to the dynamic characteristics between the QD's surface and organic ligands and inefficient electrical transportation resulting from long hydrocarbon organic ligands as highly insulating barrier, which impair the ensuing device performance. Here, a general organic-inorganic hybrid ligand (OIHL) strategy is reported on to passivate perovskite QDs for highly efficient electroluminescent devices.

Room-Temperature Triple-Ligand Surface Engineering Synergistically Boosts Ink Stability, Recombination Dynamics, and Charge Injection toward EQE-11.6% Perovskite QLEDs.

Developing low-cost and high-quality quantum dots (QDs) or nanocrystals (NCs) and their corresponding efficient light-emitting diodes (LEDs) is crucial for the next-generation ultra-high-definition flexible displays. Here, there is a report on a room-temperature triple-ligand surface engineering strategy to play the synergistic role of short ligands of tetraoctylammonium bromide (TOAB), didodecyldimethylammonium bromide (DDAB), and octanoic acid (OTAc) toward "ideal" perovskite QDs with a high photoluminescence quantum yield (PLQY) of >90%, unity radiative decay in its intrinsic channel, stable ink characteristics, and effective charge injection and transportation in QD films, resulting in the highly efficient QD-based LEDs (QLEDs). Furthermore, the QD films with less nonradiative recombination centers exhibit improved PL properties with a PLQY of 61% through dopant engineering in A-site.

Double-Protected All-Inorganic Perovskite Nanocrystals by Crystalline Matrix and Silica for Triple-Modal Anti-Counterfeiting Codes.

Novel fluorescence with highly covert and reliable features is quite desirable to combat the sophisticated counterfeiters. Herein, we report a simultaneously triple-modal fluorescent characteristic of CsPbBr@CsPbBr/SiO by the excitation of thermal, ultraviolet (UV) and infrared (IR) light for the first time, which can be applied for the multiple modal anti-counterfeiting codes. The diphasic structure CsPbBr@CsPbBr nanocrystals (NCs) was synthesized via the typical reprecipitation method followed by uniformly encapsulation into silica microspheres.

An all-inkjet-printed flexible UV photodetector.

In this work, a novel concept of the all-inkjet-printed flexible photodetectors based on ZnO nanocrystals with high performance was proposed and demonstrated with emphasis on the influence of different post-treatments including UV light irradiation and high temperature annealing. The photodetectors based on UV-treated ZnO nanocrystal films exhibit a responsivity and an on/off ratio as high as 0.14 A W and >10, respectively, which are better than the thermally treated devices.

Constructing Mie-Scattering Porous Interface-Fused Perovskite Films to Synergistically Boost Light Harvesting and Carrier Transport.

Light harvesting (LH) and carrier transport abilities of a photoactive layer, which are both crucial for optoelectronic devices such as solar cells and photodetectors (PDs), are typically hard to be synergistically improved. Taking perovskite as an example, a freeze-drying recrystallization method is used to construct porous films with improvements of both LH and carrier transport ability. During the freeze-drying casting process, the rapid solvent evaporation produces massive pores, the sizes of which can be adjusted to exploit the Mie scattering for enhancement of the LH ability.

Nanowire-based transparent conductors for flexible electronics and optoelectronics.

As the necessary components for various modern electronic and optoelectronic devices, novel transparent electrodes (TEs) with the low cost, abundance features, and comparable performance of indium tin oxide (ITO) are inquired materials. Metal nanowires (NWs) with the excellent photoelectric properties as next-generation TE candidates have widely applications in smart optoelectronic devices such as electronic skins, wearable electronics, robotic skins, flexible and stretchable displays. This review describes the synthetic strategies for the preparation of metal NWs, the assemble process for metal NW films, and the practical aspects of metal NW films with the desired properties in various low-cost, flexible, and solution-based photoelectric devices.

50-Fold EQE Improvement up to 6.27% of Solution-Processed All-Inorganic Perovskite CsPbBr QLEDs via Surface Ligand Density Control.

Solution-processed CsPbBr quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement (up to 6.27%) are achieved through balancing surface passivation and carrier injection via ligand density control (treating with hexane/ethyl acetate mixed solvent), which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.

Improving All-Inorganic Perovskite Photodetectors by Preferred Orientation and Plasmonic Effect.

All-inorganic perovskites have high carrier mobility, long carrier diffusion length, excellent visible light absorption, and well overlapping with localized surface plasmon resonance (LSPR) of noble metal nanocrystals (NCs). The high-performance photodetectors can be constructed by means of the intrinsic outstanding photoelectric properties, especially plasma coupling. Here, for the first time, inorganic perovskite photodetectors are demonstrated with synergetic effect of preferred-orientation film and plasmonic with both high performance and solution process virtues, evidenced by 238% plasmonic enhancement factor and 10 on/off ratio.

Monolayer and Few-Layer All-Inorganic Perovskites as a New Family of Two-Dimensional Semiconductors for Printable Optoelectronic Devices.

Printed flexible photodetectors based on 2D inorganic perovskites with atomic thickness show excellent photosensing with fast rise and decay response times. As-synthesized nanosheets can easily be dispersed in various solvents, leading to large-area, crack-free, low-roughness, flexible films after printing. This study demonstrates that all-inorganic perovskite CsPbX3 nanosheets as a new class of 2D semiconductors have huge potential for flexible optoelectronic applications.

Quantum Dot Light-Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3 ).

Novel quantum-dot light-emitting diodes based on all-inorganic perovskite CsPbX3 (X = Cl, Br, I) nanocrystals are reported. The well-dispersed, single-crystal quantum dots (QDs) exhibit high quantum yields, and tunable light emission wavelength. The demonstration of these novel perovskite QDs opens a new avenue toward designing optoelectronic devices, such as displays, photodetectors, solar cells, and lasers.