Comparison of mechanical properties of 3D printer resins for occlusal splints using different models of 3D printers.

Background: Considering the development of new 3D printing technologies that use different printing techniques, further studies must be conducted to evaluate the impact of different printing systems on the mechanical properties of 3D-printed materials. This study aimed to evaluate the mechanical properties of 3D-printed materials for occlusal devices using different 3D printers and printing layer thicknesses.

Material And Methods: Ninety rectangular samples were manufactured and divided into nine groups according to the 3D printer model they were printed on (AnyCubic Mono X, Elegoo Mars 2, or FlashForge Hunter) and the layer thickness (20, 50, or 100 µm) and were subjected to superficial microhardness, flexural resistance, and elasticity modulus tests.

Quo vadis, esthetic dentistry? Part II: Composite resin overtreatment and social media appeal.

Objectives: This article presents case reports highlighting over-treatments with resin composites, often misconceived as minimally invasive procedures.

Clinical Considerations: Tooth-colored restorative materials, such as ceramics and composites, have found widespread application to correct problems related to tooth color, shape, and alignment. When composite resin is used, these procedures can be done in a very conservative, cost-effective, and timely fashion.

Iontophoresis use for increasing drug penetration into root canals and dentinal tubules: A proof-of-concept study.

Introduction: The success of endodontic treatment depends on the significant disinfection of the root canal system, its irregularities, and dentinal tubules. However, achieving complete disinfection remains challenging, with frequent failures and occurrence of secondary infections. Here, we propose using iontophoresis to increase the penetration and distribution of disinfecting agents into root canals, using methylene blue for proof-of-concept.

Influence of the combined effect of desensitizing dentifrices and universal adhesives on dentin bond strength under erosive conditions.

Objective: This study aimed to evaluate whether the use of desensitizing dentifrices containing obliterating agents can affect bond strength of eroded/abraded dentin.

Methodology: A total of 100 dentin samples were obtained from human molars. The teeth were cut into 3 mm-thickness discs and allocated in five groups (n=20), according to the toothpaste used: WoF - abrasion with fluoride-free toothpaste (Cocoricó); Arg - toothpaste containing arginine (Colgate Sensitive Pro-Relief); Nov - calcium sodium phosphosilicate toothpaste (Sensodyne Repair and Protect); SnF - fluoride-containing toothpaste (AmF/SnCl2/SnF2 - Elmex Erosion); and Control (no erosive/abrasive process).

Subjective versus objective, polymer bur-based selective carious tissue removal: 2-year randomized clinical trial.

Objectives: We aimed to compare subjective (S) selective carious tissue removal using hand instruments versus objective (O) removal using a self-limiting polymer bur in a single-blind cluster-randomized controlled superiority trial.

Methods: 115 children (aged 7-8 years) with ≥1 vital primary molar with a deep dentin lesion (>1/2 dentin depth) were included and randomized (60 S/55 O); all eligible molars in a child were treated identically (91 S/86 O). Cavities were prepared and carious tissue on pulpal walls selectively removed using hand instruments (S) or a self-limiting polymer bur (Polybur P1, Komet), followed by restoration using a glass hybrid material (Equia Forte, GC).

Disocclusion guides in occlusal splints on temporomandibular disorders and sleep bruxism: a systematic review.

Objective: To determine the best disocclusion guidance in occlusal splints (OSs) to manage and treat temporomandibular disorder (TMD) and sleep bruxism (SB).

Study Design: The research was conducted on 7 major electronic databases and 3 gray literature sources. We included randomized trials, nonrandomized clinical trials, and before-and-after studies.

Anti-inflammatory effect evaluation of naringenin and its incorporation into a chitosan-based film for transdermal delivery.

Naringenin is a bioflavonoid mainly found in citrus fruits. It presents many pharmacological benefits, including a remarkable anti-inflammatory activity, but its oral bioavailability is poor. To overcome this drawback, this work proposes a transdermal administration of such bioflavonoid, considering its use in the chronic treatment of inflammatory conditions.

Impact of dental treatment on the oral health-related quality of life of Brazilian schoolchildren.

This before-after experimental study evaluated the impact of dental treatment on the oral health-related quality of life (OHRQoL) in children aged 6-8 years from Paranoá, DF, considering the presence or absence of cavitated dentin carious lesions pre- and post-treatment. The responsiveness and sensitivity of the questionnaires were also investigated. Caries was detected by using the Caries Assessment Spectrum and Treatment (CAST) instrument, while the impact of oral health on the children's health-related quality of life was assessed using the Brazilian version of the Child Perceptions Questionnaire (CPQ8-10), which was completed by the children and the Brazilian version of the Early Childhood Oral Health Impact Scale (B-ECOHIS), which was completed by their parents.

Is there an association between dental caries, fluorosis, and molar-incisor hypomineralization?

Objective: This cross-sectional study aimed to determine the prevalence of dental caries, dental fluorosis, and molar-incisor hypomineralization, and their associations in a group of Brazilian schoolchildren.

Methodology: Adolescents (n=411) were evaluated by two calibrated examiners for dental caries (DC), dental fluorosis (DF), and molar-incisor hypomineralization (MIH) using the CAST (Caries Assessment Spectrum and Treatment) instrument, Thylstrup and Fejerskov (TF) index, and MIH Severity Scoring System (MIH-SSS), respectively. Descriptive statistics, chi-square tests, and logistic regression were used for statistical analysis.

Hydroxy acids for adhesion to enamel and dentin: Long-term bonding performance and effect on dentin biostability.

Objectives: To test the demineralization potential, bonding performance, and dentin biostability when using hydroxy acids for etching enamel and dentin.

Methods: Surface microhardness, roughness and depth of demineralization were investigated after etching enamel and dentin with 35 % glycolic acid (Gly), tartaric acid (Ta), gluconic acid (Glu), gluconolactone (Gln), or phosphoric acid (Pa) (n = 5/group). Dentin microtensile bond strength (μTBS) after 24 h or 1 year of bonding (n = 8 teeth/group) and enamel shear bond strength (SBS) after 24 h (n = 10 teeth/group) were obtained.

Are Brazilian dentists and dental students using the ICCC recommendations for caries management?

The aim of this study was to evaluate whether dentists and dental undergraduate students know the terminology of the International Caries Consensus Collaboration (ICCC), and make their restorative treatment decisions regarding carious tissue removal accordingly. Data collection was performed using an electronic questionnaire, considering: a) profile of the respondent; b) analysis of four clinical cases with respect to possible management strategies; and c) questions on cariology field terminology. Sample size consisted of 175 dentists and 66 last semester dental students.

Subjective versus objective, polymer bur-based selective carious tissue removal: 1-year interim analysis of a randomized clinical trial.

We aimed to compare subjective (S) vs. objective (O) selective carious tissue removal using hand-excavation versus a self-limiting polymer bur, respectively. A community-based single-blind cluster-randomized controlled superiority trial was performed.

Selective carious tissue removal using subjective criteria or polymer bur: study protocol for a randomised controlled trial (SelecCT).

Introduction: Selective (incomplete/partial) carious tissue removal is suitable for treating deep carious lesions in teeth with vital, asymptomatic pulps. In the periphery of a cavity, removal to hard dentin is performed, while in pulpo-proximal areas, leathery or soft dentin is left to avoid pulp exposure. As the decision of what contains 'soft' or 'leathery' dentin is subjective, using self-limiting burs which help to standardise the hardness of the remaining dentin, has been suggested to increase the reliability of carious tissue removal.

Oral health and school performance in a group of schoolchildren from the Federal District, Brazil.

Objectives: To evaluate whether an association exists between school performance, quality of life, dental caries, and dental pain in children between 6 and 8 years of age.

Methods: All 6- to 8-year-old children enrolled in the second year of the six public schools in Paranoá-FD were invited to participate in this cross-sectional study. In total, 374 consented.

Retention rates and caries-preventive effects of two different sealant materials: a randomised clinical trial.

Objectives: The aim of this study was to compare the caries-preventive effect and the retention rates of sealants prepared with a new modified and a high-viscosity glass-ionomer cement (GIC) in recently erupted first permanent molars.  MATERIALS AND METHODS: Fifty-six children (224 teeth) were included in a split-mouth randomised clinical trial. All children had their four first permanent molars sealed with either Clinpro XT Varnish (CXT) or Fuji IX GP FAST (FJ).

Long-term Effect of Supervised Toothbrushing on Levels of Plaque and Gingival Bleeding Among Schoolchildren.

Purpose: To test the hypothesis that, in high caries-risk children, supervised toothbrushing (STB) reduces visible plaque levels and gingival bleeding to a greater extent than does unsupervised toothbrushing (USTB) in comparable children and in low caries-risk USTB children over 4 years.

Materials And Methods: High caries-risk schoolchildren, ages 6 to 7, were allocated to three oral healthcare protocols using a cluster-randomised design: 1. Ultra-Conservative Treatment (UCT): small cavities in primary molars were restored using ART, while medium and large cavities were left open and cleaned under daily supervised toothbrushing together with the remaining dentition (UCT/STB); 2.

Comparative bonding ability to dentin of a universal adhesive system and monomer conversion as functions of extended light curing times and storage.

Objectives: The purpose of this in vitro study was to evaluate the bonding ability and monomer conversion of a universal adhesive system applied to dentin as functions of different curing times and storage. The results were compared among a variety of commercial adhesives.

Materials And Methods: Flat superficial dentin surfaces were exposed on human molars and assigned into one of the following adhesives (n = 15): total-etch Adper Single Bond 2 (SB) and Optibond Solo Plus (OS), self-etch Optibond All in One (OA) and Clearfil SE Bond (CSE), and Scotchbond Universal Adhesive in self-etch mode (SU).

3-year survival rates of retained composite resin and ART sealants using two assessment criteria.

The aim was to test the null-hypothesis that there is no difference in the cumulative survival rate of retained composite resin (CR) sealants and a high-viscosity glass-ionomer Atraumatic Restorative Treatment (ART) sealant in first permanent molars calculated according to the traditional and the modified retention assessment criteria over a period of 3 years. This cluster-randomized controlled clinical trial consisted of 123 schoolchildren, 6-7-years-old. At baseline, high-caries risk pits and fissures of fully erupted first permanent molars were treated with CR and ART sealants.

Soft tissue cone beam computed tomography (ST-CBCT) for the planning of esthetic crown lengthening procedures.

Objective: The aim of this study was to measure the clinical crown, anatomical crown, and amount of gingiva covering the enamel of anterior maxillary teeth with soft tissue cone beam computed tomography (ST-CBCT) and thus propose a protocol for the application of this noninvasive method for the planning of esthetic crown lengthening procedures to prevent undesired root exposure.

Materials And Methods: Ten young patients (mean age 22.8 years) requiring esthetic crown lengthening surgeries but not restorative procedures were included in this study.

Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras.

Statement Of Problem: The precision of fit of chairside computer-aided design and computer-aided manufacturing (CAD-CAM) complete crowns is affected by digital impression and restorative material.

Purpose: The purpose of this in vitro study was to evaluate by microcomputed tomography (μCT) the marginal and internal adaptation of composite resin and ceramic complete crowns fabricated with 2 different intraoral cameras and 2 restorative materials.

Material And Methods: Ten extracted human third molars received crown preparations.

A study on the survival of primary molars with intact and with defective restorations.

Background: Failed restorations in primary teeth are not always re-restored. Is re-restoration not required anymore?

Objective: To compare survival rates of primary molars with intact and defective amalgam and ART restorations.

Methods: A total of 649 restored primary molars, of which 162 were assessed with defective restorations for mechanical reasons, from a cluster-randomised controlled clinical trial, were followed up over a period of 3.

Cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time.

This in vitro study evaluated in fibroblast cultures the direct cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Paper discs were impregnated with adhesives and light-cured (10, 20 or 40 s). The discs were then immersed in culture medium to obtain the eluates for the experimental groups (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal).