Poly(vinylidene fluoride) Aerogels with α, β, and γ Crystalline Forms: Correlating Physicochemical Properties with Polymorphic Structures.

Strategic customization of crystalline forms of poly(vinylidene fluoride) (PVDF) aerogels is of great importance for a variety of applications, from energy harvesters to thermal and acoustic insulation. Here, we report sustainable strategies to prepare crystalline pure α, β, and γ forms of PVDF aerogels from their respective gels using a solvent exchange strategy with green solvents, followed by a freeze-drying technique. The crucial aspect of this process was the meticulous choice of appropriate solvents to enable the formation of thermoreversible gels of PVDF by crystallization-induced gelation.

High Thermoelectric Power Factor of Poly(3-hexylthiophene) through In-Plane Alignment and Doping with a Molybdenum Dithiolene Complex.

We report a record thermoelectric power factor of up to 160 μW m K for the conjugated polymer poly(3-hexylthiophene) (P3HT). This result is achieved through the combination of high-temperature rubbing of thin films together with the use of a large molybdenum dithiolene p-dopant with a high electron affinity. Comparison of the UV-vis-NIR spectra of the chemically doped samples to electrochemically oxidized material reveals an oxidation level of 10%, i.

Effect of Alkyl Side Chain Length on Doping Kinetics, Thermopower, and Charge Transport Properties in Highly Oriented FTCNQ-Doped PBTTT Films.

Doping of polymer semiconductors such as poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2- b]thiophene) (PBTTT) with acceptor molecules such as 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (FTCNQ) is widely used to tune the charge transport and thermoelectric (TE) properties in thin films. However, the mechanism of dopant insertion in the polymer matrix, insertion kinetics, and the ultimate doping levels reached have been investigated only marginally. This contribution addresses the effect of alkyl side chain length on the doping mechanism of a series of PBTTTs with linear side chains ranging from n-octyl to n-octyldecyl.

Supramolecular organization of a H-bonded perylene bisimide organogelator determined by transmission electron microscopy, grazing incidence X-ray diffraction and polarized infra-red spectroscopy.

An organogelator based on a N,N'-substituted H-bonding perylenebisimide (PBI-C10) self-assembles to form either a green J-type (form I) or a red H-type (form II) aggregate structure. The molecular packing of both polymorphs was determined from a combination of Transmission Electron Microscopy (TEM) (low dose electron diffraction and high resolution), Grazing incidence X-ray diffraction and polarized infrared spectroscopy. To that aim, highly oriented films have been prepared by mechanical rubbing at controlled film temperature and DFT calculations were performed to identify representative vibrational IR bands and their associated polarizations.

High-resolution noncontact AFM and Kelvin probe force microscopy investigations of self-assembled photovoltaic donor-acceptor dyads.

Self-assembled donor-acceptor dyads are used as model nanostructured heterojunctions for local investigations by noncontact atomic force microscopy (nc-AFM) and Kelvin probe force microscopy (KPFM). With the aim to probe the photo-induced charge carrier generation, thin films deposited on transparent indium tin oxide substrates are investigated in dark conditions and upon illumination. The topographic and contact potential difference (CPD) images taken under dark conditions are analysed in view of the results of complementary transmission electron microscopy (TEM) experiments.

Organic Photovoltaics: More than Ever, an Interdisciplinary Field.

Despite the growing interest and rapid advancement of alternative photovoltaic (PV) technologies such as perovskite based PV devices, we still believe that organic photovoltaic (OPV) devices have a significant potential for stable, low-cost solar power generation. [..

Polaron stability in semiconducting polymer neat films.

We describe a spectroelectrochemical approach to accelerated electrochemical stability studies of conjugated polymers under oxidative stress. The polaron stabilities of alternating copolymers based on (i) thiophene and thiazole, namely PTTz, and (ii) bithiophene and thiazole, namely PTTTz, are compared in neat films with that of P3HT. P3HT is found to be the most stable whilst PTTz is found to be the least stable.

Perylenediimide-based donor-acceptor dyads and triads: impact of molecular architecture on self-assembling properties.

Perylenediimide-based donor-acceptor co-oligomers are particularly attractive in plastic electronics because of their unique electro-active properties that can be tuned by proper chemical engineering. Herein, a new class of co-oligomers has been synthesized with a dyad structure (AD) or a triad structure (DAD and ADA) in order to understand the correlations between the co-oligomer molecular architecture and the structures formed by self-assembly in thin films. The acceptor block A is a perylene tetracarboxyl diimide (PDI), whereas the donor block D is made of a combination of thiophene, fluorene, and 2,1,3-benzothiadiazole derivatives.

Orienting semi-conducting π-conjugated polymers.

The present review focuses on the recent progress made in thin film orientation of semi-conducting polymers with particular emphasis on methods using epitaxy and shear forces. The main results reported in this review deal with regioregular poly(3-alkylthiophene)s and poly(dialkylfluorenes). Correlations existing between processing conditions, macromolecular parameters and the resulting structures formed in thin films are underlined.

BPTs: thiophene-flanked benzodipyrrolidone conjugated polymers for ambipolar organic transistors.

A series of novel thiophene-flanked benzodipyrrolidone (BPT)-based alternating copolymers are synthesised, their optical and electrical properties evaluated. The BPT unit promotes a conjugated, planar polymer backbone, with a low bandgap, primarily due to low lying LUMO energy levels. Copolymerisation with thiophene exhibits well balanced ambipolar organic field-effect transistor performance, with electron and hole mobilities 0.

Synthesis of novel thieno[3,2-b]thienobis(silolothiophene) based low bandgap polymers for organic photovoltaics.

Thieno[3,2-b]thienobis(silolothiophene), a new electron rich hexacyclic monomer has been synthesized and incorporated into three novel donor-acceptor low-bandgap polymers. By carefully choosing the acceptor co-monomer, the energy levels of the polymers could be modulated and high power conversion efficiencies of 5.52% were reached in OPV devices.

Design of semiconducting indacenodithiophene polymers for high performance transistors and solar cells.

The prospect of using low cost, high throughput material deposition processes to fabricate organic circuitry and solar cells continues to drive research towards improving the performance of the semiconducting materials utilized in these devices. Conjugated aromatic polymers have emerged as a leading candidate semiconductor material class, due to their combination of their amenability to processing and reasonable electrical and optical performance. Challenges remain, however, to further improve the charge carrier mobility of the polymers for transistor applications and the power conversion efficiency for solar cells.

Electronic Properties and Photovoltaic Performances of a Series of Oligothiophene Copolymers Incorporating Both Thieno[3,2-b]thiophene and 2,1,3-Benzothiadiazole Moieties.

A series of donor-acceptor alternated conjugated copolymers, composed of thiophene, bithiophene, thieno[3,2-b]thiophene, and 2,1,3-benzothiadiazole units and differing from each other by the nature and the number of 3-alkylthiophene in the backbone, have been synthesized by Stille cross-coupling polymerization. The material's optical and electrochemical properties, in solution and in thin films, have been investigated using UV-Visible absorption and cyclic voltammetry. Bulk heterojunction solar cells using blends of the newly synthesized copolymers, as electron donor, and C60-PCBM or C70-PCBM, as electron transporting material, have been elaborated.