Plasmon-Exciton Strong Coupling in Single-Molecule Junction Electroluminescence.

Single molecules bridging two metallic electrodes can emit light through electroluminescence when subjected to a bias voltage. Typically, light emission in such devices results from transitions between molecular states, although in the presence of light-matter coupling, the emission can result from a transition between hybrid light-matter states. Here, we create single metal-molecule-metal junctions and simultaneously collect conductance and electroluminescence data using a scanning tunneling microscope (STM) equipped with a custom spectrometer.

Evaluating the Ability of External Electric Fields to Accelerate Reactions in Solution.

This study investigates the catalytic effects of external electric fields (EEFs) on two reactions in solution: the Menshutkin reaction and the Chapman rearrangement. Utilizing a scanning tunneling microscope-based break-junction (STM-BJ) setup and monitoring reaction rates through high-performance liquid chromatography connected to a UV detector (HPLC-UV) and ultraperformance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-q-ToF-MS), we observed no rate enhancement for either reaction under ambient conditions. Density functional theory (DFT) calculations indicate that electric field-induced changes in reactant orientation and the minimization of activation energy are crucial factors in determining the efficacy of EEF-driven catalysis.

Impact of Solvent Electrostatic Environment on Molecular Junctions Probed via Electrochemical Impedance Spectroscopy.

The electrostatic environment around nanoscale molecular junctions modulates charge transport; solvents alter this environment. Methods to directly probe solvent effects require correlating measurements of the local electrostatic environment with charge transport across the metal-molecule-metal junction. Here, we measure the conductance and current-voltage characteristics of molecular wires using a scanning tunneling microscope-break junction (STM-BJ) setup in two commonly used solvents.

Long-Range Gating in Single-Molecule One-Dimensional Topological Insulators.

Single-molecule one-dimensional topological insulator (1D TI) is a class of molecular wires that exhibit increasing conductance with wire length. This unique trend is due to the coupling between the two low-lying topological edge states of 1D TIs described by the Su-Schrieffer-Heeger model. In principle, this quantum phenomenon within 1D TIs can be utilized to achieve long-range gating in molecular conductors.

Photooxidation driven formation of Fe-Au linked ferrocene-based single-molecule junctions.

Metal-metal contacts, though not yet widely realized, may provide exciting opportunities to serve as tunable and functional interfaces in single-molecule devices. One of the simplest components which might facilitate such binding interactions is the ferrocene group. Notably, direct bonds between the ferrocene iron center and metals such as Pd or Co have been demonstrated in molecular complexes comprising coordinating ligands attached to the cyclopentadienyl rings.

Determining Transmission Characteristics from Shot-Noise-Driven Electroluminescence in Single-Molecule Junctions.

Biased metal-molecule-metal junctions emit light through electroluminescence, a phenomenon at the intersection of molecular electronics and nanoplasmonics. This can occur when the junction plasmon mode is excited by inelastic electron current fluctuations. Here, we simultaneously measure the conductance and electroluminescence intensity from single-molecule junctions with time resolution in a solution environment at room temperature.

Effective Gating in Single-Molecule Junctions through Fano Resonances.

The successful incorporation of molecules as active circuit elements relies on the ability to tune their electronic properties through chemical design. A synthetic strategy that has been used to manipulate and gate circuit conductance involves attaching a pendant substituent along the molecular conduction pathway. However, such a chemical gate has not yet been shown to significantly modify conductance.

Solvent-Mediated Modulation of the Au-S Bond in Dithiol Molecular Junctions.

Gold-dithiol molecular junctions have been studied both experimentally and theoretically. However, the nature of the gold-thiolate bond as it relates to the solvent has seldom been investigated. It is known that solvents can impact the electronic structure of single-molecule junctions, but the correlation between the solvent and dithiol-linked single-molecule junction conductance is not well understood.

Radical Single-Molecule Junctions.

Radicals are unique molecular systems for applications in electronic devices due to their open-shell electronic structures. Radicals can function as good electrical conductors and switches in molecular circuits while also holding great promise in the field of molecular spintronics. However, it is both challenging to create stable, persistent radicals and to understand their properties in molecular junctions.

Designing Long and Highly Conducting Molecular Wires with Multiple Nontrivial Topological States.

Molecular one-dimensional topological insulators (1D TIs), described by the Su-Schrieffer-Heeger (SSH) model, are a new class of molecular electronic wires whose low-energy topological edge states endow them with high electrical conductivity. However, when these 1D TIs become long, the high conductance is not sustained because the coupling between the edge states decreases with increasing length. Here, we present a new design where we connect multiple short 1D SSH TI units linearly or in a cycle to create molecular wires with a continuous topological state density.

Alkane Solvent-Derived Acylation Reaction Driven by Electric Fields.

Electric field acceleration of alkyl hydroperoxide activation to acylate amines in the scanning tunneling microscope-based break-junction is reported. Alkyl hydroperoxide mixtures, generated from hydrocarbon autoxidation in air, were found to be competent reagents for the functionalization of gold surfaces. Intermolecular coupling on the surface in the presence of amines was observed, yielding normal alkylamides.

Electric fields drive bond homolysis.

Electric fields have been used to control and direct chemical reactions in biochemistry and enzymatic catalysis, yet directly applying external electric fields to activate reactions in bulk solution and to characterize them remains a challenge. Here we utilize the scanning tunneling microscope-based break-junction technique to investigate the electric field driven homolytic cleavage of the radical initiator 4-(methylthio)benzoic peroxyanhydride at ambient temperatures in bulk solution, without the use of co-initiators or photochemical activators. Through time-dependent quantification by high performance liquid chromatography using a UV-vis detector, we find that the electric field catalyzes the reaction.

Topological Radical Pairs Produce Ultrahigh Conductance in Long Molecular Wires.

Molecular one-dimensional topological insulators (1D TIs), which conduct through energetically low-lying topological edge states, can be extremely highly conducting and exhibit a reversed conductance decay, affording them great potential as building blocks for nanoelectronic devices. However, these properties can only be observed at the short length limit. To extend the length at which these anomalous effects can be observed, we design topological oligo[]emeraldine wires using short 1D TIs as building blocks.

Voltage-Modulated van der Waals Interaction in Single-Molecule Junctions.

Understanding how molecular geometry affects the electronic properties of single-molecule junctions experimentally has been challenging. Typically, metal-molecule-metal junctions are measured using a break-junction method where electrode separation is mechanically evolving during measurement. Here, to probe the impact of the junction geometry on conductance, we apply a sinusoidal modulation to the molecular junction electrode position.

Interfacial electric fields catalyze Ullmann coupling reactions on gold surfaces.

The electric fields created at solid-liquid interfaces are important in heterogeneous catalysis. Here we describe the Ullmann coupling of aryl iodides on rough gold surfaces, which we monitor using the scanning tunneling microscope-based break junction (STM-BJ) and using mass spectrometry and fluorescence spectroscopy. We find that this Ullmann coupling reaction occurs only on rough gold surfaces in polar solvents, the latter of which implicates interfacial electric fields.

Correction: Electric-field-induced coupling of aryl iodides with a nickel(0) complex.

Correction for 'Electric-field-induced coupling of aryl iodides with a nickel(0) complex' by Nicholas M. Orchanian , , 2022, https://doi.org/10.

Electric-field-induced coupling of aryl iodides with a nickel(0) complex.

The formation of carbon-carbon bonds with transition metal reagents serves as a cornerstone of organic synthesis. Here, we show that the reactivity of an otherwise kinetically inert transition metal complex can be induced by an external electric field to affect a coupling reaction. These results highlight the importance of electric field effects in reaction chemistry and offers a new strategy to modulate organometallic reactivity.

Reversed Conductance Decay of 1D Topological Insulators by Tight-Binding Analysis.

Reversed conductance decay describes increasing conductance of a molecular chain series with increasing chain length. Realizing reversed conductance decay is an important step toward making long and highly conducting molecular wires. Recent work has shown that one-dimensional topological insulators (1D TIs) can exhibit reversed conductance decay due to their nontrivial edge states.

Highly conducting single-molecule topological insulators based on mono- and di-radical cations.

Single-molecule topological insulators are promising candidates as conducting wires over nanometre length scales. A key advantage is their ability to exhibit quasi-metallic transport, in contrast to conjugated molecular wires which typically exhibit a low conductance that decays as the wire length increases. Here, we study a family of oligophenylene-bridged bis(triarylamines) with tunable and stable mono- or di-radicaloid character.

Increased Molecular Conductance in Oligo[]phenylene Wires by Thermally Enhanced Dihedral Planarization.

Coherent tunneling electron transport through molecular wires has been theoretically established as a temperature-independent process. Although several experimental studies have shown counter examples, robust models to describe this temperature dependence have not been thoroughly developed. Here, we demonstrate that dynamic molecular structures lead to temperature-dependent conductance within coherent tunneling regime.

π-Conjugated redox-active two-dimensional polymers as organic cathode materials.

Redox-active two-dimensional polymers (RA-2DPs) are promising lithium battery organic cathode materials due to their regular porosities and high chemical stabilities. However, weak electrical conductivities inherent to the non-conjugated molecular motifs used thus far limit device performance and the practical relevance of these materials. We herein address this problem by developing a modular approach to construct π-conjugated RA-2DPs with a new polycyclic aromatic redox-active building block PDI-DA.

Theory of Chirality Induced Spin Selectivity: Progress and Challenges.

A critical overview of the theory of the chirality-induced spin selectivity (CISS) effect, that is, phenomena in which the chirality of molecular species imparts significant spin selectivity to various electron processes, is provided. Based on discussions in a recently held workshop, and further work published since, the status of CISS effects-in electron transmission, electron transport, and chemical reactions-is reviewed. For each, a detailed discussion of the state-of-the-art in theoretical understanding is provided and remaining challenges and research opportunities are identified.

Single-Molecule Junction Formation in Break-Junction Measurements.

The scanning tunneling microscope-based break-junction (STM-BJ) technique is the most common method used to study the electronic properties of single-molecule junctions. It relies on repeatedly forming and rupturing a Au contact in an environment of the target molecules. The probability of junction formation is typically very high (∼70-95%), prompting questions relating to how the nanoscale structure of the Au electrode before the metal point contact ruptures alters junction formation.

A single-molecule blueprint for synthesis.

Chemical reactions that occur at nanostructured electrodes have garnered widespread interest because of their potential applications in fields including nanotechnology, green chemistry and fundamental physical organic chemistry. Much of our present understanding of these reactions comes from probes that interrogate ensembles of molecules undergoing various stages of the transformation concurrently. Exquisite control over single-molecule reactivity lets us construct new molecules and further our understanding of nanoscale chemical phenomena.