Biocompatibility of variable thicknesses of a novel directly printed aligner in orthodontics.

Direct printed aligners (DPAs) offer benefits like the ability to vary layer thickness within a single DPA and to 3D print custom-made removable orthodontic appliances. The biocompatibility of appliances made from Tera Harz TA-28 (Graphy Inc., Seoul, South Korea) depends on strict adherence to a standardized production and post-production protocol, including UV curing.

M.I.N.I.-KID interviews with adolescents: a corpus-based language analysis of adolescents with depressive disorders and the possibilities of continuation using Chat GPT.

Background: Up to 13% of adolescents suffer from depressive disorders. Despite the high psychological burden, adolescents rarely decide to contact child and adolescent psychiatric services. To provide a low-barrier alternative, our long-term goal is to develop a chatbot for early identification of depressive symptoms.

Directly printed aligner therapy: A 12-month evaluation of application and effectiveness.

Introduction: Directly printed aligners (DPAs) are gaining in popularity, potentially streamlining manufacturing, decreasing environmental waste, and offering enhanced adaptation and tailoring. This transition has been facilitated by advances in materials, software, and production. Although DPAs may have enhanced versatility and application in the management of more complex malocclusions, there is little research evaluating their effectiveness.

The importance of tyrosines in multimers of cyclic RGD nonapeptides: towards αvβ6-integrin targeted radiotherapeutics.

In a recent paper in this journal (, 2023, , 2429), we described an unusually strong impact of regiospecific exchange of phenylalanines by tyrosines in 10 gallium-68-labeled trimers of certain cyclic RGD peptides, c[XRGDLAXp(Me)K] (X = F or Y), on non-specific organ uptakes. We found that there was, in part, no correlation of liver uptake with established polarity proxies, such as the octanol-water distribution coefficient (log ). Since this observation could not be explained straightforwardly, we suggested that the symmetry of the compounds had resulted in a synergistic interaction of certain components of the macromolecules.

Immunoprotection Strategies in β-Cell Replacement Therapy: A Closer Look at Porcine Islet Xenotransplantation.

Type 1 diabetes mellitus (T1DM) is characterized by absolute insulin deficiency primarily due to autoimmune destruction of pancreatic β-cells. The prevailing treatment for T1DM involves daily subcutaneous insulin injections, but a substantial proportion of patients face challenges such as severe hypoglycemic episodes and poorly controlled hyperglycemia. For T1DM patients, a more effective therapeutic option involves the replacement of β-cells through allogeneic transplantation of either the entire pancreas or isolated pancreatic islets.

Effect of post-printing curing time on cytotoxicity of direct printed aligners: A pilot study.

Introduction: The aim of this in vitro study was to examine the potential impact of different curing times of 3D-printed orthodontic aligners on their cytotoxicity.

Method: Some 60 samples of aligner material were directly 3D printed using Tera Harz TC-85 DAC resin and randomly allocated to three different curing time groups (14, 24 and 50 min). Zendura FLX samples were used as control.

Using DFT on ultrasound measurements to determine patient-specific blood flow boundary conditions for computational hemodynamics of intracranial aneurysms.

Boundary conditions (BCs) is one pivotal factor influencing the accuracy of hemodynamic predictions on intracranial aneurysms (IAs) using computational fluid dynamics (CFD) modeling. Unfortunately, a standard procedure to secure accurate BCs for hemodynamic modeling does not exist. To bridge such a knowledge gap, two representative patient-specific IA models (Case-I and Case-II) were reconstructed and their blood flow velocity waveforms in the internal carotid artery (ICA) were measured by ultrasonic techniques and modeled by discrete Fourier transform (DFT).

Transfer accuracy of 3D printed versus CAD/CAM milled surgical guides for temporary orthodontic implants: A preclinical micro CT study.

Objectives: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial.

Methods: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides.

Midpalatal miniscrew insertion: The accuracy of digital planning and surgical placement.

Introduction: The objective of this study was to investigate the accuracy of palatal miniscrew insertion, evaluating the effect of guide fabrication and surgical placement.

Methods: Guided insertion of bilateral paramedian palatal miniscrews was undertaken using Appliance Designer software (3Shape, Copenhagen, Denmark). A resin surgical guide (P Pro Surgical Guide; Straumann AG, Basel, Switzerland) was used.

An in vitro comparison of the dimensional stability of four 3D-printed models under various storage conditions.

Objectives: To investigate the dimensional stability of various 3D-printed models derived from resin and plant-based, biodegradable plastics (PLA) under specific storage conditions for a period of up to 21 weeks.

Materials And Methods: Four different printing materials, including Draft V2, study model 2, and Ortho model OD01 resins as well as PLA mineral, were evaluated over a 21-week period. Eighty 3D-printed models were divided equally into two groups, with one group stored in darkness and the other exposed to daylight.

Performance of dental students, orthodontic residents, and orthodontists for classification of midpalatal suture maturation stages on cone-beam computed tomography scans - a preliminary study.

Background: Assessment of midpalatal suture maturation on cone-beam computed tomography (CBCT) scans is performed by visual inspection and is therefore subjective. The extent to which the assessment of midpalatal suture maturation is affected by rater experience has not been adequately explored in the existing literature, thus limiting the availability of evidence-based findings. This study compared the outcomes of classification by dental students, orthodontic residents, and orthodontists.

The Adrenal Gland and Pancreatic Islets - A Beneficial Endocrine Alliance.

Intraportal islet transplantation in patients with type 1 diabetes enables restoration of glucose-regulated insulin secretion. However, several factors hamper a widespread application and long-term success: chronic hypoxia, an inappropriate microenvironment and suppression of regenerative and proliferative potential by high local levels of immunosuppressive agents. Therefore, the identification of alternative and superior transplant sites is of major scientific and clinical interest.

N-Terminal Proline Editing for the Synthesis of Peptides with Mercaptoproline and Selenoproline: Mechanistic Insights Lead to Greater Efficiency in Proline Native Chemical Ligation.

Native chemical ligation (NCL) at proline has been limited by cost and synthetic access. In addition, prior examples of NCL using mercaptoproline have exhibited stalling of the reaction after thioester exchange, due to inefficient → acyl transfer. Herein, we develop methods, using inexpensive Boc-4-hydroxyproline, for the solid-phase synthesis of peptides containing N-terminal 4-mercaptoproline and 4-selenoproline.

Regulation of multiple signaling pathways promotes the consistent expansion of human pancreatic progenitors in defined conditions.

The unlimited expansion of human progenitor cells in vitro could unlock many prospects for regenerative medicine. However, it remains an important challenge as it requires the decoupling of the mechanisms supporting progenitor self-renewal and expansion from those mechanisms promoting their differentiation. This study focuses on the expansion of human pluripotent stem (hPS) cell-derived pancreatic progenitors (PP) to advance novel therapies for diabetes.

An observed population of intermediate-mass helium stars that have been stripped in binaries.

The hydrogen-rich outer layers of massive stars can be removed by interactions with a binary companion. Theoretical models predict that this stripping produces a population of hot helium stars of ~2 to 8 solar masses (), however, only one such system has been identified thus far. We used ultraviolet photometry to identify potential stripped helium stars then investigated 25 of them using optical spectroscopy.

Generation of glucocorticoid-producing cells derived from human pluripotent stem cells.

Adrenal insufficiency is a life-threatening condition resulting from the inability to produce adrenal hormones in a dose- and time-dependent manner. Establishing a cell-based therapy would provide a physiologically responsive approach for the treatment of this condition. We report the generation of large numbers of human-induced steroidogenic cells (hiSCs) from human pluripotent stem cells (hPSCs).

The Incidence Trend and Management of Thyroid Cancer-What Has Changed in the Past Years: Own Experience and Literature Review.

Because of ambiguous and widely debated observations concerning the incidence, trend, and management of TC, we performed this analysis. We drew attention to some events, such as "cancer screening activity", introduction of noninvasive follicular neoplasm with papillary-like nuclear features (NIFTP) to TC types, possibility of papillary thyroid microcarcinoma (PTMC) active surveillance (AS), occurrence of personalized medicine in TC management, and, finally, COVID-19 pandemic time. Because of the opinion that all changes have been made mostly by PTC, we compared it to the remaining types of TC in terms of incidence, clinical and pathological characteristics, and treatment.

Nitrogen deposition raises temperature sensitivity of soil organic matter decomposition in subtropical forest.

Subtropical ecosystems are strongly affected by nitrogen (N) deposition, impacting soil organic matter (SOM) availability and stocks. Here we aimed to reveal the effects of N deposition on i) the structure and functioning of microbial communities and ii) the temperature sensitivity (Q) of SOM decomposition. Phosphorus (P) limited evergreen forest in Guangdong Province, southeastern China, was selected, and N deposition (factor level: N (100 kg N ha y (NHNO)) and control (water), arranged into randomized complete block design (n = 3)) was performed during 2.

Molecular View on the RGD Peptide Binding Mechanism: Implications for Integrin Activity and Selectivity Profiles.

Receptor-selective peptides are widely used as smart carriers for specific tumor-targeted delivery. A remarkable example is the cyclic nonapeptide RGD (CRGDKPGDC, ) that couples intrinsic cytotoxic effects with striking tumor-homing properties. These peculiar features are based on a rather complex multistep mechanism of action, where the primary event is the recognition of RGD integrins.