Challenges of arsenic removal from municipal wastewater by coagulation with ferric chloride and alum.

Discharge of treated municipal wastewater containing arsenic (As) may cause adverse effects on the environment and drinking water sources. Arsenic concentrations were measured throughout the treatment systems at two municipal wastewater plants in New Jersey, USA. The efficiency of As removal by ferric chloride and alum coagulants were evaluated.

Removal of arsenate from water by adsorbents: a comparative case study.

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO₂). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents.

Rapid Ti(III) reduction of perchlorate in the presence of beta-alanine: kinetics, pH effect, complex formation, and beta-alanine effect.

Ti(III) reduction of perchlorate might be a useful method for the treatment of highly perchlorate-contaminated water. Though the reaction rate was usually low, we observed that beta-alanine (HOOCCH(2)CH(2)NH(2)) could significantly promote the reaction. A complete (>99.

Modeling, rate-limiting step investigation, and enhancement of the direct bio-regeneration of perchlorate laden anion-exchange resin.

Anion-exchange with high perchlorate affinity resins is one of the most promising technologies for removing low levels of perchlorate. However, the traditional brine desorption technique is difficult and costly for regeneration of this type of resin. Previously, a direct bio-regeneration method by contacting the spent high perchlorate affinity resin with the perchlorate-reducing bacteria was proved feasible.

Perchlorate adsorption and desorption on activated carbon and anion exchange resin.

The mechanisms of perchlorate adsorption on activated carbon (AC) and anion exchange resin (SR-7 resin) were investigated using Raman, FTIR, and zeta potential analyses. Batch adsorption and desorption results demonstrated that the adsorption of perchlorate by AC and SR-7 resin was reversible. The reversibility of perchlorate adsorption by the resin was also proved by column regeneration test.