Evaluation of a Compact, Portable Centrifuge for Separating Microvolume Blood Samples at the Point of Collection.

Background: The increased demand for decentralized blood sample collection presents numerous operational challenges for diagnostics providers. Sample degradation including sample hemolysis due to time, temperature, and handling between collection and laboratory analysis leads to limited test menus and unreliable results. Here we introduce the lightweight, portable Labcorp TrueSpin™ for rapid point-of-care blood separation using commercially available microvolume blood collection tubes.

Clinical Evaluation of the Torq Zero Delay Centrifuge System for Decentralized Blood Collection and Stabilization.

Blood sample collection and rapid separation-critical preanalytical steps in clinical chemistry-can be challenging in decentralized collection settings. To address this gap, the Torq™ zero delay centrifuge system includes a lightweight, hand-portable centrifuge (ZDrive™) and a disc-shaped blood collection device (ZDisc™) enabling immediate sample centrifugation at the point of collection. Here, we report results from clinical validation studies comparing performance of the Torq System with a conventional plasma separation tube (PST).

Peroxidase chemically attached on polymeric micelle and its reaction with phenolic compounds.

Horseradish peroxidase was chemically modified with comb-shaped polymaleic anhydride-alt-1-tetradecene (PMA-TD) in microemulsion systems to produce surface-active peroxidase that has capability to form micellar structures in aqueous solutions and can be concentrated at liquid/liquid interfaces without unfolding of the enzyme. For chemical modification oil-in-water (O/W) and water-in-oil (W/O) microemulsion systems composed of n-butyl acetate and a buffer solution were prepared because n-butyl acetate turned out to be less detrimental to the activity of peroxidase at high degree of modification compared to other organic solvents. The modification degree of amine groups on the surface of peroxidase by maleic anhydride groups on PMA-TD was reached at equilibrium after 1h reaction at 0°C, and 42% of amine groups were modified with 7-fold amount of PMA-TD to peroxidase (wt/wt).

Comparison of dynamics in 3D glenohumeral position between primary dislocated shoulders and contralateral healthy shoulders.

Backgrounds: After shoulder dislocation, kinematic changes in shoulder, including translation of the humeral head, ensue. There have been many attempts to measure these changes using motion measurement techniques, but in vivo three-dimensional (3D) glenohumeral changes have not been appreciated until now. The purpose of this study was to measure and analyze changes in glenohumeral translation in patients with shoulder dislocation and compare these changes with healthy shoulder.

Electrical properties of dye-sensitized solar cells prepared by the binder-free TiO2 pastes.

Titania (TiO2) powder, which is material for photoelectrode in dye-sensitized solar cells (DSSCs), was fabricated by hydrothermal synthesis process at 230 degrees C for 12 hours. The crystal structures of all the synthesized nano-structured TiO2 films exhibited anatase phase. Binder-free pastes were prepared with the change of the amount of ammonia water from 2 μl to 640 μl in order to obtain the printable viscosity.

Electrical property of organic thin films for power device.

Monolayers of lipid on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films.

Fabrication of protein chip by magnetic force.

This research describes a new immobilizing method of many kinds of biomaterials (enzyme, antibody, and DNA) on a transducer array using magnetic force interaction as the short-range force. The method composes two immobilizing steps. In the first step, same biomaterials are immobilized on metal particles.

Synthesis of chitosan-based polymeric surfactants and their adsorption properties for heavy metals and fatty acids.

Chitosan-based polymeric surfactants (CBPSs) were prepared by N-acylation of chitosans (chitosan 10 and 500) with several acid anhydrides such as hexanoic (C6), lauric (C12), and palmitic (C16) anhydrides. Among the CBPS samples, CBPSs having a good solubility at pH 4.0 were selected and observed for viscosity, surface tension, and adsorption of heavy metals (Cd2+, Co2+, Cr2O7(2-), and Pb2+) as well as the fatty acid (n-octanoic acid).

Study on the recovery of phosphorus from waste-activated sludge incinerator ash.

Several batch studies that were made up of the acid extraction and the solvent extraction were performed to recover phosphorus from the waste-activated sludge (WAS) incinerator ash. In the acid extraction, the extraction efficiency of phosphorus relied on the acid type, liquid(acid)-to-solid (L(acid)S) ratio, and acid concentration. Phosphorus in the WAS incinerator ash was completely extracted by 1 M HCl at the L(acid)S ratio of 6.

pH- and temperature-sensitive release behaviors from polyelectrolyte complex films composed of chitosan and PAOMA copolymer.

This paper describes the pH and temperature effects on drug release from polyelectrolyte complex (PEC) films composed of a cationic polymer, chitosan, and an anionic polymer, polyalkyleneoxide-maleic acid copolymer (PAOMA). In this study, we prepared and investigated PEC films in terms of the drug release properties as pH- and temperature-sensitive drug carriers. Drug release rates were tested at pH 3.

Evaluation of remediation process with plant-derived biosurfactant for recovery of heavy metals from contaminated soils.

A washing process was studied to evaluate the efficiency of saponin on remediating heavy metal contaminated soils. Three different types of soils (Andosol: soil A, Cambisol: soil B, Regosol: soil C) were washed with saponin in batch experiments. Utilization of saponin was effective for removal of heavy metals from soils, attaining 90-100% of Cd and 85-98% of Zn extractions.