Effect of tube debonding on the enamel surface in vitro : Evaluation with optical coherence tomography.

Objective: In vitro evaluation of the morphology of the enamel surface before bonding metal tubes and after debonding using spectral domain optical coherence tomography (SD-OCT) and light microscopy.

Methods: In all, 40 extracted caries-free human molars without defects were selected and cleaned. The tooth surfaces were imaged by light microscopy and SD-OCT prior to the placement of metal tubes (Titanium Orthos; Ormco, Brea, CA, USA).

Characterization of baseline hemodynamics after the Fontan procedure: a retrospective cohort study on the comparison of 4D Flow MRI and computational fluid dynamics.

The aim of this study was to characterize the hemodynamics of Fontan patients using both four-dimensional flow magnetic resonance imaging (4D Flow MRI) and computational fluid dynamics (CFD). Twenty-nine patients (3.5 ± 0.

OCT Evaluation of Marginal and Internal Interface Integrity of Class V Composite Restorations after 36 to 48 Months.

Purpose: To compare a self-etch and a two-step etch-and-rinse adhesive in terms of internal and marginal composite-tooth bond failure separately on enamel and dentin/cement at 36-48 months after restoration placement using optical coherence tomography (OCT).

Materials And Methods: Twenty-seven patients with two or three class V composite restorations of noncarious cervical lesions 36-48 months after placement were included. The one-step self-etch adhesive Futurabond M ([Voco] group SE, n = 25) and the two-step etch-and-rinse adhesive Solobond M ([Voco] group ER, n = 20) combined with the nanohybrid composite Amaris (Voco) were evaluated.

Metabolomic Profiling of during Different Stages of Fruit Development.

Citrus fruits undergo significant metabolic profile changes during their development process. However, limited information is available on the changes in the metabolites of during fruit development. Here, we analyzed the total phenolic content (TPC), total carotenoid content (TCC), antioxidant activity, and metabolite profiles in fruit flesh during different stages of fruit development and evaluated their correlations.

Clinical and OCT assessment of application modes of a universal adhesive in a 12-month RCT.

Objectives: To evaluate a universal adhesive clinically using FDI criteria and by optical coherence tomography (OCT).

Methods: In 50 patients, three or four non-carious cervical lesions (NCCL) were restored with composite (Venus® Diamond Flow, Kulzer) using iBond® Universal (iBU, Kulzer) applied in self-etch (iBU-SE, n = 50), selective-enamel-etch (iBU-SEE, n = 29) or etch-and-rinse mode (iBU-ER, n = 50) and the reference OptiBond™ FL (OFL, Kerr, n = 50). Restorations were imaged by SD-OCT.

and Assessment of 4D Flow MRI Reynolds Stress Mapping for Pulsatile Blood Flow.

Imaging hemodynamics play an important role in the diagnosis of abnormal blood flow due to vascular and valvular diseases as well as in monitoring the recovery of normal blood flow after surgical or interventional treatment. Recently, characterization of turbulent blood flow using 4D flow magnetic resonance imaging (MRI) has been demonstrated by utilizing the changes in signal magnitude depending on intravoxel spin distribution. The imaging sequence was extended with a six-directional icosahedral (ICOSA6) flow-encoding to characterize all elements of the Reynolds stress tensor (RST) in turbulent blood flow.

Evaluation of quantitative light-induced fluorescence to assess lesion depth in cavitated and non-cavitated root caries lesions - An in vitro study.

Background: This in vitro study aimed to assess carious lesions on root surfaces using quantitative light-induced fluorescence (QLF) and to compare the readings with axial lesion depth on µCT.

Methods: The root surfaces of 107 extracted human teeth were included after visual-tactile inspection. For further analysis, the following parameters were assessed: clinical findings (non-cavitated: leathery or hard, cavitated), QLF- (QLF-D Biluminator 2+), and µCT-images (Bruker Skyscan 1172).

Arrest of root caries with an adjuvant chlorhexidine-fluoride varnish over a 12-months observation period: a QLF-analyzed, placebo-controlled, randomized, clinical trial (RCT).

This study aimed at evaluating the effectiveness of an adjuvant chlorhexidine-fluoride varnish (Cervitec F) for prevention and arrest of root caries on elderly participants using quantitative light-induced fluorescence (QLF). 23 participants with two or three non-cavitated root carious lesions were included and assigned to three groups of different varnishes (CF: Cervitec F, P: placebo, DP: Duraphate). Agents were applied once to root surface at baseline and in follow-up after 3, 6 and 9 months.

Light-based diagnostic methods for the in vivo assessment of initial caries lesions: Laser fluorescence, QLF and OCT.

Objectives: To evaluate different light-based caries diagnostic methods for assessment of non-cavitated initial carious lesions on smooth surfaces.

Methods: 39 participants were included. For each participant, three regions of interest (ROI) with ICDAS codes 0, 1 or 2 were defined.

In vitro experiments on ICOSA6 4D flow MRI measurement for the quantification of velocity and turbulence parameters.

Purpose: To perform comprehensive in vitro experiments using six-directional icosahedral flow encoding (ICOSA6) 4D flow magnetic resonance imaging (MRI) under various scan conditions to analyze the robustness of velocity and turbulence quantification.

Materials And Methods: In vitro flow phantoms with steady flow rates of 10 and 20 L/min were scanned using both conventional 4D flow MRI and ICOSA6. Experiments focused on comparisons between ICOSA6 and conventional four point (4P) methods, and the effects of contrast agents, velocity encoding range (Venc), and scan direction on velocity and turbulence quantification.

Evaluation of low-viscosity bulk-fill composites regarding marginal and internal adaptation.

This study aimed at evaluating the marginal and internal adaptation of low-viscosity bulk-fill composites to enamel and dentin using a self-etch or an etch-and-rinse adhesive without and with artificial ageing. Hundred and twenty-eight MOD cavities in extracted molars were assigned to eight groups (n = 16), restored with the adhesives OptiBond FL (OFL) or Xeno V+ (X) and two low-viscosity bulk-fill composites SDR or x-tra base, covered with Premise. Tetric EvoCeram Bulk Fill and Premise served as a control.

Assessment of non-cavitated root caries lesions by quantitative light-induced fluorescence-An in vivo feasibility study.

Objectives: To evaluate the reproducibility of quantitative light-induced fluorescence (QLF) for the detection and assessment of demineralization states of non-cavitated root surfaces and to determine the correlation between visual inspection and QLF-analysis.

Methods: 46 exposed non-cavitated root surfaces of 12 participants were classified in three scores: sound (0), lesion ≤ 5 mm (1a), lesion > 5 mm in diameter (1b). Three examiners imaged every root surface three times using QLF (QRayCam) and measured fluorescence loss (ΔF) and lesion volume (ΔQ).

Clinical and OCT outcomes of a universal adhesive in a randomized clinical trial after 12 months.

Objectives: To assess the performance of a universal adhesive in different application modes in non-carious cervical lesions clinically and by optical coherence tomography (OCT).

Methods: 55 adult patients with three non-carious cervical lesions (NCCL) each participated in the study. Lesions were restored with Scotchbond™ Universal (SBU, 3 M) applied in the self-etch (SBU-SE) and the selective-enamel-etch mode (SBU-SEE) in combination with Filtek™ Supreme XTE (3 M).

Effectiveness of caries-preventing agents on initial carious lesions within the scope of orthodontic therapy.

Objective: To evaluate the effectiveness of three different caries-preventing agents on artificial caries in a -based caries model.

Methods: Sixty-five caries-free human molar enamel blocks were treated with a demineralization solution and a remineralization solution. The specimens were assigned to the following groups according to the caries-protective product applied: group A, chlorhexidine varnish; group B, fluoride-releasing chemically cured sealant; group C, fluoride-releasing lightcured sealant; group D, positive control (specimens that were subjected to de- and remineralization cycles without treatment with any caries-protective agents); and group E, negative control (specimens that were not subjected to de- and remineralization cycles).

Magnetic Plasmon Networks Programmed by Molecular Self-Assembly.

Nanoscale manipulation of magnetic fields has been a long-term pursuit in plasmonics and metamaterials, as it can enable a range of appealing optical properties, such as high-sensitivity circular dichroism, directional scattering, and low-refractive-index materials. Inspired by the natural magnetism of aromatic molecules, the cyclic ring cluster of plasmonic nanoparticles (NPs) has been suggested as a promising architecture with induced unnatural magnetism, especially at visible frequencies. However, it remains challenging to assemble plasmonic NPs into complex networks exhibiting strong visible magnetism.

Correction to: Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

In the original publication of the article the paragraph "The four resin-based composites…" appearing below the "Materials and methods" section is incomplete. The correct paragraph is provided in this correction below.

Evaluation of calculus imaging on root surfaces by spectral-domain optical coherence tomography.

Objective: The aim of this in vitro study was to evaluate the ability of optical coherence tomography (OCT) to display calculus on root surfaces.

Material And Methods: Ten teeth with calculus on the root surface were embedded in resin, omitting the root surface. A region of interest (ROI) was marked by small drill holes coronally and apically of the calculus and imaged by spectral-domain optical coherence tomography ([SD OCT], Telesto SP5, centre wavelength 1310 nm) and light microscopy (LM).

Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies.

The aim of this study was to evaluate internal and marginal adaptation of high-viscosity bulk-fill composites to enamel and dentin with a self-etch (SE) and an etch-and-rinse adhesive (ER) without and with artificial aging. 128 MOD cavities in extracted human molars were prepared, randomly assigned to 8 groups (n = 16), bonded with either OptiBond FL (OFL, ER) or Xeno V+ (X, SE), and restored in 4 mm horizontal bulk layers with SonicFill (SF), Tetric EvoCeram Bulk fill (TEC), and x-tra fil (XF). Incremental layering technique with Premise (P) served as control.

Visualization of the pulp chamber roof and residual dentin thickness by spectral-domain optical coherence tomography in vitro.

The aim of this study was to evaluate the ability of spectral-domain optical coherence tomography (SD-OCT) to display the roof of the pulp chamber and to estimate the residual dentin thickness (RDT) of the pulp complex. The roots of 20 extracted human molars were embedded in epoxy resin, and crowns were longitudinally sectioned in the mesial-distal direction, exposing the pulp chamber. The coronal part of the crown was removed up to an RDT to the pulp chamber roof of 2 mm.

A Plesiohedral Cellular Network of Graphene Bubbles for Ultralight, Strong, and Superelastic Materials.

Advanced materials with low density and high strength impose transformative impacts in the construction, aerospace, and automobile industries. These materials can be realized by assembling well-designed modular building units (BUs) into interconnected structures. This study uses a hierarchical design strategy to demonstrate a new class of carbon-based, ultralight, strong, and even superelastic closed-cellular network structures.

OCT for early quality evaluation of tooth-composite bond in clinical trials.

Objectives: To evaluate early quality of composite restorations with a universal adhesive in different application modes clinically and with optical coherence tomography (OCT).

Methods: 22 patients with four non-carious cervical lesions each received composite restorations (Filtek Supreme XTE, 3 M). The universal adhesive Scotchbond Universal(SBU, 3 M) was applied with three etching protocols: self-etch (SE), selective-enamel-etch (SEE) and etch-and-rinse (ER).

Optical coherence tomography to evaluate variance in the extent of carious lesions in depth.

Evaluation of variance in the extent of carious lesions in depth at smooth surfaces within the same ICDAS code group using optical coherence tomography (OCT) in vitro and in vivo. (1) Verification/validation of OCT to assess non-cavitated caries: 13 human molars with ICDAS code 2 at smooth surfaces were imaged using OCT and light microscopy. Regions of interest (ROI) were categorized according to the depth of carious lesions.

Structural insights into the oligomerization of FtsH periplasmic domain from Thermotoga maritima.

Prompt removal of misfolded membrane proteins and misassembled membrane protein complexes is essential for membrane homeostasis. However, the elimination of these toxic proteins from the hydrophobic membrane environment has high energetic barriers. The transmembrane protein, FtsH, is the only known ATP-dependent protease responsible for this task.