Laser-Ablated Red Phosphorus on Carbon Nanotube Film for Accelerating Polysulfide Conversion toward High-Performance and Flexible Lithium-Sulfur Batteries.

The use of a conducting interlayer between separator and cathode is one of the most promising methods to trap lithium polysulfides (LiPSs) for enhancing the performance of lithium-sulfur (Li-S) batteries. Red phosphorus nanoparticles (RP )-coated carbon nanotube (CNT) film (RP @CF) is reported herein as a novel interlayer for Li-S batteries, which shows strong chemisorption of LiPSs, good flexibility, and excellent electric conductivity. A pulsed laser ablation method is engaged for the ultrafast production of RP of uniform morphology, which are deposited on the CNT film by a direct spinning method.

Indium-contacted van der Waals gap tunneling spectroscopy for van der Waals layered materials.

The electrical phase transition in van der Waals (vdW) layered materials such as transition-metal dichalcogenides and BiSrCaCuO (Bi-2212) high-temperature superconductor has been explored using various techniques, including scanning tunneling and photoemission spectroscopies, and measurements of electrical resistance as a function of temperature. In this study, we develop one useful method to elucidate the electrical phases in vdW layered materials: indium (In)-contacted vdW tunneling spectroscopy for 1T-TaS, Bi-2212 and 2H-MoS. We utilized the vdW gap formed at an In/vdW material interface as a tunnel barrier for tunneling spectroscopy.

Screening of Electrolyte Complexes Formed Between Dextran Sulfate and Amine Structures of Small-Molecule Drugs.

Formation of an electrolyte complex using the electrostatic interactions between a polyanionic polymer and a cationic drug is a simple and efficient method of preparing a colloidal drug carrier system. Dextran sulfate, with a negatively charged sulfate group, was reacted in an acetate buffer solution of pH 3 with positively charged 1° amine, 2° amine, 3° amine, piperazine, and piperidine structures from 24 small-molecule drugs. The electrolyte complex was formed from 15 drugs, 63% of those tested.

Adsorption of Acetonitrile on Si(111)-(7 × 7).

The adsorption of acetonitrile (CHCN) on Si(111)-(7 × 7) at a room temperature has been investigated using scanning tunneling microscopy (STM) and first-principles calculations. The site-specific information on adsorption enables us to understand the site-by-site and step-by-step adsorption mechanism. From theoretical simulations, the most stable configuration of CHCN on Si(111)-(7 × 7) is found to be a molecularly chemisorbed CHCN with the carbon and nitrogen atoms of CN bonded to the rest atom and adatom on the Si surface, respectively.

Investigation of atomic and electronic properties of 2D-MoS/3D-GaN mixed-dimensional heterostructures.

We have performed density functional theory calculations to study the effects caused by the interfacial structure between 2D-MoS and 3D-GaN. Two different surface terminations of GaN are considered: Ga-terminated (0001) (Ga-GaN) and N-terminated ([Formula: see text]) (N-GaN) configurations. We confirm that Rashba spin splitting occurs in band structure of MoS on GaN.

Remote homoepitaxy of ZnO microrods across graphene layers.

Two-dimensional atomic layered materials (2d-ALMs) are emerging candidates for use as epitaxial seed substrates for transferrable epilayers. However, the micrometer-sized domains of 2d-ALMs preclude their practical use in epitaxy because they cause crystallographically in-plane disordering of the overlayer. Ultrathin graphene can penetrate the electric dipole momentum from an underlying crystal layer to the graphene surface, which then drives it to crystallize the overlayer during the initial growth stage, thus resulting in substantial energy saving.

Mixed-dimensional 2D/3D heterojunctions between MoS and Si(100).

For utilization of two-dimensional (2D) materials as electronic devices, their mixed-dimensional heterostructures with three-dimensional (3D) materials are receiving much attention. In this study, we have investigated the atomic and electronic structures of the 2D/3D heterojunction between MoS2 and Si(100) using density functional theory calculations; especially, we focus on the contact behavior dependence on the interfacial structures of heterojunctions by considering two types of surface termination of Si(100) surfaces. Calculations show that MoS2 and clean Si(100) form an almost n-type ohmic contact with a very small Schottky barrier height (SBH) due to strong covalent bonds between them, and that the contact between MoS2 and H-covered Si(100) makes a p-n heterojunction with weak van der Waals interactions.

Visualizing Degradation of Black Phosphorus Using Liquid Crystals.

Black Phosphorus (BP) is an excellent material from the post graphene era due to its layer dependent band gap, high mobility and high I/I. However, its poor stability in ambient poses a great challenge for its practical and long-term usage. The optical visualization of the oxidized BP is the key and the foremost step for its successful passivation from the ambience.

Temperature-Dependent and Gate-Tunable Rectification in a Black Phosphorus/WS van der Waals Heterojunction Diode.

Heterostructures comprising two-dimensional (2D) semiconductors fabricated by individual stacking exhibit interesting characteristics owing to their 2D nature and atomically sharp interface. As an emerging 2D material, black phosphorus (BP) nanosheets have drawn much attention because of their small band gap semiconductor characteristics along with high mobility. Stacking structures composed of p-type BP and n-type transition metal dichalcogenides can produce an atomically sharp interface with van der Waals interaction which leads to p-n diode functionality.

Controlled Electrochemical Intercalation of Graphene/h-BN van der Waals Heterostructures.

Electrochemical intercalation is a powerful method for tuning the electronic properties of layered solids. In this work, we report an electrochemical strategy to controllably intercalate lithium ions into a series of van der Waals (vdW) heterostructures built by sandwiching graphene between hexagonal boron nitride (h-BN). We demonstrate that encapsulating graphene with h-BN eliminates parasitic surface side reactions while simultaneously creating a new heterointerface that permits intercalation between the atomically thin layers.

Van der Waals heterojunction diode composed of WS flake placed on p-type Si substrate.

P-N junctions represent the fundamental building blocks of most semiconductors for optoelectronic functions. This work demonstrates a technique for forming a WS/Si van der Waals junction based on mechanical exfoliation. Multilayered WS nanoflakes were exfoliated on the surface of bulk p-type Si substrates using a polydimethylsiloxane stamp.

In situ hybridization of carbon nanotubes with bacterial cellulose for three-dimensional hybrid bioscaffolds.

Carbon nanotubes (CNTs) have shown great potential in biomedical fields. However, in vivo applications of CNTs for regenerative medicine have been hampered by difficulties associated with the fabrication of three-dimensional (3D) scaffolds of CNTs due to CNTs' nano-scale nature. In this study, we devised a new method for biosynthesis of CNT-based 3D scaffold by in situ hybridizing CNTs with bacterial cellulose (BC), which has a structure ideal for tissue-engineering scaffolds.

Rhizosphere microbial activity during phytoremediation of diesel-contaminated soil.

To know microbial activity and diesel-removal efficiency influencing through plant roots, we examined the effect of the rhizosphere on phytoremediation of diesel-contaminated soils by alfalfa (Medicago sativa L.). Pots were treated with and without diesel and allowed to stabilize for 7 weeks, at which time four experimental/control groups were prepared: (1) planted diesel-contaminated soil, (2) unplanted diesel-contaminated soil, (3) planted uncontaminated soil, and (4) unplanted uncontaminated soil.