Patterned transparent electrode with a continuous distribution of silver nanowires produced by an etching-free patterning method.

The outstanding electrical, optical, and mechanical properties of silver nanowire transparent electrodes are attractive for use in many optoelectronic devices, and the recent developments related to these electrodes have led to their commercialization. To more fully utilize the advantages of this technology, developing new process technologies in addition to performance improvements is important. In this report, we propose a novel ultra-simple patterning technology to generate a silver nanowire transparent layer and a unique patterned structure with continuously distributed silver nanowires without any etched areas.

Electrically conductive epoxy nanocomposites with expanded graphite/carbon nanotube hybrid fillers prepared by direct hybridization.

Carbon nanotubes (CNTs) are generally used to promote the electrical conductivity of the polymer nanocomposites. However, in spite of their superior properties, CNT's high cost has limited their commercial application, so far. Thus, the development of hybrid carbon nanomaterials (CNMs) composed of CNTs and cheaper CNMs such as carbon fibers (CFs), expanded graphites (EGs), and graphene nanoplatelets (GNPs) is important in terms of reducing the cost of CNT-based fillers.

Liquid-phase exfoliation of expanded graphites into graphene nanoplatelets using amphiphilic organic molecules.

Graphenes with a two-dimensional lattice of carbons have been widely employed in diverse applications owing to their excellent electrical, thermal, mechanical, and gas-barrier properties. However, the frequently-used reduced graphene oxide (rGO), which is synthesized from natural graphites by strong oxidation and subsequent reduction via highly toxic components, exhibits imperfect characteristics because of remaining defect sites on its basal planes. Therefore, in this work, we present a convenient way to prepare graphene nanoplatelets (GNPs) with minimized defect sites on their basal planes employing liquid-phase exfoliation of edge-functionalized expanded graphites (EGs) with amphiphilic organic molecules.

Carbon hybrid fillers composed of carbon nanotubes directly grown on graphene nanoplatelets for effective thermal conductivity in epoxy composites.

Carbon nanomaterials are generally used to promote the thermal conductivity of polymer composites. However, individual graphene nanoplatelets (GNPs) or carbon nanotubes (CNTs) limit the realization of the desirable thermal conductivity of the composite in both through- and in-plane directions. In this work, we present the thermal conductivity enhancement of the epoxy composite with carbon hybrid fillers composed of CNTs directly grown on the GNP support.

Efficiency enhancement in a-plane InGaN/GaN light emitters with carbon nanotubes.

This study investigates the coupling modes of a-plane InGaN/GaN mutiquantum wells (MQWs) with single-walled carbon nanotubes (SWCNTs). The enhancement of light emissions at resonance photon energies can be explained by the surface plasmon coupling of the MQW-SWCNT hybrid structure. The photoluminescence (PL) enhancement ratios of the indigo (2.

Improvement of SWCNT transparent conductive films via transition metal doping.

To realize transparent conductive films based on single-walled carbon nanotubes (SWCNTs), we applied a spray coating process with transition metal doping to SWCNT networks. Schottky contacts between metallic and semiconducting SWCNTs changed to Ohmic contacts due to the reduction of metals on the SWCNT surfaces via direct conversion from solution.

Enhanced electrical percolation due to interconnection of three-dimensional pentacene islands in thin films on low surface energy polyimide gate dielectrics.

The role of lateral interconnections between three-dimensional pentacene islands on low surface energy polyimide gate dielectrics was investigated by the measurement of the surface coverage dependence of the charge mobility and the use of conducting-probe atomic force microscopy (CP-AFM). From the correlation between the electrical characteristics and the morphological evolution of the three-dimensionally grown pentacene films-based field-effect transistors, we found that during film growth, the formation of interconnections between the three-dimensional pentacene islands that are isolated at the early stage contributes significantly to the enhancement process of charge mobility. The CP-AFM current mapping images of the pentacene films also indicate that the lateral interconnections play an important role in the formation of good electrical percolation pathways between the three-dimensional pentacene islands.