13.2% efficiency Si nanowire/PEDOT:PSS hybrid solar cell using a transfer-imprinted Au mesh electrode.

Unlabelled: In recent years, inorganic/organic hybrid solar cell concept has received growing attention for alternative energy solution because of the potential for facile and low-cost fabrication and high efficiency. Here, we report highly efficient hybrid solar cells based on silicon nanowires (SiNWs) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (

Pedot: PSS) using transfer-imprinted metal mesh front electrodes. Such a structure increases the optical absorption and shortens the carrier transport distance, thus, it greatly increases the charge carrier collection efficiency.

Mie resonance-mediated antireflection effects of Si nanocone arrays fabricated on 8-in. wafers using a nanoimprint technique.

Unlabelled: We fabricated 8-in. Si nanocone (NC) arrays using a nanoimprint technique and investigated their optical characteristics. The NC arrays exhibited remarkable antireflection effects; the optical reflectance was less than 10% in the visible wavelength range.

Lossless hybridization between photovoltaic and thermoelectric devices.

The optimal hybridization of photovoltaic (PV) and thermoelectric (TE) devices has long been considered ideal for the efficient harnessing solar energy. Our hybrid approach uses full spectrum solar energy via lossless coupling between PV and TE devices while collecting waste energy from thermalization and transmission losses from PV devices. Achieving lossless coupling makes the power output from the hybrid device equal to the sum of the maximum power outputs produced separately from individual PV and TE devices.

The tradeoff between plasmonic enhancement and optical loss in silicon nanowire solar cells integrated in a metal back reflector.

We perform a systematic numerical study to characterize the tradeoff between the plasmonic enhancement and optical loss in periodically aligned, silicon nanowire (SiNW) arrays integrated with a silver back reflector (Ag BR). Optimizing the embedded depth of the wire bottoms into a silver reflector achieved a highly efficient SiNW solar cell. Compared to the SiNW solar cell employing a flat back reflector, the embedded depth of ~20 nm resulted in the relative increase of ~5% in ultimate solar cell efficiency.

Epitaxial insertion of gold silicide nanodisks during the growth of silicon nanowires.

Nanodisk-shaped, single-crystal gold silicide heterojunctions were inserted into silicon nanowires during vapor-liquid-solid growth using Au as a catalyst within a specific range of chlorine-to-hydrogen atomic ratio. The mechanism of nanodisk formation has been investigated by changing the source gas ratio of SiCl4 to H2. We report that an over-supply of silicon into the Au-Si liquid alloy leads to highly supersaturated solution and enhances the precipitation of Au in the silicon nanowires due to the formation of unstable phases within the liquid alloy.

Effective method to extract optical bandgaps in Si nanowire arrays.

A simple method to extract the optical bandgap of Si nanowire (SiNW) arrays that utilizes the reflection spectra of freestanding SiNW arrays is presented in this Letter. At a fixed nanowire diameter, three different wire lengths reproducibly formed a cross point in their reflectance curve plots. The cross point wavelength corresponded to the optical bandgap, as verified by the classical Tauc's model.

A strong antireflective solar cell prepared by tapering silicon nanowires.

Vertically aligned silicon nanowires (SiNWs) were cost-effectively formed on a four-inch silicon wafer using a simple room temperature approach, i.e., metal-assisted electroless etching.

A waferscale Si wire solar cell using radial and bulk p-n junctions.

Silicon nanowires (NWs) and microwires (MWs) are cost-effectively integrated on a 4-inch wafer using metal-assisted electroless etching for solar cell applications. MWs are periodically positioned using low-level optical patterning in between a dense array of NWs. A spin-on-doping technique is found to be effective for the formation of heavily doped, thin n-type shells of MWs in which the radial doping profile is easily delineated by low voltage scanning electron microscopy.

Synthesis of Al-catalyzed Si nanowires using the Al remaining after removal of anodic aluminum oxide.

Single-crystal, Al-catalyzed silicon nanowires were grown under atmospheric pressure using the dimpled feature of the Al metal that remained after removal of an anodic aluminum oxide (AAO) template directly formed on a Si substrate. Upon annealing in a hydrogen-rich atmosphere, the dimpled morphology of Al was transformed into a smooth, rounded shape in which Si nanodots were periodically embedded due to Si migration from the substrate. The positions of the nanodots were exactly the same as the positions of sawtooth features on the dimpled surface.