Stretchable and Skin-Conformal Thermoelectric Generator with Highly Flexible and Plastically Bendable Silver Selenide Films.

Among inorganic thermoelectric materials, flexible thermoelectric materials have attracted considerable attention. In this study, highly flexible and plastically bendable silver selenide films with excellent thermoelectric performance at room temperature are presented. The flexibility of the freestanding silver selenide films was significantly improved through a simple annealing treatment.

Substrate-Free Thermoelectric 25 μm-Thick AgSe Films with High Flexibility and In-Plane of 0.5 at Room Temperature.

Thermoelectric inorganic films are flexible when sufficiently thin. By removing the substrate, that is, making them free-standing, the flexibility of thermoelectric films can be enhanced to the utmost extent. However, studies on the flexibility of free-standing thermoelectric inorganic films have not yet been reported.

Zero Energy Heating of Solvent with Network-Structured Solar-Thermal Material: Eco-Friendly Palladium Catalysis of the Suzuki Reaction.

Solar-thermal materials absorb sunlight and convert it into heat, which is released into the surrounding medium. Utilization of solar energy for solvent heating can be a potential method of eco-friendly organic reactions. However, to date, significant heating of the entire volume of a solvent by 1 sun illumination has not been reported.

One-pot bifunctionalization of silica nanoparticles conjugated with bioorthogonal linkers: application in dual-modal imaging.

Covalent surface modification of silica nanoparticles (SNPs) offers great potential for the development of multimodal nanomaterials for biomedical applications. Herein, we report the synthesis of covalently conjugated bifunctional SNPs and their application to multimodal imaging. Bis(methallyl)silane 15 with cyclopropene and maleimide, designed as a stable bifunctional linker, was efficiently synthesized by traceless Staudiger ligation, and subsequently introduced onto the surface of monodispersed SNPs Sc(OTf)-catalyzed siloxane formation.

Skin protein-derived peptide-conjugated vesicular nanocargos for selected skin cell targeting and consequent activation.

Several studies have reported that a drug nanocarrier conjugated with ligands having cell binding ability improves drug delivery performance, but multiple cell-targeting and the resultant activation in designated cells has not been investigated yet. This study reports a skin cell multi-targeting vesicular nanocargo system. We selectively conjugated several skin protein-derived cell-targeting peptides (CTPs), including KTTKS, NAP-amide, and Lam332, to amphiphilic polymer-reinforced lipid nanovesicles (PLNVs) to specifically target fibroblasts, melanocytes, and keratinocytes, respectively, through effective association with the corresponding cell membrane receptors.

Optimized Thermoelectric Performance of Carbon Nanoparticle-Carbon Nanotube Heterostructures by Tuning Interface Barrier Energy.

Herein, thermoelectric carbon nanoparticle (CNP)-carbon nanotube (CNT) heterostructures are introduced as a promising flexible thermoelectric material. The optimal barrier energy between the CNP and CNT increases the Seebeck coefficient () of the heterostructures through the energy filtering effect. For optimized thermoelectric performance, the CNP-CNT barrier energy can be effectively tuned by controlling the work function of the CNPs.

High-Performance n-Type Carbon Nanotubes Doped by Oxidation of Neighboring SbTe for a Flexible Thermoelectric Generator.

Flexible thermoelectric devices can be potentially used for flexible cooling and energy harvesting from various heat sources such as the human body. However, the development of flexible thermoelectric materials with excellent thermoelectric performance is still very challenging. In this study, a simple solution process is proposed for the preparation of flexible inorganic/carbon nanotube hybrid films with record power factors among those of the reported flexible n-type thermoelectric materials.

Shape-Deformable Thermoelectric Carbon Nanotube Doughs.

In this study, shape-deformable thermoelectric p- and n-type doughs are fabricated by blending single-walled carbon nanotubes with excess amounts of nonvolatile liquid surfactants for efficient energy harvesting from diverse heat sources. The shape-deformable thermoelectric doughs exhibit touch-healing properties and can be easily molded into arbitrary shapes by simple shaping methods, such as those commonly used for rubber play dough. We used cube-shaped thermoelectric doughs to fabricate a vertical thermoelectric generator.

Solution-Processed Carbon Nanotube Buckypapers for Foldable Thermoelectric Generators.

Freestanding single-walled carbon nanotube (SWCNT) buckypapers with thicknesses of ∼30 μm are fabricated using a simple bar-coating process. The Seebeck coefficient and electrical conductivity of the SWCNT buckypapers are affected by the composition of the dispersion solvent mixture. The maximum p-type power factor of a SWCNT buckypaper is 411 ± 13 μW m K.

Thermoelectric fibers from well-dispersed carbon nanotube/poly(vinyliedene fluoride) pastes for fiber-based thermoelectric generators.

High-performance thermoelectric composite fibers were prepared via simple wet-spinning of single-walled carbon nanotube (SWCNT)/poly(vinylidene fluoride) (PVDF) pastes using a common solvent/coagulation system. By improving the content and dispersion state of SWCNTs in the composite fibers, the thermoelectric performance could be effectively enhanced. With n-type doping of SWCNTs using polyethylenimine, high-performance n-type SWCNT/PVDF composite fibers could be prepared.

Solution-Processable, Thin, and High-κ Dielectric Polyurea Gate Insulator with Strong Hydrogen Bonding for Low-Voltage Organic Thin-Film Transistors.

We developed a solution-processable, thin, and high-dielectric polyurea-based organic gate insulator for low-voltage operation and high performance of organic thin-film transistors (OTFTs). A 60 nm-thick polyurea thin film exhibited a high dielectric constant of 5.82 and excellent electrical insulating properties owing to strong hydrogen bonding.

Metal-oxide assisted surface treatment of polyimide gate insulators for high-performance organic thin-film transistors.

We developed a facile method for treating polyimide-based organic gate insulator (OGI) surfaces with self-assembled monolayers (SAMs) by introducing metal-oxide interlayers, called the metal-oxide assisted SAM treatment (MAST). To create sites for surface modification with SAM materials on polyimide-based OGI (KPI) surfaces, the metal-oxide interlayer, here amorphous alumina (α-AlO), was deposited on the KPI gate insulator using spin-coating via a rapid sol-gel reaction, providing an excellent template for the formation of a high-quality SAM with phosphonic acid anchor groups. The SAM of octadecylphosphonic acid (ODPA) was successfully treated by spin-coating onto the α-AlO-deposited KPI film.

High Thermoelectric Power Factor of a Diketopyrrolopyrrole-Based Low Bandgap Polymer via Finely Tuned Doping Engineering.

We studied the thermoelectric properties of a diketopyrrolopyrrole-based semiconductor (PDPP3T) via a precisely tuned doping process using Iron (III) chloride. In particular, the doping states of PDPP3T film were linearly controlled depending on the dopant concentration. The outstanding Seebeck coefficient of PDPP3T assisted the excellent power factors (PFs) over 200 μW mK at the broad range of doping concentration (3-8 mM) and the maximum PF reached up to 276 μW mK, which is much higher than that of poly(3-hexylthiophene), 56 μW mK.

3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers.

The use of 3-dimensional (3D) printable conductive materials has gained significant attention for various applications because of their ability to form unconventional geometrical architectures that cannot be realized with traditional 2-dimensional printing techniques. To resolve the major requisites in printed electrodes for practical applications (including high conductivity, 3D printability, excellent adhesion, and low-temperature processability), we have designed a chemically-reinforced multi-dimensional filler system comprising amine-functionalized carbon nanotubes, carboxyl-terminated silver nanoparticles, and Ag flakes, with the incorporation of a thermoplastic polystyrene-polyisoprene-polystyrene (SIS) triblock copolymer. It is demonstrated that both high conductivity, 22 939 S cm, and low-temperature processability, below 80 °C, are achievable with the introduction of chemically anchored carbon-to-metal hybrids and suggested that the highly viscous composite fluids employing the characteristic thermoplastic polymer are readily available for the fabrication of various unconventional electrode structures by a simple dispensing technique.

Foldable Thermoelectric Materials: Improvement of the Thermoelectric Performance of Directly Spun CNT Webs by Individual Control of Electrical and Thermal Conductivity.

We suggest the fabrication of foldable thermoelectric (TE) materials by embedding conducting polymers into Au-doped CNT webs. The CNT bundles, which are interconnected by a direct spinning method to form 3D networks without interfacial contact resistance, provide both high electrical conductivity and high carrier mobility. The ZT value of the spun CNT web is significantly enhanced through two simple processes.

Surface grafting of octylamine onto poly(ethylene-alt-maleic anhydride) gate insulators for low-voltage DNTT thin-film transistors.

This study investigates a spin-coating method for modifying the surface properties of a poly(ethylene-alt-maleic anhydride) (PEMA) gate insulator. The 60 nm-thick PEMA thin film exhibits excellent electrical insulating properties, and its surface properties could be easily modified by surface grafting of octylamine. Due to surface treatment via spin-coating, the surface energy of the PEMA gate insulator decreased, the crystal quality of the organic semiconductor improved, and consequently the performance of low-voltage organic thin-film transistors (TFTs) was enhanced.

Facile Preparation of Highly Conductive Metal Oxides by Self-Combustion for Solution-Processed Thermoelectric Generators.

Highly conductive indium zinc oxide (IZO) thin films were successfully fabricated via a self-combustion reaction for application in solution-processed thermoelectric devices. Self-combustion efficiently facilitates the conversion of soluble precursors into metal oxides by lowering the required annealing temperature of oxide films, which leads to considerable enhancement of the electrical conductivity of IZO thin films. Such enhanced electrical conductivity induced by exothermic heat from a combustion reaction consequently yields high performance IZO thermoelectric films.

Solution synthesis of telluride-based nano-barbell structures coated with PEDOT:PSS for spray-printed thermoelectric generators.

Unlabelled: Solution-processable telluride-based heterostructures coated with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (Te-Bi2Te3/PEDOT:PSS) were synthesized through a solution-phase reaction at low temperatures. The water-based synthesis yielded

Pedot: PSS-coated Te-Bi2Te3 nano-barbell structures with a high Seebeck coefficient that can be stably dispersed in water. These hybrid solutions were deposited onto a substrate by the spray-printing method to prepare thermoelectric generators.

Enhancement of Thermoelectric Properties of PEDOT:PSS and Tellurium-PEDOT:PSS Hybrid Composites by Simple Chemical Treatment.

Unlabelled: The thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (

Pedot: PSS) and tellurium-

Pedot: PSS (Te-

Pedot: PSS) hybrid composites were enhanced via simple chemical treatment. The performance of thermoelectric materials is determined by their electrical conductivity, thermal conductivity, and Seebeck coefficient. Significant enhancement of the electrical conductivity of

Pedot: PSS and Te-

Pedot: PSS hybrid composites from 787.

Enhanced thermoelectric performance of bar-coated SWCNT/P3HT thin films.

The influence of processing conditions, such as ink concentration and coating method, on the thermoelectric properties of SWCNT/P3HT nanocomposite films was investigated systematically. Using simple wire-bar-coating, SWCNT/P3HT nanocomposite films with high thermoelectric performance could be obtained without additional P3HT doping. The wire-bar-coated SWCNT/P3HT nanocomposite films exhibited power factors of up to 105 μW m(-1) K(-2) at room temperature.

Silylated mesoporous silica membranes on polymeric hollow fiber supports: synthesis and permeation properties.

We report the synthesis and organic/water separation properties of mesoporous silica membranes, supported on low-cost and scalable polymeric (polyamide-imide) hollow fibers, and modified by trimethylsilylation with hexamethyldisilazane. Thin (∼1 μm) defect-free membranes are prepared, with high room-temperature gas permeances (e.g.

Solvent-free directed patterning of a highly ordered liquid crystalline organic semiconductor via template-assisted self-assembly for organic transistors.

Highly ordered organic semiconductor micropatterns of the liquid-crystalline small molecule 2,7-didecylbenzothienobenzothiophene (C10 -BTBT) are fabricated using a simple method based on template-assisted self-assembly (TASA). The liquid crystallinity of C10 -BTBT allows solvent-free fabrication of high-performance printed organic field-effect transistors (OFETs).

Surface modification of a polyimide gate insulator with an yttrium oxide interlayer for aqueous-solution-processed ZnO thin-film transistors.

We report a simple approach to modify the surface of a polyimide gate insulator with an yttrium oxide interlayer for aqueous-solution-processed ZnO thin-film transistors. It is expected that the yttrium oxide interlayer will provide a surface that is more chemically compatible with the ZnO semiconductor than is bare polyimde. The field-effect mobility and the on/off current ratio of the ZnO TFT with the YOx/polyimide gate insulator were 0.

Enhanced performance of solution-processed organic thin-film transistors with a low-temperature-annealed alumina interlayer between the polyimide gate insulator and the semiconductor.

We studied a low-temperature-annealed sol-gel-derived alumina interlayer between the organic semiconductor and the organic gate insulator for high-performance organic thin-film transistors. The alumina interlayer was deposited on the polyimide gate insulator by a simple spin-coating and 200 °C-annealing process. The leakage current density decreased by the interlayer deposition: at 1 MV/cm, the leakage current densities of the polyimide and the alumina/polyimide gate insulators were 7.

Surface modification of polyimide gate insulators for solution-processed 2,7-didecyl[1]benzothieno[3,2-b][1]benzothiophene (C10-BTBT) thin-film transistors.

The surface property of a polyimide gate insulator was successfully modified with an n-octadecyl side-chain. Alkyl chain-grafted poly(amic acid), the polyimide precursor, was synthesized using the diamine comonomer with an alkyl side-chain. By adding a base catalyst to the poly(amic acid) coating solution, the imidization temperature of the spin-coated film could be reduced to 200 °C.