Status and future trends of hollow fiber biogas separation membrane fabrication and modification techniques.

With the increasing global demand for energy, renewable and sustainable biogas has attracted considerable attention. However, the presence of various gases such as methane, carbon dioxide (CO), nitrogen, and hydrogen sulfide in biogas, and the potential emission of acid gases, which may adversely influence the environment, limits the efficient application of biogas in many fields. Consequently, researchers have focused on the upgrade and purification of biogas to eliminate impurities and obtain high-quality and high-purity biomethane with an increased combustion efficiency.

Reverse osmosis membrane fabrication and modification technologies and future trends: A review.

Reverse osmosis (RO) is the most widely used technology in water treatment and desalination technologies for potable water production. Since its invention, RO has undergone significant developments in terms of material science, process, system optimization, methods of membrane synthesis, and modifications. Among various materials used for the synthesis of an RO membrane, the polyamide thin-film composite (PA-TFC) is by far the most common, owing to its excellent water permeability high salt rejection, and stability.

Removal of fluoride in membrane-based water and wastewater treatment technologies: Performance review.

The presence of excess fluoride in aqueous media above local environmental standards (e.g., the U.

Membrane-based technologies for zero liquid discharge and fluoride removal from industrial wastewater.

Several defluoridation techniques for reducing high initial fluoride concentration (IFC) in wastewater have been tested, but only a few of them have achieved the permissible standards. This study examined the hybrid crystallization-reverse osmosis technique (HRO) in light of flux, fluoride removal efficiency, fouling tendency, mineral recovery, complying zero liquid discharge (ZLD), and effluent discharge standard (EDS). Simulated wastewater with an IFC of 6600 mg/L was utilized and the final HRO performance was compared with those of the low-pressure (30 bar) standalone reverse osmosis (SRO), nanofiltration (SNF), and membrane distillation (SMD) processes.

Analysis of mass transfer behavior in membrane distillation: Mathematical modeling under various conditions.

Four commercially available hydrophobic membranes with different pore sizes were separately used in a direct contact membrane distillation (DCMD) apparatus to investigate the effect of fouling on the mass transfer coefficient, and the dominant mass transport mode under different conditions defined by the temperature, membrane material, flow regime, and membrane pore size. Both ultrapure deionized water and simulated industrial wastewater were considered as the feed water. The results of the investigation confirmed that the fouling layer impacted the mass transport directly by resisting it, and indirectly by altering the heat transfer mechanism.