Beam quality measurement of high power laser by using an involute pinhole array.

A novel method for power-in-the-bucket (PIB) measurement of high power laser beams is proposed. The laser beam spot was first sampled by a rotating involute pinhole array and then collected by using a photodetector placed behind the pinholes. The spatial-temporal distribution and calibrated PIB curve of the laser beam can be obtained.

Linearly excited indium fluorescence imaging for temporally resolved high-precision flame thermometry.

Two-line atomic fluorescence (TLAF) is a promising technique for two-dimensional (2D) flame thermometry. However, it suffers either from a low signal-to-noise ratio (SNR) when excited in the linear regime or a quenching effect and nonlinear behavior in the nonlinear regime. This work aims to develop a new TLAF modality, which can overcome the aforementioned limitations based on a specifically designed laser source that can generate long pulses (∼400) with a moderate energy of ∼0.

Thermal modeling of high-power Yb-doped fiber lasers with irradiated active fibers.

With both radiation effects and thermal effects taken into consideration, a multiphysics thermal model concerning high-power Yb-doped fiber lasers operated with post-irradiated active fibers is established. Radiation-related parameters, including propagation losses, refractive indexes and lifetime, are considered. And, with the temperature profile of the active fiber, temperature-dependent parameters, including absorption and emission cross-sections, refractive indexes and lifetime, are updated every loop to simulate the output parameters.

High energy closed-loop cycle narrow linewidth optically pumped XeF(C-A) blue laser at a repetition rate of 10 Hz.

We report for the first time on a closed-loop cycle narrow linewidth XeF(C-A) blue laser at a repetition rate of up to 10 Hz with each pulse energy of >1 J. A FWHM linewidth of less than 1.5 nm (minimum to 1.

Wavelength-tunable passively mode-locked mid-infrared Er-doped ZBLAN fiber laser.

A passively mode-locked Er-doped ZBLAN fiber laser around 3 μm with a wide wavelength tuning range is proposed and demonstrated. The laser cavity was comprised of a semiconductor saturable absorber mirror and a blazed grating to provide a wavelength tunable feedback. The central wavelength of the mode-locked fiber laser can be continuously tuned from 2710 to 2820 nm.

Watt-level passively Q-switched heavily Er(3+)-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror.

A diode-cladding pumped mid-infrared passively Q-switched Er(3+)-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power.