A review of the developments of multi-purpose primers and adhesives comprising novel dithiooctanoate monomers and phosphonic acid monomers.

This paper reviews the developments of dithiooctanoate monomers and acidic adhesive monomers, and their roles in multi-purpose primers and adhesives in promoting adhesion to multiple substrate materials. Novel dithiooctanoate monomers exhibited excellent bonding to precious metals and alloys when compared against conventional sulfur-containing monomers. Newly developed phosphonic acid monomers, endowed with a water-soluble nature, enabled sufficient demineralization of dental hard tissues and thus improved bonding to both ground enamel and dentin.

Synthesis of novel acryloyloxyalkyl and methacryloyloxyalkyl 6,8-dithiooctanoates and evaluation of their bonding performances to precious metals and alloys.

This study investigated the bonding effectiveness of novel acryloyloxyalkyl and methacryloyloxyalkyl 6,8-dithiooctanoates (dithiooctanoate monomers) to precious metals and alloys. Eight kinds of dithiooctanoate monomers were synthesized in 16.09-39.

A review of the developments of self-etching primers and adhesives -Effects of acidic adhesive monomers and polymerization initiators on bonding to ground, smear layer-covered teeth.

This paper reviews the developments of self-etching primers and adhesives, with a special focus on the effect of acidic adhesive monomers and polymerization initiators on bonding to ground, smear layer-covered teeth. Ionized acidic adhesive monomers chemically interact with tooth substrates and facilitate good bonding to ground dentin. Polymerization initiators in self-etching primers further promote effective bonding to ground dentin.

Effects of a newly designed HEMA-free, multi-purpose, single-bottle, self-etching adhesive on bonding to dental hard tissues, zirconia-based ceramics, and gold alloy.

This study investigated the bonding effectiveness of newly designed self-etching adhesives to four types of adherends--enamel, dentin, zirconia, and gold (Au) alloy. Five experimental adhesives were prepared, which contained 3.0-5.

Effect of the combination of dithiooctanoate monomers and acidic adhesive monomers on adhesion to precious metals, precious metal alloys and non-precious metal alloys.

This study investigated the effect of the combination of a dithiooctanoate monomer and an acidic adhesive monomer on adhesion to precious metals, precious and non-precious metal alloys. From a selection of four dithiooctanoate monomers and six acidic adhesive monomers, 14 experimental primers containing a combination of 5.0 wt% of a dithiooctanoate monomer and 1.

Development of a new single-bottle multi-purpose primer for bonding to dental porcelain, alumina, zirconia, and dental gold alloy.

This study investigated the bonding efficacy of a combined primer application which comprised a silane coupling agent, an acidic adhesive monomer, and a dithiooctanoate monomer, as well as the influence of shelf life on bonding. Five experimental primers (coded as Si-P-SS-1 to Si-P-SS-4, and Si-SS as the control) were prepared using 20.0-40.

Design of a new, multi-purpose, light-curing adhesive comprising a silane coupling agent, acidic adhesive monomers and dithiooctanoate monomers for bonding to varied metal and dental ceramic materials.

A newly designed, light-curing adhesive was investigated for its bonding effectiveness to porcelain, alumina, zirconia, Au, Au alloy, Ag alloy, Au-Ag-Pd alloy, and Ni-Cr alloy. Four experimental adhesives were prepared using varying contents of the following: a silane coupling agent [3-methacryloyloxypropyltriethoxysilane (3-MPTES)], acidic adhesive monomers [6-methacryloyloxyhexyl phosphonoacetate(6-MHPA),6-methacryloyloxyhexyl3-phosphonopropionate(6-MHPP)and 4-methacryloyloxyethoxycarbonylphthalic acid (4-MET)], and dithiooctanoate monomers [6-methacryloyloxyhexyl 6,8-dithiooctanoate (6-MHDT) and 10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT)]. After all adherend surfaces were sandblasted and applied with an experimental adhesive, shear bond strengths (SBSs) of a light-curing resin composite (Beautifil II, Shofu Inc.

Design of a metal primer containing a dithiooctanoate monomer and a phosphonic acid monomer for bonding of prosthetic light-curing resin composite to gold, dental precious and non-precious metal alloys.

The effect of metal primers on adhesion of a resin composite to dental metal alloys was investigated. Experimental primers containing a dithiooctanoate monomer [10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT) or 6-methacryloyloxyhexyl 6,8-dithiooctanoate (6-MHDT)] and a phosphonic acid monomer [6-methacryloyloxyhexyl phosphonoacetate (6-MHPA) or 6-methacryloyloxyhexyl 3-phosphonopropionate (6-MHPP)] were prepared. After treating Au, Au alloy, Ag alloy, Au-Ag-Pd alloy, and Ni-Cr alloy with the experimental primers, their shear bond strengths (SBSs) with a prosthetic light-curing resin composite (Solidex, Shofu Inc.

Effect of novel dithiooctanoate monomers, in comparison with various sulfur-containing adhesive monomers, on adhesion to precious metals and alloys.

This study investigated the effect of novel dithiooctanoate monomers, in comparison with conventional sulfur-containing monomers, on adhesion to precious metals and alloys. Nine experimental primers containing 5.0 wt% 2-methacryloyloxyethyl 6,8-dithiooctanoate (2-MEDT), 6-methacryloyloxyhexyl 6,8-dithiooctanoate (6-MHDT), 10-methacryloyloxydecyl 6,8-dithiooctanoate (10-MDDT), bis(2-methacryloyloxyethyl) disulfide (BMEDS), bis(5-methacryloyloxypentyl) disulfide (BMPDS), bis(10-methacryloyloxydecyl) disulfide (BMDDS), 6-(4-vinylbenzyl-n-propyl) amino-1,3,5-triazine-2,4-dithione (VBATDT), N-(4-mercaptophenyl)methacrylamide (MPMA), or 4-methacryloyloxyethoxycarbonylphthalic anhydride (4-META; control) were prepared.

A review of the development of radical photopolymerization initiators used for designing light-curing dental adhesives and resin composites.

This paper reviews our recent studies on radical photopolymerization initiators, which are used in the design of light-curing dental adhesives and resin composites, by collating information of related studies from original scientific papers, reviews, and patent literature. The photopolymerization reactivities of acylphosphine oxide (APO) and bisacylphosphine oxide (BAPO) derivatives, and D,L-camphorquinone (CQ)/tertiary amine were investigated, and no significant differences in degree of conversion (DC) were found between BAPO and CQ/amine system (p>0.05).

Synthesis of a novel camphorquinone derivative having acylphosphine oxide group, characterization by UV-VIS spectroscopy and evaluation of photopolymerization performance.

Camphorquinone (CQ) derivatives having acylphosphine oxide (APO) group are unknown. This study synthesized such a novel 7,7dimethyl-2,3-dioxobicyclo[2.2.

A review of our development of dental adhesives--effects of radical polymerization initiators and adhesive monomers on adhesion.

This paper reviews the development of dental adhesives by collating information of related studies from original scientific papers, reviews, and patent literatures. Through our development, novel radical polymerization initiators, adhesive monomers, and microcapsules were synthesized, and their effects on adhesion were investigated. It was found that 5-monosubstituted barbituric acid (5-MSBA)-containing ternary initiators in conjunction with adhesive monomers contributed to effective adhesion with good polymerization reactivity.

Design of a new self-etching HEMA-free adhesive.

The effect of the pH value of single-bottle, self-etching 2-hydroxyethyl methacrylate (HEMA)-free adhesives on their shelf lives with bonding ability was investigated. Two experimental adhesives [SA-1 (pH=3.0); SA-2 (pH=2.

Design of a new dental adhesive--effect of a water-soluble sodium acylphosphine oxide with crown ether on adhesion to dental hard tissues.

The behavior of water-soluble photoinitiators with crown ethers in dental adhesives is unknown. This study investigated the effect of sodium acylphosphine oxide (APO-Na) with crown ether in a hydrophobic adhesive on adhesion to teeth. Sodium 2,4,6-trimethylbenzoyl-phenylphosphine oxide (TMPO-Na = APO-Na) was synthesized in 67.

UV-VIS spectra and photoinitiation behaviors of acylphosphine oxide and bisacylphosphine oxide derivatives in unfilled, light-cured dental resins.

The aims of this study were to investigate the photoinitiation behaviors of acylphosphine oxide (APO) and bisacylphosphine oxide (BAPO) derivatives in comparison to D,L-camphorquinone (CQ)/tertiary amine (EDAB) system. Fifty six kinds of experimental unfilled, light-cured resins were prepared using APO, BAPO, CQ, EDAB, resin monomers, and adhesive monomers. The measurements of ultraviolet-visible (UV-VIS) spectroscopy, photopolymerization with differential scanning calorimeter (photo-DSC) and degree of conversion (DC) determination were performed.

A review of chemical-approach and ultramorphological studies on the development of fluoride-releasing dental adhesives comprising new pre-reacted glass ionomer (PRG) fillers.

This paper reviews our recent studies on fluoride-releasing adhesives and the related studies in this field based on information from original research papers, reviews, and patent literatures. A revolutionary PRG (pre-reacted glass ionomer) filler technology--where fillers were prepared by the acid-base reaction of a fluoroaluminosilicate glass with polyalkenoic acid in water, was newly developed, and a new category as "Giomer" was introduced into the market. On fluoride release capability, SIMS examination revealed in vitro fluoride ion uptake by dentin substrate from the PRG fillers in dental adhesive.

Novel, multi-purpose, PMMA-type adhesive resin with newly synthesized microcapsule of radical polymerization initiators.

The behavior of microencapsulated polymerization initiators in dental adhesives is unknown. This study investigated the effects of new microencapsulated initiators in novel, multi-purpose, PMMA-type adhesive resin on the bonding performance and polymerization reactivity. Microencapsulated BPO and 1,3,5-trimethylbarbituric acid (TMBA) with PEMA as a shell polymer were quantitatively synthesized at 97-98% yield with 30-54 microm diameter.

Multi-purpose bonding performance of newly synthesized phosphonic acid monomers.

Multi-purpose bonding performance of three kinds of newly synthesized phosphonic acid monomers was investigated. Methacryloxyalkyl or acryloxyalkyl phosphonoacetates of 6-MHPA, 6-AHPA, 10-MDPA were synthesized in 42.8-51.

Association between the TP53 codon72 polymorphism and oral cancer risk and prognosis.

The TP53 codon72 polymorphism has recently been extensively studied to determine the risk factor for carcinogenesis. However, there are few reports about the relationship between the TP53 codon72 polymorphism and oral cancer risk or post treatment prognosis. We evaluated the genotypic distribution of the TP53 codon72 polymorphism in 100 oral cancer cases and 271 non-cancer controls.

Targeted intra-arterial carboplatin chemoradiotherapy and tegafur/uracil for oral and oropharyngeal cancer.

The aim of this study was to evaluate the usefulness of targeted intra-arterial carboplatin chemoradiotherapy in allowing less invasive surgery for patients with oral and oropharyngeal squamous cell carcinoma. Twenty patients with previously untreated squamous cell carcinoma of the oral cavity and oropharynx (T4; 8, T2; 12 patients) were treated with targeted transfemoral intra-arterial carboplatin infusion with concurrent hyperfractionated radiotherapy and the administration of tegafur/uracil (UFT). Of 20 patients, 15 underwent surgery after completion of one course of targeted chemoradiotherapy, and five were given another course or radiotherapy only.

Design of new phosphonic acid monomers for dental adhesives--synthesis of (meth) acryloxyalkyl 3-phosphonopropionates and evaluation of their adhesion-promoting functions.

The aims of this study were to synthesize new phosphonic acid monomers, and to examine their bonding performance. Four kinds of newly designed phosphonic acid monomers were synthesized, and seven experimental composite-type adhesive resins comprising the synthesized monomers (3 wt%), with BPO/DEPT/BPBA initiator were prepared. Tensile bond strengths of the adhesive resins to enamel and metal were measured with a universal testing machine at a crosshead speed of 1.

Miniplate osteosynthesis of fractures of the edentulous mandible.

This study was performed to analyze treatment of fractures of the edentulous mandible and to discuss this method in relation to the mandibular height at the fracture site. Fifteen fracture sites in 11 patients with an edentulous mandible were retrospectively examined. These fractures were located: nine fractures in the mandibular body, three in the paramedian region, and three in the mandibular angle.

[Mandibular anterior alveolar osteotomy and patient with malocculusion and facial deformity after healed mandibular fracture; report of a case].

Recent advances in orthognatic surgery have been remarkable. Among the surgical procedures, sagital ramus osteotomy has been often used for mandibular protrusion. Causes of dentofacial deformities include not only congenital but also acquired ones, which are caused by trauma or resection of tumor in the maxillofacial region.

Spontaneous regression of recurrent squamous cell carcinoma of the tongue.

A 73-year-old man presented with well-differentiated squamous cell carcinoma of the tongue (T3N0N0). After the completion of external beam radiotherapy (32 Gy) and oral tegafur-uracil (UFT) administration, the tumor had clinically disappeared. Two years later, a recurrent lesion was confirmed histologically.